Beans Posted May 12, 2011 Share Posted May 12, 2011 First let me say I love my new VV Mod But......... Now I'm having Noob problems. What is going on? The infinity does not work with LR Cartomizers so I bought 10 boxes of Boge SR cartomizers. They all burn as soon as I use them. I've dialed down the voltage to 3.7 and it is still burning. What is going on? Let me assure you all I DO KNOW how to fill the cartos and yes they have more than enough liquid. I've even let them sit over nite and top off. They work fine on my eGo and PT but taste like burning metal on my VV. I have a few junk gold thread cartomizers laying around and low and behold they work brilliantly. What the heck am I missing here? I've never had these issues, and to add insult to injury I now have 13 packs of Boge 2.0 , 10 packs of Boge SR and 2 lousy gold thread cartos. :wallbash: Please Help! Link to comment Share on other sites More sharing options...
egoluvr Posted May 12, 2011 Share Posted May 12, 2011 aww poor thing- nobody's come along to help you yet? I wish I could help but i've only used the 2.0 silver threads Williamisneu 1 Link to comment Share on other sites More sharing options...
fran1959 Posted May 12, 2011 Share Posted May 12, 2011 Beans, so sorry you are having problems, I am afraid I cannot be much help either. I am sure someone who has a VV will be by later and hopefully answer your questions. Link to comment Share on other sites More sharing options...
CDATundra Posted May 12, 2011 Share Posted May 12, 2011 Beans, wish I could help, but you know I am just NOT a carto guy. Good luck, I hope you get it figured out soon!! Link to comment Share on other sites More sharing options...
DAYVAPE Posted May 12, 2011 Share Posted May 12, 2011 (edited) I don't know.... but here's what I think: I'm bettin' my money you could have a bad unit in your hands... it's happened plenty of times with mods/devices I'm sure. I'd check with the vendor ASAP. Edited May 12, 2011 by DAYVAPE Link to comment Share on other sites More sharing options...
Beans Posted May 12, 2011 Author Share Posted May 12, 2011 I found this on the NotCigs site: "The Infinity is NOT designed for LR attys , it has a 2 amp max current draw." I would assume that would also include LR Cartos as well?? I don't know.... I know I'm using SRCartomizers It shouldn't be dropping that low and from what I understand if it does it automatically shuts down the PV which it never has and my cartos arent popping either so they can handle the voltage..If I remember Boge SR run around 2.7 not low enough to cause difficulties with the infinity, but deffinately hot running at 5-5.5 volts. New theory could I be burning my juice or scorching something? Since I've only been as high in voltage as the eGo do I need to do something different as I vape? Let the Carto cool off, It does get hot. Link to comment Share on other sites More sharing options...
DAYVAPE Posted May 12, 2011 Share Posted May 12, 2011 (edited) I know I'm using SRCartomizers It shouldn't be dropping that low and from what I understand if it does it automatically shuts down the PV which it never has and my cartos arent popping either so they can handle the voltage..If I remember Boge SR run around 2.7 not low enough to cause difficulties with the infinity, but deffinately hot running at 5-5.5 volts. New theory could I be burning my juice or scorching something? Since I've only been as high in voltage as the eGo do I need to do something different as I vape? Let the Carto cool off, It does get hot. Honestly, I don't think you need to vape any differently than normal. As long as your voltage is dialed in for the proper resistance on the carto then all should be fine. Heck, you should be able to set it to around 4v and get the same results as you would using your eGo.... doesn't make sense really. Have you emailed Notcigs to ask them yet? Just curious... how is the draw on it vs. the eGo? Edited May 12, 2011 by DAYVAPE Link to comment Share on other sites More sharing options...
Beans Posted May 12, 2011 Author Share Posted May 12, 2011 I don't know.... but here's what I think: I'm bettin' my money you could have a bad unit in your hands... it's happened plenty of times with mods/devices I'm sure. I'd check with the vendor ASAP. You know, The unit its self seems to work just fine. The voltage seems to go up and down as it should, it hasn't had any glitches as far as I've seen. No miss fires and low grade cartomizers which I assume have higher ohms than Boge SR 2.7 work fine. It's just after a few hits with the fresh but "primed" Boge Carto starts burning my mouth and throat, just like a dry burning Atty would. You know I've only used cartos out of one box, could they be bad cartos? Link to comment Share on other sites More sharing options...
DAYVAPE Posted May 12, 2011 Share Posted May 12, 2011 You know, The unit its self seems to work just fine. The voltage seems to go up and down as it should, it hasn't had any glitches as far as I've seen. No miss fires and low grade cartomizers which I assume have higher ohms than Boge SR 2.7 work fine. It's just after a few hits with the fresh but "primed" Boge Carto starts burning my mouth and throat, just like a dry burning Atty would. You know I've only used cartos out of one box, could they be bad cartos? I would certainly try multiple cartos from several boxes to find out.... Link to comment Share on other sites More sharing options...
Beans Posted May 12, 2011 Author Share Posted May 12, 2011 The draw is fantastic, totally adjustable in how tight you make it. I like it fairly loose, it makes fruity flavors explode in my mouth It really is a fine working PV I just have to dial in the Carto issue Link to comment Share on other sites More sharing options...
Beans Posted May 12, 2011 Author Share Posted May 12, 2011 Thanks for the help DAYVAPE, I'll bust out a few new boxes and check back. Link to comment Share on other sites More sharing options...
johns Posted May 13, 2011 Share Posted May 13, 2011 Did your issue get resolved? Wish I could have been of some help. Link to comment Share on other sites More sharing options...
Beans Posted May 13, 2011 Author Share Posted May 13, 2011 Hi Johns, Yes thank you, So far so good. It seems it was bad Carto after bad Carto. I opened up a few more boxes and no problems as of yet. What a relief! I think today is going to be much nicer. Boy Yesterday was a try of patients I just couldn't get anything to go right. Thank you for your good wishes! Hope all is well with you! Link to comment Share on other sites More sharing options...
Cheriepye Posted May 23, 2011 Share Posted May 23, 2011 I had a bad carto one and it tasted like burning pine needles. Cherie Link to comment Share on other sites More sharing options...
Erika Posted May 23, 2011 Share Posted May 23, 2011 So..this was happening to me also. I figured out that part of the heating coil was really dry. I to an 18 guage needle and randomly poked it down in the filling to allow the juice to really sink in. Problem solved!. Link to comment Share on other sites More sharing options...
Buzzkill Posted May 25, 2011 Share Posted May 25, 2011 Hi Beans , I was cruising around and saw this . most likely there were some LR cartoz mixed in with your order , it sounds like you got it worked out ? Link to comment Share on other sites More sharing options...
Beans Posted May 25, 2011 Author Share Posted May 25, 2011 Well Hi buzzkill,it's nice to see you on this side of the tracks Link to comment Share on other sites More sharing options...
Buzzkill Posted May 26, 2011 Share Posted May 26, 2011 Well Hi buzzkill,it's nice to see you on this side of the tracks I get around here and there ! LOL , glad you got your problems sorted out Beans ! I will be checking in here more often . Link to comment Share on other sites More sharing options...
Tagsanstuff Posted May 26, 2011 Share Posted May 26, 2011 burning my mouth and throat That is what is happening to me when I use my eGo LR Tank type B. the juice burns my mouth and throat. I use the same juice in my regular eGo tank atty and it is fine. I am no longer going to buy the 2ml eGo lr Tank Atty's. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now