mse12 Posted December 29, 2012 Share Posted December 29, 2012 So I picked up a VAMO from electronicstix.com. I love this device but I've run into a problem. On my device the first battery tube that is supposed to be attached to the head comes off. This tube is just pressed onto the head. When I first received the device the device was "bent" and I realized that this tube was tilted to one side. I was able to push it back into place and all seemed fine. Now after about a week of daily use this tube is coming off more freely. I fear this is going to become an issue of just falling off. I have not contacted the vendor yet and I just wanted to see if anyone else has encountered this. I love the performance of the vamo but I have to figure out how to attach this in a more permanent fashion. Any insight will be great! Pics should be attached. -mse12 Heavyrocker58 1 Link to comment Share on other sites More sharing options...
Rixter Posted December 29, 2012 Share Posted December 29, 2012 (edited) I have not contacted the vendor yet... Contact the vendor. If it were me, I'd let them know right away, and explain that you weren't sure it wasn't supposed to break down that far. lol They'll more than likely RMA it for you with no problem...they're pretty reputable. If not, raise **** on the forums about it. My 2¢ worth. Edited December 29, 2012 by Rixter Link to comment Share on other sites More sharing options...
mse12 Posted December 29, 2012 Author Share Posted December 29, 2012 I agree, I actually sent them an email immediately after posting this...while it was fresh on my mind. I'll find out what they will do about it. It may be fine I just haven't heard anyone else talking about this. I don't want it to become something that just falls apart every time I use it. I have been using this device daily since the 24th and I love it! The device operates perfectly I'm just kinda loss about this tube coming off. If this tube is designed to come off it should be threaded IMO. If it isn't meant to come off then attach it in a way that it won't. -mse12 Link to comment Share on other sites More sharing options...
Rixter Posted December 29, 2012 Share Posted December 29, 2012 @mse12...Have you seen post yet? Link to comment Share on other sites More sharing options...
mse12 Posted December 29, 2012 Author Share Posted December 29, 2012 I have, the only reason that I didn't respond is because I have not tried it with an 18350 or two 18350's. I only have 18650's so I've been using the single 18650 option. Even if I bought a couple 18350's I'd have to buy another charger as well...that sucks. lol Rixter 1 Link to comment Share on other sites More sharing options...
Uma Posted December 29, 2012 Share Posted December 29, 2012 The NiteCore intellicharger i4 is a good one... charges all sizes, even the 25**** . Don't even need spacers for the 18350's either, cuz it's spring loaded. Wow, well, now I know one of the corner cutting procedures they took in order to keep the price way low. I'm sure there'll be a jimmy-rig fix for it soon. Liquid nails, duct tape and baling twine, rubber band bungee cord, drills and gasket screws, .... That's a shame. Hopefully, in time, they'll come up with a good overall quality built one without any cut corners. I'm sure we'll all jump on them, knowing how much we love the cheap version. I'm awaiting JeepBear's next coop for the SS version. Rixter 1 Link to comment Share on other sites More sharing options...
Rixter Posted December 29, 2012 Share Posted December 29, 2012 Hopefully, in time, they'll come up with a good overall quality built one without any cut corners. They already have. Link to comment Share on other sites More sharing options...
Uma Posted December 29, 2012 Share Posted December 29, 2012 They already have. haha, yeh, those are really nice for the buck too. They should be after all the work, communicating, that Rusalka and Sanjose put into it for the coop folk. (which, incidentally, finally went live yesterday!). But, I still like the user-friendly menu of the Vamo much better. We need Rusalka and Sj to host an SS Vamo coop! Rixter 1 Link to comment Share on other sites More sharing options...
Uma Posted December 31, 2012 Share Posted December 31, 2012 So, I asked around, and from what I gather, they are supposed to be slip on in order to keep the wires from twisting up. Most of them stay together, but a few, like yours, have indeed slid apart. Hopefully the store where you bought it will be able to replace it. The next one should be stout, according to the odds... Link to comment Share on other sites More sharing options...
mse12 Posted December 31, 2012 Author Share Posted December 31, 2012 Hmm...when my tube comes off I see no wires. They must all be inside the head. Uma 1 Link to comment Share on other sites More sharing options...
mcquinn Posted December 31, 2012 Share Posted December 31, 2012 Jason is a good dude I am sure he will make it right.Just give him a fair chance. Uma 1 Link to comment Share on other sites More sharing options...
Uma Posted December 31, 2012 Share Posted December 31, 2012 It didn't make since to me either, but that's the word that came down the pipeline. (hehe, pardon the pun) Link to comment Share on other sites More sharing options...
bill45005 Posted December 31, 2012 Share Posted December 31, 2012 Hmmmm first I have heard of this problem but if you bought from a good retailer he should make it right . I have a joyech ego twist , a vamo a lava tube and a pro vari IMO the vamo is #1 the twist is #2 the pro vari is good but not worth the hi price the lavatube is good but no adjustable watts , but all are so much better that non adjustable that there is no comparison Uma 1 Link to comment Share on other sites More sharing options...
Heavyrocker58 Posted December 31, 2012 Share Posted December 31, 2012 So I picked up a VAMO from electronicstix.com. I love this device but I've run into a problem. On my device the first battery tube that is supposed to be attached to the head comes off. This tube is just pressed onto the head. When I first received the device the device was "bent" and I realized that this tube was tilted to one side. I was able to push it back into place and all seemed fine. Now after about a week of daily use this tube is coming off more freely. I fear this is going to become an issue of just falling off. I have not contacted the vendor yet and I just wanted to see if anyone else has encountered this. I love the performance of the vamo but I have to figure out how to attach this in a more permanent fashion. Any insight will be great! Pics should be attached. -mse12 P1020203.JPG P1020206.JPG P1020208.JPG You have a me concerned now,i thought the vamo was a solid constructed machine,maybe its designed this way too service the electronics inside,bit you say it isnt threaded? Link to comment Share on other sites More sharing options...
mse12 Posted January 1, 2013 Author Share Posted January 1, 2013 You have a me concerned now,i thought the vamo was a solid constructed machine,maybe its designed this way too service the electronics inside,bit you say it isnt threaded? The third picture is a picture of the bottom of the head. Zero threads. I'm assuming they didn't expect this tube to come apart. Jason is a good dude I am sure he will make it right.Just give him a fair chance. I will give him a chance. I emailed him the day I started this thread. No response as of yet but I understand the weekend and holiday so I'll give him a few days. I'm hoping he will help me out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now