willmon22 Posted February 7, 2013 Share Posted February 7, 2013 Basically it didn't have it on the bottom so I decided to file it myself. I am not sure if I did it right as it doesn't seem to draw too well. And it isn't even in a tank either. Also it seems like it is making liquid just pop out of the cartomizer into my mouth. Made my tongue a little numb for a second. Good thing I have a towel close to me since this is happening quite a bit. Link to comment Share on other sites More sharing options...
DavidBowser Posted February 7, 2013 Share Posted February 7, 2013 You might have cut it a little too big. The slots in mine are very very tiny. Link to comment Share on other sites More sharing options...
willmon22 Posted February 7, 2013 Author Share Posted February 7, 2013 Well it is acting the same way that it did before I even filed the notches. I even had it smaller but it still acted the same way. That is why I made another notch across it. Link to comment Share on other sites More sharing options...
seaspine Posted February 8, 2013 Share Posted February 8, 2013 Could be time for a new carto. Uma 1 Link to comment Share on other sites More sharing options...
willmon22 Posted February 8, 2013 Author Share Posted February 8, 2013 Yeah I think so. It has been acting like this ever since I got it. Except when I first got it and took the tank off the 2 holes in the cartomizer were enough and it worked fine. Not sure why it isn't now as I only used it twice I think. Link to comment Share on other sites More sharing options...
mcquinn Posted February 8, 2013 Share Posted February 8, 2013 Some of them are pretty bad 3 out 5 might not work.I had problems with horizontal coils.Stick to Boge's. Uma 1 Link to comment Share on other sites More sharing options...
willmon22 Posted February 8, 2013 Author Share Posted February 8, 2013 Where can I get some of these? And do they have the flange on the bottom to prevent leaking? Link to comment Share on other sites More sharing options...
Rixter Posted February 10, 2013 Share Posted February 10, 2013 (edited) I don't know what resistance level you're looking for , but here are some pre-punched LR (~1.6Ω) Boge F16 poly-filled single-coil tank cartos that worked well for me, and they're cheap, too. For other pre-punched tank cartos, try here or here. All of the tank cartos at those links have tank flanges on the bottom. Edited February 10, 2013 by Rixter Uma 1 Link to comment Share on other sites More sharing options...
mse12 Posted February 10, 2013 Share Posted February 10, 2013 The flanges aren't really important. I've never had a tank come off. You can get boges at many vendors. theveteranvapor (sp?) carries them. You will have a punch them I'm sure. That is easy though. Link to comment Share on other sites More sharing options...
willmon22 Posted February 10, 2013 Author Share Posted February 10, 2013 Those are cheap. Thanks rixter. I will get some in the future. mse12 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now