Prouddad Posted January 28, 2011 Share Posted January 28, 2011 Okay this might sound weired but I tried a atomizer that when I pressed down to ignite I can see the inside of the atomizer turn red. I don't remember what atomizer I was using but it was awesome. The vapor and TH was really nice. All my other atomizers work great but the inside doesn't turn red. I saw the inside of the atomizer when I was dripping and just wanted to see what happens when I ignite it, and this one was like the inside of a toaster nice and red. Just trying to find out what make it was and where to buy them ? Link to comment Share on other sites More sharing options...
Jeffb Posted January 28, 2011 Share Posted January 28, 2011 What type of atty was it ( 510, 306 etc...) ? All of mine will do that if I hold the button down long enough to do a dry burn. Link to comment Share on other sites More sharing options...
Prouddad Posted January 28, 2011 Author Share Posted January 28, 2011 Hey whats up Jeff, I am pretty sure it was a 801.I have a Black de-bridged 510 atomizer for dripping and this one dosn't turn red but it works good. I don't get that warm vapor feeling I read people say. What att do you use and like the best is it cisco ? Link to comment Share on other sites More sharing options...
Jeffb Posted January 28, 2011 Share Posted January 28, 2011 I have not used Cisco's attys yet. I have so many back up Joye 510's I have heard great things about Cisco's LR attys though. I run my standard Joye 510's at 4.7 volts and my vapor is plenty warm. Link to comment Share on other sites More sharing options...
Prouddad Posted January 28, 2011 Author Share Posted January 28, 2011 I have not used Cisco's attys yet. I have so many back up Joye 510's I have heard great things about Cisco's LR attys though. I run my standard Joye 510's at 4.7 volts and my vapor is plenty warm. Jeff don't you supposed to use a high voltage att when your vaping at 4.7 ? I killed three att's using them on my PT, I didn't know I was not supposed to use LR att on my PT. That cost me $ to learn that. But I am getting a lot better. Link to comment Share on other sites More sharing options...
Prouddad Posted January 28, 2011 Author Share Posted January 28, 2011 Jeff where can I buy a kick *** PT ? Link to comment Share on other sites More sharing options...
Jeffb Posted January 28, 2011 Share Posted January 28, 2011 I have never used Hv attys. My 2 ohm 510's work great at 4.7. Link to comment Share on other sites More sharing options...
DAYVAPE Posted January 28, 2011 Share Posted January 28, 2011 (edited) Jeff don't you supposed to use a high voltage att when your vaping at 4.7 ? I killed three att's using them on my PT, I didn't know I was not supposed to use LR att on my PT. That cost me $ to learn that. But I am getting a lot better. High voltage atomizers are approx. 4.5 ohms resistance... and they were made for use with 6v+ mods. Standard atomizers are approximately 2.8 - 3.2 ohms resistance... and they are intended for most other vaping anywhere from 3.7 up to 5 volts. The LR version has a resistance somewhere around 1.8 - 2.0 ohms... and, as you now know, were meant for use at 3.7v. Edited January 28, 2011 by DAYVAPE Link to comment Share on other sites More sharing options...
Jeffb Posted January 28, 2011 Share Posted January 28, 2011 All my standard Joye 510 attys are at 2.2 - 2.5 ( just checked) .... and no they are not LR attys lol Link to comment Share on other sites More sharing options...
DAYVAPE Posted January 28, 2011 Share Posted January 28, 2011 (edited) All my standard Joye 510 attys are at 2.2 - 2.5 ( just checked) .... and no they are not LR attys lol My bad, I must have been recalling the "standard resistance" cartos(yeah I know, big shocker there huh?), as they are the 2.8 - 3.0 ohm ones! I did find this though: Joye 510 Atomizer: Low Resistance (approx. 1.5 - 1.7 ohms) Standard Resistance (approx. 2.2 - 2.5 ohms) High Resistance (approx. 3.1 - 3.3 ohms) Edited January 28, 2011 by DAYVAPE Link to comment Share on other sites More sharing options...
Brian Posted January 28, 2011 Share Posted January 28, 2011 I would think that if the coil is glowing it's because you don't have enough juice in it. As Jeff said, any atty will do that if it's dry. I also use Joye 510 2.2ohm atty at 4.9V. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now