RezoTheRed Posted November 19, 2011 Share Posted November 19, 2011 (edited) Alright, the video on this site was not helpful at all, so please do not send me to it. The girl in the video is not using "ordinary parts" at all, and that is what the vape community needs. Just lost half a bottle of smoke juice trying to make this happen.. so I'm going as far as putting up this question. I have:510 Joye eGo KitJohnson Creek Smoke JuiceMost Angry Dual Coil Tank (DCT) Delrin Picture I also purchased a separate drip tip. What you are looking at is the 510 eGo Battery with the dual coil atomizer inside of the map tank. The tips I have are the standard ones that come with the eGo. How in the world do I put this together? It's really frustrating!!!! -RezoTheRed Edited November 19, 2011 by RezoTheRed Link to comment Share on other sites More sharing options...
RezoTheRed Posted November 19, 2011 Author Share Posted November 19, 2011 Btw, the drip tip that I have is not fitting the top of the map tank... so in case you thought it was easy.. it's not that easy. At the top of the dual coil atomizer is the tip that came with my 510 eGo. It is not allowing any smoke to come up.. seems very suctioned. Link to comment Share on other sites More sharing options...
Jeffb Posted November 19, 2011 Share Posted November 19, 2011 The carto should be inside the tank and it should screw into the batt directly. You will not be able to use the cone. The drip tip will be completely outside the tank. Link to comment Share on other sites More sharing options...
Uma Posted November 19, 2011 Share Posted November 19, 2011 The other tutorial is perhaps the Ce2? Here's a video where Shan uses the Dual Coil Cartomizer in the Map Tank. Video Hopefully this helps. Link to comment Share on other sites More sharing options...
mcquinn Posted November 19, 2011 Share Posted November 19, 2011 Hmm looks easy enough ,I might have to get me one of those.I am very slow to try new stuff,only been using carto's for a short while. Link to comment Share on other sites More sharing options...
bass-n-vape Posted November 20, 2011 Share Posted November 20, 2011 well first off you need to take the cartridge off the carto before you put it in the tank. the carto will be completely inside the tank and that's when you add your drip tip to the carto (cant use the cone with them). and you will also need to punch the holes at the bottom of the carto there are plenty of videos on youtube. http://www.youtube.com/watch?v=YICp6ZrO_aE Link to comment Share on other sites More sharing options...
Christopher Posted November 20, 2011 Share Posted November 20, 2011 First you must remove the tip that's already on there... 1. Remove cone 2. Screw on atomizer 3. Place tank over cartomizer (ensure no tip is on the cartomizer) 4. Fill and place drip tip on top. See this video article here, very easy to follow http://www.vaportalk.com/home/map-tank-setup-use/ RezoTheRed 1 Link to comment Share on other sites More sharing options...
RezoTheRed Posted November 20, 2011 Author Share Posted November 20, 2011 (edited) I think this is working as it should. I removed the white plastic piece within the dual coil atomizer and it started to work. Still, I'm pretty confused with the drip tip product lines. It appears the drip tip that I purchased online is for a "mega eGo" and won't fit mine (or will it?) If not, where do I get a drip tip that will actually fit? Christopher: MUCH BETTER VIDEO - It actually shows the white piece that was preventing me from being able to take a pull from it. I think this website should use it instead of the one that is currently up. Just my opinion. Thanks! Edited November 20, 2011 by RezoTheRed Link to comment Share on other sites More sharing options...
Christopher Posted November 20, 2011 Share Posted November 20, 2011 The MAP Tank uses a 510 drip tip. Link to comment Share on other sites More sharing options...
Jeffb Posted November 20, 2011 Share Posted November 20, 2011 A standard 510 drip tip will work Link to comment Share on other sites More sharing options...
cheryli Posted November 20, 2011 Share Posted November 20, 2011 First you must remove the tip that's already on there... 1. Remove cone 2. Screw on atomizer 3. Place tank over cartomizer (ensure no tip is on the cartomizer) 4. Fill and place drip tip on top. See this video article here, very easy to follow http://www.vaportalk...tank-setup-use/ Screw on atomizer? Do you mean cartomizer? I'm trying to figure this one out too...always looking at new gear. -C Link to comment Share on other sites More sharing options...
RezoTheRed Posted November 22, 2011 Author Share Posted November 22, 2011 (edited) The MAP TANK is a real piece of garbage. If you try to move it up and down at all, the seal breaks (even when you are twisting it). I've already lost about 3/4 of a smoke juice bottle.. which is about $10-$15. Pretty pissed off. Not to mention, I paid $30 for the ability to do so... and "Most Angry Industries" contact emails are all shot (sales@, etc). I'm really mad about this crap. Also, in the video, that girl says "you don't get that burnt taste." It's a lie, the burnt taste actually came within 18 hours of using it... unlike the default eGo cartomizers. Edited November 22, 2011 by RezoTheRed Link to comment Share on other sites More sharing options...
twelveday Posted January 11, 2012 Share Posted January 11, 2012 have you figured it out or did you go with another tank to try? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now