Jump to content

Ego-C Twist Question


Viper Ron

Recommended Posts

Ok gang, broke down and bought some twist batts and am I correct to understand that it's not a 3 volt select but a range from 3.2 to 4.8? Although as tiny as the writing is on these it's a bit of a challege. So let's say I'm between 3.2 and 4.0 it should be around 3.6?

Link to comment
Share on other sites

If I hold mine to a fairly bright light, angle it just so, and squint real hard... there are lines in .2 increments. There are numbers saying 4.0 and further around: 4.8. So the second line after the 3.2 should be the 3.6. :)

Link to comment
Share on other sites

Don't even try to read those numbers, it ain't worth it. You are correct V.R., 3.2 all the way left, 4.8 all the way right, 4.0 in the middle. The dial rotates almost 3/4 of a full turn so if you give it a quarter-turn (about 90 degrees) that will put you close to 3.7. A quarter turn from the high end and your at about 4.3. These to spots I tend to use alot. My very lr stuff I put it to the minimum or just up to 3.4 but never do I look at those numbers.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines