Deadpool809 Posted February 8, 2012 Share Posted February 8, 2012 Until recently, I've been buying LR DC cartos. They worked great on my VV Mod, but I found I was always set at the lowest settings. There was nothing wrong with that, but I figured I may as well get some standard resistance cartos and try it on a higher voltage. So I ordered a whole bunch. The result wasn't great. It was decent - better on some flavors than others though. So I realized that for some flavors, I am going to want to stick to LR cartos. I can't imagine I am alone in this. When you store your cartos, how do you keep your LR's from getting mixed up with your standard resistance ones? Link to comment Share on other sites More sharing options...
blucavvy Posted February 8, 2012 Share Posted February 8, 2012 sharpie on the condom Link to comment Share on other sites More sharing options...
mega Posted February 8, 2012 Share Posted February 8, 2012 get some small zip lock bags, coin bags and write on em with a sharpie. i put those little do not eat silica packs in with mine. keeps em fresh Link to comment Share on other sites More sharing options...
Viper Ron Posted February 8, 2012 Share Posted February 8, 2012 Some people use different colored rubberbands Link to comment Share on other sites More sharing options...
DAYVAPE Posted February 8, 2012 Share Posted February 8, 2012 I dedicate one drawer of my 'vape box' to LR cartos... and another one for the standard ones. The same goes with atomizers as well. Then another slot for adapters... another for drip tips... another for mod batteries... and so on and so forth. Pretty simple really. Link to comment Share on other sites More sharing options...
blucavvy Posted February 8, 2012 Share Posted February 8, 2012 I dedicate one drawer of my 'vape box' to LR cartos... and another one for the standard ones. The same goes with atomizers as well. Then another slot for adapters... another for drip tips... another for mod batteries... and so on and so forth. Pretty simple really. i pretty much do the same, my "vape box" is an old jewelry box i got, it's from like the 60's, puke green lol i love it. Link to comment Share on other sites More sharing options...
mcquinn Posted February 9, 2012 Share Posted February 9, 2012 I just leave mine in the Boge boxes with the labels on them and just take them out as I use them.I have tape inside my box mod with either S or L so I know which one I am using and then I use them until they are ready to toss.I also keep a Joye 306 atty around for dripping when I want something different and don't want to comit a carto.I also try to get the LR in black and the standard in silver when I can. Link to comment Share on other sites More sharing options...
Deadpool809 Posted February 9, 2012 Author Share Posted February 9, 2012 I am having a hard time with the standards... I am getting no flavor out of them. Maybe I am just a LR guy! THat, or I haven't found the right flavor that hits on them. The best I have gotten out of the SRs is Butterfly Bait... but it still isn't quite as good as it is using a LR. Thanks for the tips - I think I am going to go with the sharpie method... it best fits my current storage scheme. I bought 20 of the things... I have a feeling they are going to last a very long time based on my experience so far. Unless I can find a hit. Link to comment Share on other sites More sharing options...
DAYVAPE Posted February 9, 2012 Share Posted February 9, 2012 What voltage are you using the standard ones at? Link to comment Share on other sites More sharing options...
mega Posted February 9, 2012 Share Posted February 9, 2012 isnt it higher volts like standard ohms and lower volt like lower ohms or is it the opposite. Link to comment Share on other sites More sharing options...
Deadpool809 Posted February 9, 2012 Author Share Posted February 9, 2012 Trying out different voltages on my Infinity Pro... I settle around 4.5 volts... but while the vapor level is there, it is warmer and the flavor is pretty well gone. I think you got it right mega... Link to comment Share on other sites More sharing options...
DAYVAPE Posted February 9, 2012 Share Posted February 9, 2012 Correct. There is often a fine line when trying to get the best performance out of a carto. Too high and you start burning it... too low and you don't get any flavor at all. Takes some fine tuning... and every single carto will perform differently as well. Link to comment Share on other sites More sharing options...
bobthesalesclerk Posted February 9, 2012 Share Posted February 9, 2012 Correct. There is often a fine line when trying to get the best performance out of a carto. Too high and you start burning it... too low and you don't get any flavor at all. Takes some fine tuning... and every single carto will perform differently as well. I say anything over 5 is bleh. Between 4 and 5 is where its at with cartos. I have one juice that is good over 5 but not in a carto. sent from my Ice Cream Sandwiched Gtablet Link to comment Share on other sites More sharing options...
DAYVAPE Posted February 9, 2012 Share Posted February 9, 2012 (edited) Well, it all depends on what the resistance of the carto is. If you have the higher resistance cartos then 5v would be just fine. But for the most part, with 'standard' resistance cartos, I would have to agree with you. That's the great thing about variable voltage... you can easily dial it in. Edited February 9, 2012 by DAYVAPE Link to comment Share on other sites More sharing options...
blucavvy Posted February 9, 2012 Share Posted February 9, 2012 Well, it all depends on what the resistance of the carto is. If you have the higher resistance cartos then 5v would be just fine. But for the most part, with 'standard' resistance cartos, I would have to agree with you. That's the great thing about variable voltage... you can easily dial it in. troof Link to comment Share on other sites More sharing options...
bobthesalesclerk Posted February 9, 2012 Share Posted February 9, 2012 (edited) Well, it all depends on what the resistance of the carto is. If you have the higher resistance cartos then 5v would be just fine. But for the most part, with 'standard' resistance cartos, I would have to agree with you. That's the great thing about variable voltage... you can easily dial it in. I only use 2.8-3 ohm cartos on my buzz(and soon buzz pro ). Low resistance on variable voltage is pointless IMO. I always order a few boxes of lr and a few boxes of sr and the lr only go on my 3.7 devices. The only time lr stuff should be on anything higher than 3.7 is if its dual coil which I don't consider real low resistance in the first place anyway. sent from my Ice Cream Sandwiched Samsung Fascinate Edited February 9, 2012 by bobthesalesclerk Link to comment Share on other sites More sharing options...
mega Posted February 9, 2012 Share Posted February 9, 2012 im useing 3.0-3.2 ohm ce2's right now on 3.7v. i really like it. Link to comment Share on other sites More sharing options...
blucavvy Posted February 9, 2012 Share Posted February 9, 2012 i use 1.5ohm dcc on my (under load) 3.5 volt LEO and i use 2.0ohm boge verticals on my (under load) anywhere from 3.3-3.8volt v4l 808's Link to comment Share on other sites More sharing options...
DAYVAPE Posted February 9, 2012 Share Posted February 9, 2012 I only use 2.8-3 ohm cartos on my buzz(and soon buzz pro ). Low resistance on variable voltage is pointless IMO. I always order a few boxes of lr and a few boxes of sr and the lr only go on my 3.7 devices. The only time lr stuff should be on anything higher than 3.7 is if its dual coil which I don't consider real low resistance in the first place anyway. sent from my Ice Cream Sandwiched Samsung Fascinate Right. I wasn't saying that I use LR on VV. Standard only on VV, obviously. Rock on Buzz Pro. Link to comment Share on other sites More sharing options...
mcquinn Posted February 10, 2012 Share Posted February 10, 2012 (edited) I think the liquid has more to do with the flavor than anything else.Unless you consider charred filler a flavor.☺The best liquids for me taste fine at standard resistance and voltage ,but I get bigger clouds of vapor at low resistance while going through the liquid faster.Dekang tobacco flavors do it for me. Edited February 10, 2012 by mcquinn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now