darren1441 Posted November 12, 2012 Share Posted November 12, 2012 hi i recently bought a ego-t and it came with a ce4+ but it was broke so i bought a ce5 everythings great but when i take it of to fill it i notice a bit of e-liquid or condensation on my battery is this normal ? also hoe do i change flavours/cleam it out ? thanks Link to comment Share on other sites More sharing options...
Jeffb Posted November 12, 2012 Share Posted November 12, 2012 A little condensation or juice buildup is pretty normal with these. The eGo batts are sealed so it wont cause problems, just take a tissue and clean it out. Link to comment Share on other sites More sharing options...
darren1441 Posted November 12, 2012 Author Share Posted November 12, 2012 hi thanks for the reply how are the batts sealed nd how often should i wipe it also how do i put a new flavour in and wash ? please thanks. Link to comment Share on other sites More sharing options...
Jeffb Posted November 12, 2012 Share Posted November 12, 2012 (edited) The batts are sealed so juice won't leak down into the inner workings of the batt and cause issues. As far as the CE5's, I dont clean mine so I cant be help to you there. I assume rinsing them out and letting them dry would probably work. ps... I deleted your 2 other posts. There is no sense in posting the same question throughout the forum. Edited November 12, 2012 by jeffb Link to comment Share on other sites More sharing options...
darren1441 Posted November 13, 2012 Author Share Posted November 13, 2012 fair enough so with u having a ce5 like me when should i put a diffrent flafourd juis exe my blueberry is at 0.4 mils now and i want to change to my mango lol what should i do ? oh nd btw have u tried mango blueberry is quite nice tbo Link to comment Share on other sites More sharing options...
Jeffb Posted November 13, 2012 Share Posted November 13, 2012 I tend to vape juices that are similar such as coffee and tobacco juices so I just dump some tobaccy juice on top of my coffee juice. I dont usually vape fruity or bakery type juices. Link to comment Share on other sites More sharing options...
darren1441 Posted November 13, 2012 Author Share Posted November 13, 2012 fair enough anyways how do i switch juices ? Link to comment Share on other sites More sharing options...
mcquinn Posted November 13, 2012 Share Posted November 13, 2012 I would just have extras for huge flavor swings like that.I also just dump similar flavors in my Visions.I have cleaned them but it is a lengthy process letting them dry out .If you don't they vape pretty crappy until all the water gets vaped out.I tend to vape through a whole bottle before switching flavors.To try other flavors I have some 306 or 510 atties for dripping. Link to comment Share on other sites More sharing options...
darren1441 Posted November 13, 2012 Author Share Posted November 13, 2012 mcquinn check ur msgs Link to comment Share on other sites More sharing options...
kitsune Posted November 13, 2012 Share Posted November 13, 2012 For me, I shake out any excess liquid, quick rinse with water, shake out and fill with new liquid. the first couple hits may be a bit watery but it clears pretty quick. If the flavors are similar, I just mix them. since both fruit flavors, you can just empty any remaining of the previous flavor, shake it out a bit and add new flavor. Link to comment Share on other sites More sharing options...
Rixter Posted November 13, 2012 Share Posted November 13, 2012 (edited) I run hot water into it and empty it several times, blow out any excess water, and then stick it on a window sill for about a day or so to completely dry out. That seems to get any left-over flavors out. You can follow the rinsing process with a PGA rinse (I use EverClear) to help speed up the evaporation process if you want. Edited November 13, 2012 by Rixter Link to comment Share on other sites More sharing options...
willmon22 Posted November 14, 2012 Share Posted November 14, 2012 To get the condensation out I think the best way is to use a q-tip and dry it out. And for changing flavors it is easy enough just get your clearomizer and put it in hot water along with the atomizer head. Then after awhile just take them out and squeeze the wicks of water and let it dry for 10 minutes or how ever long you feel is best. Afterwords make sure the coil is lined up center in the atomizer head so it doesn't burn up if it comes in contact with the metal walls of the head. Then you can put in the new eliquid and you should be good to go. After awhile the atomizer won't perform well no matter how many times you let it soak in hot water. That is when you can get some vodka or everclear and let it soak and then do the same process as you did with the hot water to let them dry out. Then it should perform about half as good when it was new or better but I wouldn't guarantee it. This may or may not work for you and some may not do this method at all with the vodka or everclear but it is up to you to do it. If others think this is a bad idea please be sure to say so so I don't do it eventually. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now