Attty Problems

[Camarovape]

Just got a new atomizer vaped with it and it had poor vapor. I didn't really want to vape through the nasty primer either so I cleaned it with warm water etc let it sit for a day and still poor vapor and flavor. Any idea why?

[Brian]

Sounds like it may still have water in it. Did you blow out the excess water? Try blowing through it to force out any water. And sometimes it just takes a little while for a new atty to break in.

What kind of atty is it?

Edited July 4, 2011 by Brian

[Camarovape]

Sounds like it may still have water in it. Did you blow out the excess water? Try blowing through it to force out any water. And sometimes it just takes a little while for a new atty to break in.

What kind of atty is it?

I blew out the water after its been siting for a couple days since,its just a regular joy 510 atty.

[Brian]

You may try cleaning all your contact points (the connector on the battery and atty) to make sure you have a good connection.

Could be a dud (it happens), could be flooded (is it gurgling?), or it could be that you don't have enough juice in it (is the vapor kind of dry and harsh?).

[mcquinn]

Sometimes it takes a while to get one going,stick with it a while and see if it doesn't improve.

[Camarovape]

Well I blew it out again and let it it for the day, came back vaped a little still poor vapor. Tried again and now it works great. I'm guessing there is still primer to work through and maybe some water was trapped in there from the e liquid I had in there and from the primer also.