Can't Find Pre Punched Dual Coil Cartos!

[CASEACE79]

Well I jumped on the bandwagon and decided to try the DCT Map tank and it was the answer to my vaping prayers. It was exactly what I've been waiting for. Problem is that I'm having a hell of a time tracking pre punched dual coil cartos. I was thinking of punching them myself but am want to make sure I get the correct dual coils. Which ones should be used in the DCT? Any links would be stellar. Thanks for the help!

[Jeffb]

COV has them : http://www.cloudsofvapor.com/store/138-dct-map-tank/915-dct-map-tank-punched-carto-125-ohm.html

[CASEACE79]

Thanks jeff but they're out of stock. I'm on the notify me list. Can't find them in stock anywhere.

Edited October 26, 2011 by CASEACE79

[Jeffb]

Here's a vid on how to punch your own:

http://www.youtube.com/watch?v=IVPlyMGY97Y

[Christopher]

COV, Most Angry Industries and soon Vapor Talk will carry them. But there are other suppliers that also carry standard Smoke Tech Dual coild cartos. (That's the brand in case you where wondering) Use Jeff's video above and you'll be all set

[Kingbtheone]

really easy, i messed one up out of 100 so far, 2 ways- hacksaw/ dremmel tool or best way is using a medium size screw and use it with a hammer like a hole punch. easy..... i have also seen a pair of wire cutters used by cripming the carto at the bottom

[mcquinn]

I think I would just cut them with Dremel or hacksaw.My biggest concern would be getting them out of round so the o-rings don't seal.

[CASEACE79]

So it seems like I've tracked down a site that has them. They seem really cheap. Might be because I was strictly an atty guy before the DCT. I ordered some and I'll let you guys know about the supplier. BTW has anyone ever bought from this site? Here's the link. http://tinyurl.com/3m63q9q

[CASEACE79]

I think I would just cut them with Dremel or hacksaw.My biggest concern would be getting them out of round so the o-rings don't seal.

I've heard not to saw or dremmel them. Small shavings of metal can get into the fibers. Don't think I want to vape metal.

[Kingbtheone]

the one i messed up i used too big of a screw to punch it, it dented it too much to use on my liqidnator or j-tank so i used it nornal, just dented, agreed with the dremmel or hacksaw way about the shavings

[CASEACE79]

I to used too big a nail the 1st time but it wasn't bent so bad that it couldn't be used in the tank. It did however turn the carto into a straw for the juice. Ya live and ya learn.

[Saabdrifter]

Big Daddy Vapors is selling a cheap carto punching devise. Its a pluming tool so you could pick one up at your local hardware store or order one online. I found a sweet machined adjustable one online, but it is $40. I have used a Dremmel tool and just kept my cut shallow, then picked out the remaining part so no metal went into the filler. Its works OK.