kvjeff73 Posted December 18, 2012 Share Posted December 18, 2012 I want a cartomizer, or clearomizer, or some other *&$%^ thing that actually works, consistently. I am using 100% VG (Boba’s bounty and some other Vapor Room stuff that is thicker than Boba’s) so I don’t know if that’s the problem? I was using 60/40 PG/VG and early on and still had the issues with the moonbeams, stardusts, and DCT. I’ve tried: “Moonbeam” - works OK, just burns a little hot and resistance and life span on these seems variable. Stardust/vision clearomizer - everyone I’ve tried gives a burnt taste at least every 3rd hit. Smoketech DCT: constant flooding and/or burnt taste. Kanger T3 bottom fed: floods floods floods. Kanger T2: almost thought I had found a good system, but floods at least once a day. Replacement coils are different than the originals that came with the tank (WTF?). I don’t care how much it costs, is there ANY delivery system that will JUST WORK? Consistantly? Am I asking for too much here? Link to comment Share on other sites More sharing options...
Jeffb Posted December 18, 2012 Share Posted December 18, 2012 (edited) I've had pretty good luck with the Vivi Nova tank. Also you need to remember that if you're using 100% VG, it takes a little longer for that thick juice to wick. You may have to wait a little longer between puffs. Edited December 18, 2012 by jeffb Link to comment Share on other sites More sharing options...
SABOTEUR Posted December 18, 2012 Share Posted December 18, 2012 (edited) First off, I know virtually nothing about "systems"; I've found what works for me and I'm satisfied. I HAVE noticed over the past 3 years that not all juice is created equal. It might TASTE great, but you pay hell trying to vape it. It just seems to me that its possible the juice is more of a problem than what you're vaping with. I don't KNOW, as I've said, but its worth considering. Edited December 18, 2012 by SABOTEUR Link to comment Share on other sites More sharing options...
kvjeff73 Posted December 18, 2012 Author Share Posted December 18, 2012 First off, I know virtually nothing about "systems"; I've found what works for me and I'm satisfied. I HAVE noticed over the past 3 years that not all juice is created equal. It might TASTE great, but you pay hell trying to vape it. It just seems to me that its possible the juice is more of a problem than what you're vaping with. I don't KNOW, as I've said, but its worth considering. Thanks for your input. I'm still open to that possibility but I seem to have the same problems with 100% VG and 60% PG/40%VG mix. PG makes me feel like crap, but I do still have one bottle around for these types of experiments. Link to comment Share on other sites More sharing options...
kvjeff73 Posted December 18, 2012 Author Share Posted December 18, 2012 I've had pretty good luck with the Vivi Nova tank. Also you need to remember that if you're using 100% VG, it takes a little longer for that thick juice to wick. You may have to wait a little longer between puffs. True, but oddly enough I've never gotten dry hits from the T2 or T3. The burnt taste from the visions I'm attributing to slow wicking, but they are the only one I've had that issue with. The DCT I tried was with a mostly PG juice. I've steered away from the Vivi tanks because it seems so many have leaking issues. Not the case with you? Link to comment Share on other sites More sharing options...
Viper Ron Posted December 18, 2012 Share Posted December 18, 2012 I've had a Vivi Nova for over 3 months and no one leaking issue to date Link to comment Share on other sites More sharing options...
Jeffb Posted December 18, 2012 Share Posted December 18, 2012 True, but oddly enough I've never gotten dry hits from the T2 or T3. The burnt taste from the visions I'm attributing to slow wicking, but they are the only one I've had that issue with. The DCT I tried was with a mostly PG juice. I've steered away from the Vivi tanks because it seems so many have leaking issues. Not the case with you? I only have leaking issues if I fill it up too much. Link to comment Share on other sites More sharing options...
Christopher Posted December 18, 2012 Share Posted December 18, 2012 While cartomziers (Boge) have worked great for me, I have to chime in say I've heard a lot of good things about the Vivi Nova tanks as listed here. Enough so, that I'm going to pick myself up one this week and see what it's all about. Link to comment Share on other sites More sharing options...
mcquinn Posted December 18, 2012 Share Posted December 18, 2012 I agree with the liquid blame as a lot of folks use all those devices with great success.I am personally a fan of Boge carto's and Vivi 2.0 mini Nova's.I would try another brand of liquid. Link to comment Share on other sites More sharing options...
kvjeff73 Posted December 27, 2012 Author Share Posted December 27, 2012 Thanks for the input everyone, I really appreciate it. The T2 has been doing a little better for me, only floods a few times a day. Not too much wasted juice. One thing that confuses me, if I'm using thick 100% VG, I understand that it will take longer to wick-but shouldn't it flood LESS than the thinner mixtures? Any feedback on the CE3 bottom feeders? Link to comment Share on other sites More sharing options...
Rixter Posted December 27, 2012 Share Posted December 27, 2012 (edited) I started vaping on April 8, 2012, and since then, I've tried out variations on just about every new juicer that's come down the pike . IMO, if you want the same vape every time, nothing beats a good ol' freshly filled Boge carto for consistency and simplicity. It's sort of like the McDonald's cheeseburger of juicers...it may not be as fancy as the other stuff out there, but with the Boge carto (and the McDonald's cheeseburger), you know what you're gonna get every time...a good quality vape (err...cheeseburger). Edited December 27, 2012 by Rixter GreenKnight 1 Link to comment Share on other sites More sharing options...
blucavvy Posted December 27, 2012 Share Posted December 27, 2012 my vote goes towards a good vv device, and a solid de-bridged/de-wicked atomizer. you can dial in the juice's "sweet spot" and the vape is second to none on a good atomizer when compared to any carto/clearo imho. Tam and Rixter 2 Link to comment Share on other sites More sharing options...
Rixter Posted December 27, 2012 Share Posted December 27, 2012 (edited) my vote goes towards a good vv device, and a solid de-bridged/de-wicked atomizer. you can dial in the juice's "sweet spot" and the vape is second to none on a good atomizer when compared to any carto/clearo imho. I second that. I love my 901 drip atties...better flavor than any carto by far, but also a slightly higher maintenance level than a carto, and can be a little inconsistent in performance from one pull to to the next. I enjoy tinkering with my juice mods, but as far as being simplistic, I just can't think of anything easier and more consistent than Boge cartos. Edited December 27, 2012 by Rixter Link to comment Share on other sites More sharing options...
Tam Posted December 27, 2012 Share Posted December 27, 2012 Rixter recommended Boge brand atomizers to me for direct dripping and I've been stuck on them ever since. They consistently just...work. Some of the other atties I've tried are more a hit or miss, for me anyway. Rixter 1 Link to comment Share on other sites More sharing options...
DAYVAPE Posted December 27, 2012 Share Posted December 27, 2012 (edited) I've had some seriously great luck with these: http://www.empiremods.com/product_p/brdg5105.htm To finish off the package... grab yourself a 'drip shield'(and sealed 510 extension if needed... don't need with a eGo batt), a Cherry Vape 'Universal' (http://www.empiremods.com/product_p/chrryuni.htm), and a 'drip tip'... and you are good to go. The 'Universal' allows you to seriously drip 6 - 8 drops of ejuice and not have to worry at all about juice spitting back in your mouth when you vape. I use them all the time because of this one feature they provide so well.... I had finally quit using atties with just a drip tip because of getting 'juiced' all the time. This is now a thing of the past and I can load an atty with 8 drops every single time! Heavenly. Edited December 27, 2012 by DAYVAPE Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted December 27, 2012 Share Posted December 27, 2012 I second the rec for Empire Mods and the universal drip tip. Not only does this funny looking over-long drip tip keep you from getting juice in your mouth, it also helps to cool the vapor a bit. I don't care for warm vapor, especially when I'm chain vaping using the direct drip method. DAYVAPE 1 Link to comment Share on other sites More sharing options...
DAYVAPE Posted December 27, 2012 Share Posted December 27, 2012 (edited) I second the rec for Empire Mods and the universal drip tip. Not only does this funny looking over-long drip tip keep you from getting juice in your mouth, it also helps to cool the vapor a bit. I don't care for warm vapor, especially when I'm chain vaping using the direct drip method. Yep! Using an eGo with one of those 1.5 ohm 510 atties... a drip shield... a Universal... and a drip tip right now at work! Perfect setup. Oh yeah... AND 8 drops of ZOMBIE BLOOD ! Edited December 27, 2012 by DAYVAPE Uma and Tam 2 Link to comment Share on other sites More sharing options...
kvjeff73 Posted January 9, 2013 Author Share Posted January 9, 2013 I've had some seriously great luck with these: http://www.empiremods.com/product_p/brdg5105.htm To finish off the package... grab yourself a 'drip shield'(and sealed 510 extension if needed... don't need with a eGo batt), a Cherry Vape 'Universal' (http://www.empiremods.com/product_p/chrryuni.htm), and a 'drip tip'... and you are good to go. The 'Universal' allows you to seriously drip 6 - 8 drops of ejuice and not have to worry at all about juice spitting back in your mouth when you vape. I use them all the time because of this one feature they provide so well.... I had finally quit using atties with just a drip tip because of getting 'juiced' all the time. This is now a thing of the past and I can load an atty with 8 drops every single time! Heavenly. Thanks, I think I'll try dripping. So, how often do you need to clean the bridgeless atties? What about when you switch flavors, do you need to rinse it out or soak in vodka overnight?? Link to comment Share on other sites More sharing options...
mse12 Posted January 9, 2013 Share Posted January 9, 2013 I usually rinse in hot water when/if the flavor gets funky. Make sure to blow/shake them out and let air dry on a napkin overnight. Link to comment Share on other sites More sharing options...
bill45005 Posted January 10, 2013 Share Posted January 10, 2013 Ok everybody is jumping in here so I guess I will also The 100% vg will not wick fast enough if you puff it one after another or long hard deep puffs . 80/20 or 70/30 with the high # being the pg is much better . also the flavor is a problem at times things like cinnamon etc The viva nova is great no leaks doesnt burn either , but dont let the fluid get to low if you puff a lot the wicking is the problem so try to find a pg juice you like IMO the the "bottom coils caromizer dont work good the visions have worked good for me with a 2.4 coil at 4.2 volts on my Twist I use a vision but on the evic , the lava tube and the vamoo I use vivanova Link to comment Share on other sites More sharing options...
kvjeff73 Posted January 10, 2013 Author Share Posted January 10, 2013 Ok everybody is jumping in here so I guess I will also The 100% vg will not wick fast enough if you puff it one after another or long hard deep puffs . 80/20 or 70/30 with the high # being the pg is much better . also the flavor is a problem at times things like cinnamon etc The viva nova is great no leaks doesnt burn either , but dont let the fluid get to low if you puff a lot the wicking is the problem so try to find a pg juice you like IMO the the "bottom coils caromizer dont work good the visions have worked good for me with a 2.4 coil at 4.2 volts on my Twist I use a vision but on the evic , the lava tube and the vamoo I use vivanova Thanks everyone! Love to hear different opinions. I keep hearing how VG is not going to wick properly, but my experience isn't a problem with it wicking slowly, I have flooding problems not wicking problems!! The gods of vaping must have heard my call, because since the original post the Kanger T2s' have been kicking butt! I might get a flood once a day at most. Taste is awesome too. (FYI) Back to juices; Vaperrenus' 100% VG is super thick (but again I had no wicking problems), compared to AVE which is very thin. I'd go back to analogs before using a juice with any PV in it. It gives me super dry throat, nose bleeds, and headaches. Link to comment Share on other sites More sharing options...
kvjeff73 Posted January 10, 2013 Author Share Posted January 10, 2013 I've had some seriously great luck with these: http://www.empiremods.com/product_p/brdg5105.htm To finish off the package... grab yourself a 'drip shield'(and sealed 510 extension if needed... don't need with a eGo batt), a Cherry Vape 'Universal' (http://www.empiremods.com/product_p/chrryuni.htm), and a 'drip tip'... and you are good to go. The 'Universal' allows you to seriously drip 6 - 8 drops of ejuice and not have to worry at all about juice spitting back in your mouth when you vape. I use them all the time because of this one feature they provide so well.... I had finally quit using atties with just a drip tip because of getting 'juiced' all the time. This is now a thing of the past and I can load an atty with 8 drops every single time! Heavenly. Yesterday I saw a vid on how to removed your bridge on an atty so you can drip on to it. I did this on two atties I had, one had been used and one not. Can't say I was impressed with either. Will the atties that are made for dripping work better? Link to comment Share on other sites More sharing options...
Edmuund Posted January 14, 2013 Share Posted January 14, 2013 (edited) I was using 60/40 PG/VG and early on and still had the issues with the moonbeams, stardusts, and DCT. Edited January 14, 2013 by Edmuund Link to comment Share on other sites More sharing options...
kvjeff73 Posted January 15, 2013 Author Share Posted January 15, 2013 I got some LR Boges in the mail yesterday from iVape. I can see why people like them, they are definately consistent. Work fine with my all VG. They don't mute the flavor as much as DCTs' but still not as tasty as the T2. Link to comment Share on other sites More sharing options...
kvjeff73 Posted January 30, 2013 Author Share Posted January 30, 2013 I've had some seriously great luck with these: http://www.empiremods.com/product_p/brdg5105.htm To finish off the package... grab yourself a 'drip shield'(and sealed 510 extension if needed... don't need with a eGo batt), a Cherry Vape 'Universal' (http://www.empiremods.com/product_p/chrryuni.htm), and a 'drip tip'... and you are good to go. The 'Universal' allows you to seriously drip 6 - 8 drops of ejuice and not have to worry at all about juice spitting back in your mouth when you vape. I use them all the time because of this one feature they provide so well.... I had finally quit using atties with just a drip tip because of getting 'juiced' all the time. This is now a thing of the past and I can load an atty with 8 drops every single time! Heavenly. Ok, so I got my Cherry Vape extension, 901 bridgeless atty (with 901/510 adapter) 1.7 Ohm (using with 3.7 V Ego), and a drip shield (already have a few drip tips). Put in 6 drops of liquid and let it sit, right side up, for ten minutes. First couple vapes didn't give me much vapor or flavor. After four puffs tasted burnt. I put in 5 drops, waited a minute and puffed. Tried puffing gently, sharply, and everywhere inbetween. After a few puffs I started getting some decent vapor without too much gurgling but it wasn't consistant. Some puffs had good flavor but I wouldn't say better than my T2. The last time I loaded it up with 8 drops, and all it did was gurgle the first few puffs, then gave a few decent tasting ones, then started tasting burnt. Washed everything up and put in drawer with the rest of my "ehh" stuff. Any suggestions on my technique? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now