willmon22 Posted November 1, 2012 Share Posted November 1, 2012 I just got my package today from ecfblends and I am using an ego that was given to me. The ejuice I am using is as follows: 1 x 01 Create Your Own Malt (Bottle Size: 5 ml $2.50, Nic Strength: 24 mg - Strong, Base Mix: 50% PG / 50% VG, Additional Sweetener: Enhanced Sweetener, Add a Flavor 1: Add Vanilla, Add a Flavor 2: Add Root Beer, Add a Flavor 3: Add Cookie, Name Your Creation: rootbeerfloat)I am not minding the cool vapor much but I was thinking it should be at least partially warm. But I am getting an outstanding throathit from it which is what I mainly want. What I am wondering is if I get the ego-v that goes from 3-6 volts will the vapor not be cool anymore and actually get warm to a little hot? What I am using is a dual-coil tank made by smok tech. Link to comment Share on other sites More sharing options...
mcquinn Posted November 1, 2012 Share Posted November 1, 2012 If you are going to use dual coil and want warmer vapor you will either have to lower the resistance of the carto's or raise the voltage on the battery. Christopher 1 Link to comment Share on other sites More sharing options...
willmon22 Posted November 1, 2012 Author Share Posted November 1, 2012 It is 1.5 ohms. And from what I heard even though it is low since there is 2 coils it would equal 3 ohms so then it would still work with higher voltage. Link to comment Share on other sites More sharing options...
Brian Posted November 3, 2012 Share Posted November 3, 2012 The dual coil cartos have two 3.2ohm coils which gives you 1.5ohm total. Seems backwards, but that's the way it is. It can handle higher voltages. Link to comment Share on other sites More sharing options...
mcquinn Posted November 3, 2012 Share Posted November 3, 2012 3.2 ohms is a little more resistance than a single coil SR ,there is just more surface area at a lower temperature to make more cooler vapor.You might be better off with a single coil carto ,would be less expensive,unless you just want an excuse to buy a new PV. Link to comment Share on other sites More sharing options...
willmon22 Posted November 3, 2012 Author Share Posted November 3, 2012 Ok, I thought it just added up to 3 ohms. So I guess they actually rate the whole device to get 1.5 ohms total. Link to comment Share on other sites More sharing options...
Brian Posted November 3, 2012 Share Posted November 3, 2012 Yep - if you check the resistance with a multi-meter it will be around 1.5ohm. Link to comment Share on other sites More sharing options...
willmon22 Posted November 4, 2012 Author Share Posted November 4, 2012 I am just still confused how does 3.2 and 3.2 get 1.5? Link to comment Share on other sites More sharing options...
mcquinn Posted November 4, 2012 Share Posted November 4, 2012 (edited) http://www.allaboutcircuits.com/vol_1/chpt_5/6.html In a parallel circut Half the current flows through each element.The advantage of dual element is more surface area to vaporise more liquid in a shorter period of time.The numbers would add up better if we went to a smaller decimal place instead of rounding up. Edited November 4, 2012 by mcquinn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now