3Ohm Cartomizers For 5Volt Passthrough?

[Soberrider]

I'm sure this has been asked several times here. Do I need to find strictly 3 ohm cartomizers for a 5 volt passthrough? I have some that might be 2.5ohm and it seems like they ruin the taste.

[blucavvy]

they ruin the taste because that voltage is too high for that ohm carto.

higher voltage=higher ohm

lower voltage=lower ohm

you want something close to 3.0ohm, 2.8 would be fine but i wouldn't go much lower, you have to remember that their are variances in carto's, so even though the one's your'e using might be rated for 2.5ohm, they may actually measure out as low as 2.2ohm or as high as 2.8ohm

on my 5volt passthru i never use anything lower than 2.8ohm, anything lower and the 5v just fries the juice.

[Soberrider]

OK I'll have to order some others then. Maybe 5 volts won't really be any better than my regular eGo with a 2.0 ohm. I took peoples word on 5 volts being better but now I don't know.

[blucavvy]

you'll like the 5 volt trust me, it creates clouds of vapor, you just have to pair it to the right hardware that's all.

[Soberrider]

I'll go back to VaporKings for the Boge that are rated between 2.7-3.0 ohms.