Cloud Cuckoo Man Posted July 15, 2011 Share Posted July 15, 2011 I'm dying here. I have a dse901 kit and their cartomizers were terrible they lasted about a day each even after refilling them. Anyway, i just received in the mail a 901 to 808-d adapter and some 808-d cartomizers. I put it all together anndddd....nothing. There is airflow going through but no vapor. I'm pretty new to all this so any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
mcquinn Posted July 15, 2011 Share Posted July 15, 2011 Auto batteries?If so may not be enough airflow to activate the switch.Try them without the adapter ,auto batteries will allow enough air which is what the adapters allow for on manual sealed batteries. Link to comment Share on other sites More sharing options...
Cloud Cuckoo Man Posted July 15, 2011 Author Share Posted July 15, 2011 Auto batteries?If so may not be enough airflow to activate the switch.Try them without the adapter ,auto batteries will allow enough air which is what the adapters allow for on manual sealed batteries. i have one manual and one auto battery. with the adapter on they both have air going through fine but no vapor at all. and with no adapter they both dont have any airflow. and the little bit i can taste when i don't use the adapter tastes like horrible plastic Link to comment Share on other sites More sharing options...
Cloud Cuckoo Man Posted July 15, 2011 Author Share Posted July 15, 2011 oh and i guess i should add that the batteries are indeed working when i pull on them. they light up...and there is air coming through. but the cartomizer doesn't seem to be doing anything at all. Link to comment Share on other sites More sharing options...
Cloud Cuckoo Man Posted July 15, 2011 Author Share Posted July 15, 2011 so heres an interesting update. ive been playing around with these cartomizers and i lifted up the middle piece with tweezers and screwed it onto the adapter until it was touching. then i slowly screwed it on while i was hitting it and when i did that i would get vapor in one spot for like half a second...then it would stop working. screw it on a little more...a little more vapor, and then stop working again. until its all the way screwed on and nothing. Please someone...help me i am so frustrated Link to comment Share on other sites More sharing options...
Brian Posted July 15, 2011 Share Posted July 15, 2011 (edited) I thought the 901 and KR808 had the same threads. Did you try the 808's without the adapter? (never mind, I see that you did). The center pole of the adapter should be able to slide up and down a little. Try adjusting it some. You can also try to pull the center connector of the carto down some. Edited July 15, 2011 by Brian Link to comment Share on other sites More sharing options...
mcquinn Posted July 16, 2011 Share Posted July 16, 2011 I have had some 901 atties that would not make contact and I filed the bottom of the atty down to move the contact closer. Link to comment Share on other sites More sharing options...
debb Posted July 16, 2011 Share Posted July 16, 2011 I turned the little screw on the bottom of my attys when they don't fire....works well.. Link to comment Share on other sites More sharing options...
24leaves Posted July 22, 2011 Share Posted July 22, 2011 Once you go eGo-Tank You never go back! Maybe you got the wrong decision in the first time. Sorry! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now