Mike Posted December 21, 2012 Share Posted December 21, 2012 I'm having a newbie moment wondering about a particular battery. I have a couple of mods that take a single 14500 battery. My Mark's mod and VV Robust A that I recently picked up. It was recommended that I use AW batteries in the Robust so I got 2 which are 600mAh. The one that I've been using in my Marks mod is a UltraFire and 900mAh. This battery is over 3 years old and it was one I used with my very first e-cig(701 e-cigar). Needless to say, this battery has a lot of cycles on it and it is pretty much toast but it WAS a good battery. The 2 new AW's I have don't last as long as the UltraFire did and one of them is a dud and only lasts a few vapes. My question is which battery should I get for these 2 PV's? I'd like to have 900mAh, Does AW have these or should I go with a different kind? I've always read that AW's are the best but are they really? Link to comment Share on other sites More sharing options...
Jeffb Posted December 21, 2012 Share Posted December 21, 2012 Ive heard these are pretty good http://www.smoktek.com/Efest-IMR14500-700mAh-37V-Rechargeable-LiMn-battery-2-pack_p_321.html Link to comment Share on other sites More sharing options...
Mark Posted December 21, 2012 Share Posted December 21, 2012 AWs are "high drain" which means they can handle more current but I've found that they do not hold a charge as long (IMHO). You can use these in your Marksmod. Hmmmm? Won't let me paste the link. I use either trustfire or ultrafire 14500s from Madvapes. Link to comment Share on other sites More sharing options...
mcquinn Posted December 22, 2012 Share Posted December 22, 2012 The IMR's discharge faster but when charged you get more current faster so things heat up quicker,they do drain down quicker though.I tried them but ended back with Trustfire 900 mAh 14500's as the best balance between usefull life and cost.The IMR's I had were flat tops ,so I have to use a spacer to make contact in my boxmods,kind of a pain.I supose I could put a blob of solder on the connector . Link to comment Share on other sites More sharing options...
Vesuvius Posted January 16, 2013 Share Posted January 16, 2013 Alot of that all has to do with the C rating of the battery. In general, the mAh rating, in most cases will not matter, what really matters in my experience, is the actual C rating of the battery itself. In my own personal mods that I make, that do not use standard lithium ion batteries, but lithium polymer battery packs, I always use a high C rated battery (20C rated, with a 40C burst rate, or higher. 20C at a minimum), and these alaways have a much better performance, simply because they have a much higher load handling capacity, and a better chemistry than LiOn. Just my opinion of course. Link to comment Share on other sites More sharing options...
mse12 Posted January 16, 2013 Share Posted January 16, 2013 IMR batteries are LiMn which is a safer chemistry than Li-ion....the c ratings represent the max discharge rate. I think 20C is overkill but that's just my opinion. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now