mse12 Posted January 8, 2013 Share Posted January 8, 2013 I will take the first post here to welcome everyone to the new sub! This space is dedicated to all of the so-called advanced pv's out there. This could be anything from a Darwin to a first gen LT to the tried and true Provari. I hope this space proves to be beneficial to all. So anything dealing with an advance pv can be put here. Questions are welcome. Uma, Rixter, NigelCollins and 1 other 4 Link to comment Share on other sites More sharing options...
Rixter Posted January 9, 2013 Share Posted January 9, 2013 (edited) @mse12 Aaaaaaaahhhhhhhhh!!! Your first "sticky" :clap: :clap: :clap: :clap: :clap: Dude! You got pinned! (what's the prize for second post in a new sub?) Edited January 9, 2013 by Rixter Uma and mse12 2 Link to comment Share on other sites More sharing options...
bill45005 Posted January 10, 2013 Share Posted January 10, 2013 welll guess I am # 3 post lol have been using my EVIC since last friday . I think it is great . I use it with a viva nove and 1.8 coil with no problems . have also put a 2.4 ohm vision on it and a couple different caro tanks all worked well . set on 4.8 volts and 14.1 watts with the viva nova it is my sweet spot . it is a lot lighter than my vamoo and a bit shorter . it is about the same weight as a lava tube . all the trick menu,s are fun lol but not a lot of usfull info .... I dont care how many times I have puffed etc but it is kinda neet Performance wise it is great , with the above mentioned setting and a 2600 mah battery that comes with it it will last almost 2 days on a charge , but I have been charging it every night . I puff a lot so those are good figures for comparison a twist set on 4.2 v and with a vision 2.4 my between charge time is about 8 to 10 hours Great product IMO well made and with the computer hookup about as hi tech as there is out there Rixter, mse12 and Uma 3 Link to comment Share on other sites More sharing options...
Uma Posted January 10, 2013 Share Posted January 10, 2013 Just a heads up reminder about warm buttons, courtesy of HealthCabin because of the new Vamo's V2 spring. (an SB spring or Helix spring (hot springs) work great) Emergency Notice Dear customers, We are very sorry to inform you that we stop selling eGo Bamboo APV(Stainless/Chrome/Black Chrome) for a while because the big wide spring in the cap has big resistance, which makes the Bamboo cap very hot when Bamboo is working, especially when Bamboo works at a high Voltage or Wattage with a low resistance atomizer. We are working on new good springs with low resistances and expect to get new springs ready in some days. We will resume selling the products and their caps when the new springs are ready.If you have Bamboos (Vamo's) with the wider big wrong springs, please stop using the products and contact us by ticket system. We are very sorry for the inconvenience. If you have any questions or need any assistance, please feel free to let us know by using Help Desk and submiting a ticket. We look forward to always being able to serve you better. Health Cabin mse12 1 Link to comment Share on other sites More sharing options...
EvilM0dder Posted April 4, 2013 Share Posted April 4, 2013 Hey guys! Not sure if I'm posting this in the right thread or not. But I'm looking for a schematic for a veritable voltage circuit. I was trying to get one from Madvapes but always out of stock. Thanks guys. Link to comment Share on other sites More sharing options...
Lavafirecig Posted May 8, 2013 Share Posted May 8, 2013 i like vw too, but i dont know what wattage needs what atomziers, i am afraid of burning it out. any good suggestions for me? i get used of the riva-t series. thanks a lot @hope_photography123 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted November 13, 2014 Share Posted November 13, 2014 OK hi there.. I just received a vamo mod v5 from fasttech.. Git a kanger Protank and nautilus aspire.. The darn thing just keeps turning off. . .? Besides that I have a issue with the 510 connection with the kanger only one of my tanks that doesn't fit. Yet a tugboat would work. Link to comment Share on other sites More sharing options...
@hope_photography123 Posted November 13, 2014 Share Posted November 13, 2014 If you have a atty tank with replacement coils. @lavafirecig then it's basically a taste thing start low work it higher a little bit at a time when you are happy you're not going to blow it up... That's the advanced part.. Link to comment Share on other sites More sharing options...
smacksy Posted December 16, 2014 Share Posted December 16, 2014 I will take the first post here to welcome everyone to the new sub! This space is dedicated to all of the so-called advanced pv's out there. This could be anything from a Darwin to a first gen LT to the tried and true Provari. I hope this space proves to be beneficial to all. So anything dealing with an advance pv can be put here. Questions are welcome. [emoji106] Great, but I can't seem to find a mechanical sub-forum..I own 3 mech mods and 4 VW mods so I kind of like to like to visit both sub forums..thanks! Link to comment Share on other sites More sharing options...
Jeffb Posted December 17, 2014 Share Posted December 17, 2014 Great, but I can't seem to find a mechanical sub-forum..I own 3 mech mods and 4 VW mods so I kind of like to like to visit both sub forums..thanks! Not a mechanical sub forum but what is there to a mech mod besides a tube and a switch : http://www.vaportalk.com/forum/forum/334-rebuildable-atomizer-systems/ Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 Unless you add a kick? Not sure I understand the way a kick exactly works but I believe that it varies the voltage /wattage... And has a fuse? But I honestly have not looked into them to much more than hearing about them...? Link to comment Share on other sites More sharing options...
smacksy Posted December 17, 2014 Share Posted December 17, 2014 Not a mechanical sub forum but what is there to a mech mod besides a tube and a switch : http://www.vaportalk.com/forum/forum/334-rebuildable-atomizer-systems/ Well a lot actually..voltage drop, copper or stainless, hybrid top cap maybe, spring or magnetic switches, mods and prices, recessed button or a damn locking ring, authentic or clones, etc..maybe I'm on the wrong forum..lol Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 Well a lot actually..voltage drop, copper or stainless, hybrid top cap maybe, spring or magnetic switches, mods and prices, recessed button or a damn locking ring, authentic or clones, etc..maybe I'm on the wrong forum..lol Jeff.. No i here you... I have both myself and I'm just starting to vape on mec mods (or should I say my first mec mod) and I'd love to discuss much more of the stuff u mentioned there is a forum for mec mods.. I'm on tap talk though.. So I can't link u.. But I'm learning all of these.. Just start a thread in mods topics? smacksy 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 Jeff Select start topic and it gives you a choice? Link to comment Share on other sites More sharing options...
smacksy Posted December 17, 2014 Share Posted December 17, 2014 Jeff.. No i here you... I have both myself and I'm just starting to vape on mec mods (or should I say my first mec mod) and I'd love to discuss much more of the stuff u mentioned there is a forum for mec mods.. I'm on tap talk though.. So I can't link u.. But I'm learning all of these.. Just start a thread in mods topics? I'm on Tapatalk too..but I do belong to several other forums that have plenty of sub forums on mechs..so its no big deal here..thx Link to comment Share on other sites More sharing options...
Jeffb Posted December 17, 2014 Share Posted December 17, 2014 We used to have a "Cloud Chasing" sub forum here where mechs & RBA's etc were discussed. That forum was changed to "Rebuildable Atomizer Systems." If there is enough interest to develop a seperate Mech Mod sub forum it would be very easy to develop. @hope_photography123 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 [emoji297] [emoji297] [emoji297] [emoji297] [emoji297] Jeff I began I general mod issues topic in moding? Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 I'm sry in... general modding... Link to comment Share on other sites More sharing options...
Jeffb Posted December 17, 2014 Share Posted December 17, 2014 Technically the "General Modding" forum is for building PV's not necessarily mech mods @hope_photography123 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 There is an option for your own sub forum as well? Why not start it? Link to comment Share on other sites More sharing options...
Jeffb Posted December 17, 2014 Share Posted December 17, 2014 There is an option for your own sub forum as well? Why not start it? The godfather of the forum would have to develop the sub forum. @hope_photography123 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 No I was wrong that's if u are a supplier... Sry Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 The godfather of the forum would have to develop the sub forum. Yes I saw that... So wats up anyway.. Sry were blowing up the topic... But I'm curious are u building or vaping with interest in conversation learning ect? Link to comment Share on other sites More sharing options...
smacksy Posted December 17, 2014 Share Posted December 17, 2014 (edited) All I can say I know there is a lot of us out here that love our mechs and look for good sources of info on them. I'm on the west coast and in every B&M shop I've visited all the guys use mechs, and believe me there is a lot shops here in San Diego county..they got there choice and the fact they choose mechs over amped up VW devices says alot..I personally favor mechs as I've had both.. These are just a few of my mechs Edited December 17, 2014 by smacksy @hope_photography123 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 Can I ask wat u have there smacksy.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now