Bebop Posted January 2, 2014 Share Posted January 2, 2014 I have only experienced one juice out of all that I have tried that changed for the worse after 6 months. And it wasnt that it was horrible or foul. It just lost its initial flavor. I thhink 2 years is a bit of a stretch but 6 months to a year should be expected as long as you don't let it suffer extreme changes in temp Link to comment Share on other sites More sharing options...
dannyk Posted January 2, 2014 Share Posted January 2, 2014 Just had some Flavour Art juice turn up and it is stamped use before August 2014.That's only 8 months ? Has this been sitting on the shelf for a year ? Link to comment Share on other sites More sharing options...
Aquatroy Posted January 2, 2014 Share Posted January 2, 2014 Currently our vendors are putting a 1 year expiration date on all juices.... Link to comment Share on other sites More sharing options...
Compenstine Posted January 2, 2014 Share Posted January 2, 2014 There is a quote button but even if I press it, it just takes me to last post. I am very curious about juices becoming old and tasting like vinegar because with all of these holiday sales I have bought up a lot of juice and I did not think it could go bad. Don't worry about it According to Dow about Propylene Glycol USP/EP: "Storage & Handling PG USP/EP has a shelf life of two years when stored below 40°C (104°F) in closed containers away from sources of UV light." Have not been able to find anything on the storage life of VG but I do know it used also as a preservative and I assuming a shelf life the same as PG. Link to comment Share on other sites More sharing options...
Vispera Posted January 3, 2014 Share Posted January 3, 2014 Just ordered 3 sony vtc4 18650 7.99 at sun vapers Link to comment Share on other sites More sharing options...
spydre Posted January 4, 2014 Share Posted January 4, 2014 (edited) Okay, today was PAYDAY Bought in person: 12 ml Boba's Bounty! At a bit of an inflated price 1 drip tip o ring for the drip tip of the KPT2 that smells like Pluid 1 5 pack of Kanger coils, 2.5 ohms. A drip tip at one store. Didn't like the way it felt in my mouth, so I got another drip tip at a different store that gives more area for my lip before flaring out into the bell. New library card Groceries ONLINE: From Vapor Beast, Cool Beans for the other half, and Kick Ash tobacco for me. All the necessary OTHER o rings for KPT2 tank, as well as 2 packs of coils Um, thee more dripping attys, and two more drip tips (dropped my tank in the middle of the night, it landed on top of the drip tip, shearing it off IN the KPT and I had to pry it out this morning. EDIT: Wow, I just realized in all three of my mini pro tank originals......they are all pretty much the same darned color. I should have thought about that more before dropping the BB into a mini pro tank. Edited January 4, 2014 by spydre Link to comment Share on other sites More sharing options...
Tam Posted January 4, 2014 Share Posted January 4, 2014 Just ordered three different styles of steel pipe drip tips from Madvapes. They're around 2.5" each, which will be great for direct dripping. http://www.madvapes.com/steel-pipe-drip-tips.html?utm_campaign=Email%20Newsletter%2012%2F13&utm_source=Email&utm_medium=Email spydre 1 Link to comment Share on other sites More sharing options...
spydre Posted January 4, 2014 Share Posted January 4, 2014 Just ordered three different styles of steel pipe drip tips from Madvapes. They're around 2.5" each, which will be great for direct dripping. http://www.madvapes.com/steel-pipe-drip-tips.html?utm_campaign=Email%20Newsletter%2012%2F13&utm_source=Email&utm_medium=Email Oh, those look nice. Which three did you get? If I hadn't already purchased four drip tips, I'd be all over those, lol. Link to comment Share on other sites More sharing options...
Tam Posted January 4, 2014 Share Posted January 4, 2014 Oh, those look nice. Which three did you get? If I hadn't already purchased four drip tips, I'd be all over those, lol. B, C and E. What I'm looking for are long drip tips with smaller mouth pieces, I don't want to feel like I'm smoking a big cigar. Lol. There are super long ones, but those are a bit more than what I'm looking for -- I think. Link to comment Share on other sites More sharing options...
spydre Posted January 4, 2014 Share Posted January 4, 2014 Let me know how those turn out? If I start replacing my evods with mini KPT2s or mini Davides, I'll need different drip tips to tell them apart, and while I like the looks of the belled drip tips, if the flaring is too close to where you would put your lips - or even worse, if it's bumped out there - I don't find it comfortable. Which is why I ended up purchasing two drip tips yesterday. I should have compared the first one to the one that broke, but I didn't think it would make that much of a difference. It did. Link to comment Share on other sites More sharing options...
Mrwaylon Posted January 4, 2014 Share Posted January 4, 2014 (edited) Went to the new vape shop and picked up the following. Kayfun lite Ultra fire 18650 Battery charger Origin mech mod And just ordered three Sony 18650 30a Edited January 4, 2014 by Mrwaylon Link to comment Share on other sites More sharing options...
Mrwaylon Posted January 4, 2014 Share Posted January 4, 2014 Well it wouldn't let me put a picture in when I edited but here's my new setup Link to comment Share on other sites More sharing options...
dannyk Posted January 5, 2014 Share Posted January 5, 2014 Well it wouldn't let me put a picture in when I edited but here's my new setup Looks like a lamp post for christ sake must be a bugger to get that around Link to comment Share on other sites More sharing options...
Mrwaylon Posted January 5, 2014 Share Posted January 5, 2014 Looks like a lamp post for christ sake must be a bugger to get that around I love it lol. The weight don't really bother me with it. And the kayfun lite I love it. Link to comment Share on other sites More sharing options...
mayhemvaper Posted January 5, 2014 Share Posted January 5, 2014 Bought the new Vamo V5 from Vices Elec cigs out of Florida Only paid $57 for vamo, 2 18650 batteries, charger and shipping Vamo is a beast! Now got to get me a Iclear30B to sit on top Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 6, 2014 Share Posted January 6, 2014 Got a nitecore charger. Power converter fried my last one Link to comment Share on other sites More sharing options...
mikelove Posted January 6, 2014 Share Posted January 6, 2014 Got some 3mm ekowool and 28g kanthal Link to comment Share on other sites More sharing options...
spydre Posted January 6, 2014 Share Posted January 6, 2014 Got a nitecore charger. Power converter fried my last one Wow, how'd that happen? Link to comment Share on other sites More sharing options...
Vispera Posted January 6, 2014 Share Posted January 6, 2014 Went out and got me a magneto and a Neptune tank to match spydre 1 Link to comment Share on other sites More sharing options...
Mrwaylon Posted January 6, 2014 Share Posted January 6, 2014 i just ordered me 21 foot of silica wick 2mm... spydre 1 Link to comment Share on other sites More sharing options...
BlueOx Posted January 7, 2014 Share Posted January 7, 2014 Just ordered a KPT2, 5 extra heads for it, 28g and 30g kanthal and some 500x500 as mesh. I'm gonna try my hand at building coils for the KPT2 first and work my way up from there. I'm still on the lookout for a kayfun lite and a good starter mech mod to play with if y'all have any suggestions Link to comment Share on other sites More sharing options...
Compenstine Posted January 7, 2014 Share Posted January 7, 2014 Just ordered a KPT2, 5 extra heads for it, 28g and 30g kanthal and some 500x500 as mesh. I'm gonna try my hand at building coils for the KPT2 first and work my way up from there. I'm still on the lookout for a kayfun lite and a good starter mech mod to play with if y'all have any suggestions Is the Mesh for the KPT 2? If so that is really not the best thing to use on the KPT 2s for wicking. You need to use Silica or Cotton. As far as the Mech MOD a good starter would be a Smoktech Magneto. Link to comment Share on other sites More sharing options...
BlueOx Posted January 7, 2014 Share Posted January 7, 2014 Is the Mesh for the KPT 2? If so that is really not the best thing to use on the KPT 2s for wicking. You need to use Silica or Cotton. I the mesh is for the KPT2 but it will be used in conjunction with cotton. I watched a coil build by riptrippers on YouTube and it seemed to work well. Link to comment Share on other sites More sharing options...
Compenstine Posted January 7, 2014 Share Posted January 7, 2014 What Rip video, could you please post a link? I don't think I saw one where he used mesh and cotton for a KPT 2? Link to comment Share on other sites More sharing options...
BlueOx Posted January 7, 2014 Share Posted January 7, 2014 What Rip video, could you please post a link? I don't think I saw one where he used mesh and cotton for a KPT 2? Sure thing! I just watched it last night myself and it looked pretty interesting so I thought I'd give it a try! http://youtu.be/USkgDfHy-7A Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now