bignick163 Posted April 8, 2011 Share Posted April 8, 2011 So I'm super excited that my Janty Stick came in the mail. I took it out of the package, put in a batt, added some juice and ........ nothing. I know I had the batt in correctly because the light came on. So can someone tell what it is I'm doing wrong ? Do I just need to charge the bat or dare I ask do I have an out of the box bad atty? Link to comment Share on other sites More sharing options...
Jeffb Posted April 8, 2011 Share Posted April 8, 2011 Battery may need charging. Can you try your atty on another device? Also sometimes the button can be tricky on the Janty Stick. Try pressing it a few times. Link to comment Share on other sites More sharing options...
bignick163 Posted April 8, 2011 Author Share Posted April 8, 2011 I have the batt on charger now. I did depress the button several time and the led light do come on but no vapor. I only have the Riva 510 and a volcano, so I don't think I can test it any other way. Link to comment Share on other sites More sharing options...
Beans Posted April 8, 2011 Share Posted April 8, 2011 (edited) When the Atty and battery are attached and you press the button, can you hear the Atty heating at all? Best to check when you know battery is charged. Edited April 8, 2011 by Beans Link to comment Share on other sites More sharing options...
Christopher Posted April 8, 2011 Share Posted April 8, 2011 I would suggest charging the batteries first. The blue batteries are not charged before being sent out. Also make sure the atomizer is screwed in all the way. It goes in quite a bit. (Though don't over tighten) If that doesn't do the trick, let us know and we'll replace it Link to comment Share on other sites More sharing options...
bignick163 Posted April 9, 2011 Author Share Posted April 9, 2011 I would suggest charging the batteries first. The blue batteries are not charged before being sent out. Also make sure the atomizer is screwed in all the way. It goes in quite a bit. (Though don't over tighten) If that doesn't do the trick, let us know and we'll replace it Thank you so much for your quick response to my problem Chris. I charged the batts and all is right as rain. I assume I can use the mouth piece that came with it as a drip tip, but how many drops of juice do you guys recomend? Three drops just doesn't seem to last long at all. Link to comment Share on other sites More sharing options...
Brian Posted April 9, 2011 Share Posted April 9, 2011 I haven't used a 302 attys in a while, but seems like 3-4 drops was good. It may take more to get it primed, but once you're going, 3-4 drops should get you several hits. Link to comment Share on other sites More sharing options...
Christopher Posted April 9, 2011 Share Posted April 9, 2011 Yea 3 drops is good in a 302. Though You'll probably want to add a couple extra at first because it's a new atomizer. (5 drops probably) The Vapor should taste like flavor and not burnt metal/plastic etc Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now