pipedreamer79

Yep, that's what I'm doing with mine. Dremel makes it easy. I also tried these dual-coil shortys from SmokTech with just the 2 slots down by the bottom cap and it's working just fine. In fact, it's the best tasting carto I've used so far. It sure does drain the battery faster, though.

If I'm going to upgrade from the Lavatube, then it'll definitely be the Provari... I almost got the Provari but talked myself into the Lavatube because it was cheaper, and I was afraid that VV vaping wouldn't give me what I still felt I was missing from an analog.

So I bought the Lavatube and am mostly pleased with it... There were a couple of minor cosmetic imperfections that bothered me, and I'd like it a lot more if it had aluminum end caps instead of cheap plastic that's painted silver. It works just like I hoped it would, and after playing with variable voltage over the last few days I can never see myself confining myself to 3.7V ever again, but I think when this Lavatube craps out I'm going to pony up for the Provari.

FYI, I ordered a Lavatube and I'm very happy with it so far. The only gripes I have are strictly cosmetic--the corner of the tiny little glass voltage display was chipped off, and there's some sort of weird scuff/scratch about the size of a penny towards the top of the tube. I would have liked the end caps to be made of aluminum or steel, but hey, it's a $70 VV mod. It performs just like I hoped it would. Right now I've got a dual-coil carto from SmokTech w/ a J-Tank on it, running at 6V, cranking out massive amounts of tasty vapor. I can run a low-res carto on it at about 4.4V to achieve that somewhat harsh full-flavored analog drag that I've been missing since I started vaping.

I'm familiar with slotting low-res cartos, I've had a Vapinator for about a month now--I'm just wondering if it's any different slotting a dual-coil, since there's an extra coil that needs to be kept wet. Do you know if the Lavatube will give me an error if I try to push it too far? My biggest fear is doing something I shouldn't do and either tearing up my mod or hurting myself.

So I'm the proud owner of a Volcano Lavatube, and I just picked up a handful of the SmokTech shorty dual-coil cartos and I want to use one with my Vapinator tank... Do I need to Dremel another couple of notches about halfway between the lower notches and where the top seal on the tank is? Do I even need to put in more notches? Also, what would be a good voltage to use with these dual-coil cartos? Should I treat them as a standard-res cartos, low res, high res? I've read the Electronics 101 pinned thread at the top, but I'm hoping for some people to post their personal preferences here as to what voltage they like to use with which cartos and with which flavors... I've used low-res cartos with my eGo, but gathered that there's no need to use low-res cartos with high-voltage; what are your opinions on what is the most voltage you can use with a low-res and still get a good (and safe!) vaping experience? I've found myself to be mostly happy w/ low-res cartos at 3.7V, but am hoping I can try and push them up to the 4.5V range and get that extra bit of monster vapor production out of them that I feel like I've been missing that can simulate the analog hit that I've been searching for since I started vaping. Any suggestions are welcome, thanks in advance!

After much deliberation, I'm going to go with the LavaTube... Considering that the starter kit comes with a charger, HR atty, and a case, I can't ignore the value. If this ends up not working out well for me, then I'll give the ProVari a shot. Thanks for all of the helpful input!

I do think that if I'm going to pony up once and know I'll be satisfied with my purchase for a very long time, I wouldn't be opposed to ponying up $160 to get going, any price is worth it if it will give me that last bit that I feel I'm still missing from analogs. I've experimented a bit with the different juices, and I by far like the "renu blend" from vaporrenew.com (55%PG/38%VG/7% electrolytes/papaya leaf extract). My favorite flavors are Creme de Menthe, Menthol, and any of the coffee flavors.

Thanks for all of the suggestions, folks What are the differences between the Lavatube and, say, the iPro? I don't really want to "try out" VV vaping--after trying my friend's 5v box mod, I know that it's going to work well for me--I don't want to get something that is mostly what I want, I want something that is exactly what I want, and I won't be left thinking, "Well this is pretty nice, but I bet this (insert various other VV mod here) is even better." Also, I'm curious--is this Volcano brand the same company that makes the big pyramid-shaped vaporizers that are generally used for, well um--'other smokeables than tobacco'? If so, I was very impressed by the Volcano vaporizer I've seen before, and that would definitely be a factor in determining which mod to try out.

I rarely use actual atomizers (I'm not much on dripping), and have pretty much used cartos ever since I switched to vaping. I've never tried anything but the 510, are there advantages to using other setups (306, etc)? I've used LR cartos for a while, and also use the vapinator external tank mod (which I absolutely love!). Why have you tried to use lower voltages? Is the vapor less harsh that way (I'm not much on a big throat hit, more into clouds of vapor) or do you try lower voltages to preserve your battery life?

Okay, so I'm in the market for a VV mod (my first step up from the eGo I started out with a year ago), and after looking this thing over, I'm really interested... Has anyone by chance ever tried one of the monster attys with this thing? I have a monster atty that I've used with my eGo and wasn't impressed, but I'm betting a high-voltage mod would really make that thing crank out some vapor... For $235 (including the charger, 18650 extension and 3 batteries), I'm really hesitant to pull the trigger on something so expensive, but if this is the holy grail of PV mods and is something I won't need to replace for a very long time, then I can suck it up and deal with it.

Thanks, Beans! I have the iPro bookmarked, and will give it a long, hard look when deciding on a mod. I'm also eyeing the Megalodon from electronicstix, does anyone have any experience with it?

So I've been vaping for just about a year now, and I'm really enjoying it. Yes, there's been a couple of short relapses to analogs, but they're short-lived. I've tried to figure out what it is that makes me relapse, and I've nailed it down to one thing--the vaporizer doesn't hit like an analog. If I take a nice long 8-10 second pull it comes close to the amount of vapor I'm wanting, but I want to be able to get that much vapor from a 3 second drag. I've been using an eGo w/ low-res cartos, and that suffices for the most part. However, I want something that hits like a cigar. I know there are a variety of different mods out there, but I don't have enough disposable income to try 2-3 different things until I find what I really like. Does anyone have any suggestions as to what they think would give me what I'm looking for? From what I've been able to read, a higher voltage mod seems to be the way to go, is there a big difference between a 5v and something greater? What are VV mods handy for, and why would you want to vape at different voltages in the first place? What sorts of cartos should I use with which voltage? Dual-coil, high-res, low-res, standard-res? Help me out!

Does anyone know where to get the materials to make a tank? I can't bring myself to spend $20 on a friggin piece of plastic and 2 rubber gaskets...

Yes, whenever I turn it on after it's managed to find its way into off mode... It doesn't blink when I click it 5 times, though.