gearvitaid

Hey guys. Do you like the Battlestar Baby Kit by Smoant? If yes, then you may also wanna try the follow up to it– Charon Baby Kit. Let's dive in for more details. Smoant Charon Baby Kit is built with innovative CPR technology, which provides a high-quality glossy finish that not only looks amazing but is water-resistant and leaves no fingerprint trace. Powered by a built-in 750mAh battery and driven by the ANT Chip, it is draw-activated and has a maximum output wattage of 15W. Charges are done by way of a Type-C USB port on the bottom of the device, and there is an LED indicator light on the side to show the battery level. For safety, Charon Baby has a range of safety features, including low voltage protection, short-circuit protection, 10s over-time protection, over-heating protection. As for the pod cartridge, it is refillable via a side filling port and can hold up to 2ml of e-juice. To meet different vaping needs, the pod comes with a pre-installed 0.6ohm mesh coil and a 1.2ohm regular coil in the kit. Since these coils are replaceable, it's no need to change a new pod cartridge when they burn out. At last, the airflow is not adjustable on this device. But for its price, this might be forgiven. All in all, the Charon Baby is not too bad as a versatile device for both MTL and DTL vaping. You may also like: beli vaporesso osmall pod

In my impression, Freemax has launched loads of great vape devices. And this time, they are back with their Autopod50 pod vape kecil kit which features the world's first double vape coil system. Here are more details about it. Autopod 50 Freemax is powered by a built-in 2000mAh battery and the wattage can be set in the range of 5-50W. Charging takes only about 80 minutes via a 2A Type-C USB port while firing occurs within 15ms. Navigating and changing settings is also quite easy thanks to an easy and multifunctional display screen and two adjustment buttons. On the screen's menu, you will see the total number of puffs taken, puff time, current wattage, atomizer resistance, current-voltage, and a battery bar. In addition to setting the power output, there are two sub-menus in which you may change your preference for timeout and reset the puffs. Each Autopod50 pod can hold 4mL of e-juice and is refilled via a bottom juice port. Moreover, it features a brand new coil system: Coiltech 4 which is outfitted with tea fiber cotton and military-grade mesh heating elements to provide the best possible vapor production. And, thorough testing proves that these mesh coils will last up to 30 or 40 refills before a replacement is needed, thus saving you a bundle. There are 2 different coil options to choose from: the AX2 0.5ohm Mesh coil (15 to 35W) or the AX2 0.25ohm Mesh Coil (30 to 50W), both of which are included in the kit. You may also like: harga xtra pod

Hey guys. Have you ever used the Caliburn Kit by Uwell? This time let's look at their Caliburn G which is a follow up to the original Caliburn. It will be available in the gearvita.id murah vape shop soon, don't miss out if you like. Uwell Caliburn G Kit is the upgraded version of the much-admired Caliburn. Powered by a 690mAh built-in battery, with a 15W max output, the Caliburn G keeps to the same pocket-friendly, stylish form factor as its predecessor. A removable coil design as well as a dual airflow system allows users to configure vaping styles in an eco-friendly manner. Equipped with a lightweight design, the Caliburn G can fit easily into pockets with a discreet yet durable design. Clicking the firing button 5 times will lock and unlock the device for a secure process. By simply inserting the pod into the device in different positions, users can alter the inhale with a restricted DTL vape and an MTL inhale possible. The 2ml Caliburn G pods keep the same simplicity as the device, with a practical top-fill method providing ease of use whilst also greatly reducing the chance of leakage. Installing and replacing coils is equally as easy, with a 0.8ohm mesh coil and a standard 1.0ohm coil to choose from. We recommend pairing both of these coils with high PG e-liquids of 50% and above for best performance. You may also like: beli smok x pozz

RELX is famous for their vape disposable devices with amazing flavors and extreme quality. This time let's look at their Nano 2, you may give it a shot if you like. RELX Nano 2 has been rigorously tested for flavor and quality of vapor and has been improved from the first NANO device that came out. All RELX Nano 2 are pre-filled with 1.35ml salt nicotine e-liquid and come with the best selling award-winning RELX flavors. The nicotine strengths of the e-liquid are either 30 or 50 depending upon the flavor that you choose, this can cater to the needs of most vapers. Powered by a built-in 280mAh battery, the RELX Nano 2 allows approximately 300 puffs, not very bad for devices with such a battery capacity. The best feature of the RELX Nano 2 is the ease of use. You do not need to charge it or fill any e-juice and can throw it when finished, so it is always ready to be used once opened. Helps all those people who move around or traveling and do not have to worry about any e-liquids or charging ports, just carry some with you whenever you need it. All in all, the RELX Nano 2 is an ideal choice if you are looking for a portable and easy to use pod system device for vaping on the go! You may also like: harga aegis pod system

Hey guys. This time let's look at the iStick Kiya Kit by Eleaf, it is an ideal device for MTL or RDL vaping. Here we go! Eleaf iStick Kiya Kit consists of the iStick Kiya Mod and the GS Juni Tank. Designed to be ultra-portable, the mod measures 35.5mm x 25.8mm x 57.2mm and looks modern with round corners and beautiful lines. However, the miniature size limits the output to 50W, but the minimum resistance capability is very low at 0.05ohm, so you will be able to use pretty much any low wattage atomizer in the marketplace today. Powering the iStick Kiya is a 1600mAh internal battery that will allow for long vaping times. The cell is recharged by plugging the unit into any wall outlet with a USB cable. The charging process concludes very fast since the system utilizes a 2A current and a temperature protection system ensures it's safe. The USB port is also used to update the mod in case Eleaf releases new firmware. With available modes that include power, temperature control (Ni, Ti, SS, TCR), and bypass, this mod is quite versatile. On the front of the mod, there's a newly designed 1.45" color display that shows vape data in an organized way and is bright. The menu includes indicators such as current resistance, current time, power, amperage, a battery bar, and more. The GS Juni Tank is a tiny little 20mm atomizer with a bottom adjustable airflow. Now, lack of grip on the airflow ring means I find myself having to literally unscrew the atty from the mod when I want to adjust my airflow. When fully open, 2 x 5mm slots provide a good restricted lung hit, along with the needlepoint DL airflow holes, which can be closed off until just one of three is visible, providing one of the nicest restricted MTL hits you could possibly ask for. The Juni has a 2ml capacity, with ELeaf branding on the glass, a thin SS top cap with a removable drip tip that's the right thickness for either an MTL or a restricted lung hit. You may also like: beli smok alike pod kit

Hey guys. This time I'm gonna introduce the Argus GT Mod by VOOPOO. It might be a good alternative if you are looking for a durable and powerful vape mod, let's dive in for more details. VOOPOO Argus GT Mod is lightweight and has a more ergonomic shape that makes it feels great in the hand. It comes with an outliner frame and leather or fabric wrapped backing which feels and looks great. The fire button is a basic rectangle with an indentation, and it is placed at the front of the mod above the screen. Below the screen are the up and down buttons and on the side behind a rubber plug is the USB-C port. It features a large color screen that's easy to see and clear and very bright. Much nicer than the ones we have seen on the Drag line lately. I didn't see a size listed, but it's likely a 0.96-inch screen. The Argus GT Mod has some toned-down options from older VOOPOO mods. You have RBA Mode (blue/R) which is your basic watt mode with no preheat options. Then there is Smart Mode (yellow/S), which is watt mode where it auto sets the wattage based on resistance and won't let you put it too high, and Temp Control mode for Ni200, Ti, SS. There's no TCR mode, but you can adjust the TCR in the preset modes. Also no preheat options, volt mode, or power curves like they had in the past. Odd that they would take those out, but not a big deal to me. You may also like: harga harga vaporesso target pm80

Hey guys. Have you ever used the Marvel 30W Kit by Hotcig? This time let's check out their Marvel 40 Mod Pod Kit which is the followup to its predecessor. Don't miss out on it if you'd like to try it out. Hotcig Marvel 40 Kit has dimensions of 91mm x 39mm x 20mm and is available in 7 different colors, all of which have space or psychedelic-style patterns. For durability, the lightweight chassis is made from zinc alloy and each pod from food-grade PC to ensure healthy vaping. And, the Marvel 40 works with a 1200mAh battery that permits 40 watts of power in either variable wattage, bypass, or custom DIY mode. Moreover, the Marvel 40 pods hold 2mL of e-liquid, which is actually very little compared to competing devices in the vape marketplace. Inside each pod, there's a 0.4ohm mesh coil that is compatible with high nicotine and standard e-liquids. The Hotcig Marvel 40 pod kit is also configured with adjustable airflow control on each coil, so you are definitely going to achieve the vaping-style you enjoy. You may also like: beli ohm aio

In this article, we'll be covering the Blotto Mini RTA by DOVPO. I think it will be a good choice if you are looking for a reliable RTA vape for more DIY fun. Ok, let's dive down. DOVPO Blotto Mini RTA is a smaller version of the original Blotto RTA. Firstly, this tank atomizer has an overall diameter of 23.4mm. As expected, it is primarily constructed out of stainless steel material and features the signature Vaping Bogan logo you saw on the original. When it comes to e-liquid, it has a maximum capacity of 2ml or 4ml with bubble glass. Both tank sections are included plus an additional PCTG tank, providing a "frosted" look. Filling it can be done quickly as it does fill from the top. What's great is that the Blotto Mini RTA Tank does feature the same knurling, so taking the tank apart, and filling is super easy. Just like the original, this one does have a unique build deck. What's great about it is that you can use both single coil or dual coil builds. This gives you plenty of options to try out. With its overall design, installing coils are a breeze too! It does feature the same 242-degree airflow system, providing you with an incredibly smooth draw. You'll get plenty of flavors too as the air travels from the bottom, and hits the coil directly. Lastly, you can fully adjust the airflow by simply twisting the base of the tank. If you were a fan of the original or looking for a new, slightly smaller rebuildable tank, the Blotto Mini RTA is one to check out. With its amazing airflow and deck design, it's a winner. You may also like: harga cartridge rpm 80

Hey guys. Pod mod kits are currently very popular in the market. This time we'll be covering the Captain 1500 Kit by IJOY, you may try it if you like. Here we go! IJOY Captain 1500 Kit has a modern and elegant appearance that combines metallic-feeling plastic with a leather grip to maximize ergonomics. Technically, the IJOY Captain 1500 Kit utilizes an internal 1500mAh battery which permits up to 40W of output for endless vaping without a recharge. Several safety protections include overtime, overcharge, high temperature, output over-current, short circuit, low battery, and max power protections. On the control face, there is an exclusive full-color display screen with a vertical menu that is convenient. With purchase, there is a 5mL cartridge included that has an effortless side-fill system and is transparent so you may see if it is time for a refill. The two coils you will get to start vaping the IJOY Captain 1500 are a C150.3ohm mesh coil that is pre-installed and ideal for sub-ohm vaping. Or, utilize the C15D 0.7ohm coil that is a great head to use with nicotine salts, but perhaps not over 10mG strength. An IJOY RBA head for the Captain 1500 is also set to be released, but that you must buy separately. You may also like: beli spesifikasi voopoo navi

In this article, we'll be covering the Gemm 25W Kit by Freemax. If you're looking for a unique pod mod kit that offers multiple vaping experiences, then you'll definitely want to check it out. Freemax Gemm 25W Kit looks fairly similar to the original Freemax Gemm 80W Kit but differs quite a bit. Like the original, it looks just like a vape pen. However, this new kit shares more similarities to a pod vape. Included, you'll get both the Freemax Gemm Pod Mod and two pods or tank cartridges. Let's cover the device first. It packs a large 1,300mAh built-in battery, and charges via micro USB. Additionally, it has a maximum wattage output of 25w. You're able to adjust the wattage too, between three different power levels. Simply click on the fire button three times and it'll switch. There are two LED light indicators on the pod mod, one for the battery and the other to show you the power output mode. As mentioned earlier, there are two pod cartridges included, and each will provide a different vape. Firstly, you'll get the 0.5ohm pod, which is designed for DTL or direct to lung vaping. Secondly, there's the 1.0ohm cartridge, which can be used for mouth to lung vaping. Airflow is adjustable as well on these pods, which is always a good feature to have. Each pod does have a 2ml e-liquid capacity, and rated to be filled between 10 or 20 times! That's a ton of usage from each Freemax Gemm pod cartridge. Lastly, the coils inside of the cartridges are SS904L mesh, and wicked with tea fiber cotton, ensuring maximum flavor. You may also like: harga harga vinci x

In this article, we'll be covering the GTX Tank 18 by Vaporesso. You may like it if you are looking for a reliable atomizer for MTL or RDL vaping, let's learn more about it. Vaporesso GTX Tank 18 is quite small, and surprisingly it's able to hold 2ml or 3ml of e-liquid. It'll hold that maximum amount with the pre-installed bubble glass tank section. If you don't like this look, you can always opt for the straight glass. For me, I'd stick with the bubble tank and the extra 1ml of vape juice. Inside the box, you'll get two coils in total. One, which is pre-installed, is the 0.8ohm mesh. The other is a 1.2ohm mesh. The filling is quite easy, as the top cap comes off completely. There's plenty of room for any type of bottle you might be using. Adjusting the bottom airflow is simple as well. It stops when either fully opened or fully closed, making it even easier to take apart. The coil replacement is a breeze too as it uses a plug-and-play coil system. We've seen this in many sub ohm tanks, so we're glad Vaporesso went this route. The included delrin drip tip is comfortable, and best suited for mouth to lung vaping with its narrow bore. It doesn't get hot while vaping either - an added bonus. You may also like: beli smok novo 2 kit

Hey guys. This time we'll be covering the GEN Mod by Vaporesso. You may like it if you are looking for a decent box mod, let's learn more about details. Mod GEN makes high power devices more accessible to users than ever before. Featuring a unique casing which includes 4 layers of coating, it will bring you a soft rubber-like hand feeling, yet still smooth to touch. Moreover, the final coating makes it scratch-proof and flame retardant. Powered by dual 18650 batteries, the mod integrates the advanced AXON chipset which enables it to fire from 5 to 220W and support the pulse mode and power ECO mode. Under the pulse mode, the AXON chipset will continuously give you a hit throughout your puffs (every 0.02s), offer you denser and more flavorful clouds with every puff. While in the power ECO mode, it can optimize your device's settings to give you that extra vaping time you need. At last, the mod is equipped with a 0.91" OLED screen, with it you can see essential vaping data clearly. You may also like: harga lost vape orion q ultra

Hey guys. This time we'll be covering the Artemis RTA by Cthulhu. It sports an easy-to-use build deck, a dome-shaped chimney for extra flavor and you have a ton of options with the airflow. To jual vape, you can check gearvita.id online store. Let's learn more about the details. Cthulhu Artemis MTL RTA is made from stainless steel material and sports an overall diameter of 22mm. With its compact size and low wattage design, it'll pair well with those single battery side by side devices like the Aspire Mixx. The Artemis does have a maximum e-juice capacity of 2.4ml and features a simple top fill design. While it's not the most capacity, you definitely won't be plowing through vape juice. There's a wide dome-shaped chimney on the inside, providing you with excellent flavor. Now when it comes to building on this deck, it's fairly easy. The Artemis does feature a two post single coil build deck. This deck is perfect for your smaller exotic coil builds or regular round wire. Furthermore, this RTA has an adjustable bottom airflow system. The AFC ring has 5 different holes you can swap between and adjust it, just twist it clockwise. Also, there are 4 different airflow pins you can attach to the 510 connection pin, allowing you to further customize the draw. Lastly, the Cthulhu Artemis RTA comes with a long MTL drip tip, but you can use your own personal 510 drip tips too. You may also like: beli r80 wismec

Hey guys. This time I'm gonna introduce the BP80 Kit by Aspire. If you are looking for a decent pod mod device, then you shouldn't miss out on it. Made from zinc alloy and a soft leather grip, Aspire BP80 Kit is both sleek and rugged. The design incorporates mechanical engineering with a retro appearance for a strong visual impact that is sure to turn heads. And, the materials ensure that the pod kit is both ergonomic and comfortable to hold. The Aspire BP80 features a brand new smart chipset which permits easily switching between auto mode and manual mode, all via a full-color display screen and adjustment buttons. With this chipboard, the BP80 can detect the coil type to give smart wattage suggestions with up to 80W of consistent power. And, the BP80 has smart wattage suggestion technology, maximum wattage protection, and intelligent power memory storage that remembers your last setting. But, if you are more hands-on, you can make adjustments in the range of 1 to 80W which works well if you are using RBA settings. Finally, the chipset comes with overall protection against overtime vaping, short circuits, overheating, low voltage, overcharging, and over-discharging. On the control face, there's a crystal clear display screen with all the vape data concisely displayed for viewing at any angle. The user interface shows vape data in full color and you may customize the screen's brightness or set the color theme to 6 different colors. On the menu, you can see vape data such as current battery percentage, the current mode, the current voltage, the current atomizer resistance, number of puffs, and last puff time. The Aspire BP80 features a built-in 2500mAh battery for all day long vaping, without a recharge. But, if your battery is drained, there's a Type-C charging port on the control face that is reversible to easily plugin and it operates with a 2A current. This means recharging is easy and lightning fast, plus you won't need an external charger or external battery. The BP80 pods can store 4.6mL of vape juice to extend vape times, but refills are also quite effortless. Moreover, the coils inside each cartridge are replaceable and are said to result in an unrivaled flavor experience. You see, the BP80 comes equipped with either a 0.17ohm mesh coil or a 0.6ohm double shot coil, both of which produce intense flavor, similar to an RDA atomizer. These durable heads have been thoroughly tested and produce the original taste of the e-liquid inside the pod. Best of all, the BP80 is also compatible with BP60 coils and even an RBA setup if you use a 510 adapter. You may also like: harga voopoo vinci 40w pod kit

Hey guys. This time let's look at the Moti X which is a decent pod mod kit. You may get it from the gearvita.id online store later if you like, here we go! Moti X is an AI smart pod mod kit with many innovative technologies. It is the first e-cigarette product to win the DNA Paris Design Award, and it is also the first vape product with ultraviolet disinfection function. Moti X is equipped with a built-in 1600mAh battery and uses a Type-C charging port for fast charging, which makes the battery durable. Moti X Kit also features innovative wattage auto adjustment and equipped with a UV disinfection cap, which will effectively sanitize the drip tip and help eliminate the risks of drip tip transmission of COVID-19. Moti X Pod has a 5.1ml e-liquid capacity, adopts an upgraded structure to reduce liquid leakage, and is internally compatible with Xeno Coil for excellent taste. This specially designed shape prevents the oil from contacting your mouth directly. In addition, the drip tip of Moti X is designed to be more ergonomic, allowing you to hold the device at different angles to adapt to different e-cigarette habits. You may also like: beli exceed grip kit

Hey guys. Here comes the good news that VEIIK released its new product – Dynam Pod Vape Kit, which is the new generation of open-pod-system (OPS). It features an elegant design, portable size, built-in 1100mAh battery capacity, standard Micro-USB quick charging, embedded magnetic suction structure, innovative U-shape vaping technology, and so on. Now let's learn more detailed information about it. VEIIK Dynam Kit is an exquisite, portable, and easy-to-use pod system. The device is made from durable zinc alloy and it comes with five fantastic colors: Tiffany Blue, Gobi Green, Gunmetal, Black, and Rainbow. It has a 1100mAh built-in battery and it can reach up to the max output of 15W. With the LED indicator light, it will be very convenient to know the battery status. And the embedded magnetic suction structure connects the pod and device tightly. The Dynam pod cartridge can hold 2ml of your favorite e-juice and it features the bottom filling system, so you can just open the silicone plug and refill the cartridge directly. Utilizing innovative U-Shape vaping airflow technology and ALPHA Cotton Coil, it will give you an amazing vaping experience and original taste of nicotine and nic-salt e-juice flavor. What's more, driven by the advanced M2 microchip, the Dynam Kit provides auto temperature control and power-saving function. You may also like: harga smok nord 2 40w

Hey guys. Do you like vape products by Joyetech? This time they are back with the latest Tralus Kit, now let's take a close at it. Joyetech Tralus Kit is made from zinc alloy and PA, making it durable and resistant to wear and tear. And, this setup is affordable due to dimensions that come in at only 31.3mm by 20.3mm by 94.7mm. For power, the Joyetech Tralus is built with an 800mAh cell that allows for 20 watts of power and is adjustable by way of a small display screen at the bottom. In addition to engaging the Tralus, the fire button is used to change wattage from 5 watts going all the way to 20 watts. Best of all, recharges are a breeze with a type-C fast-charging port in the included cable. The pods attach to the Tralus by way of strong magnets and hold 2mL of e-liquid and a bottom fill system. Moreover, the Tralus pods work with EZ series coils that are compatible with both regular and nic salt or high nic vape juices. With purchase, you will receive the 0.6ohm EZ coils for DTL vaping and an EZ MTL coil for higher nicotine liquids. The Tralus' smart detection system will also read the resistance of the installed coil and match it with the best setting. In this way, you'll never get burnt puffs while increasing the longevity of your coils. You may also like: beli smok fetch pro 80w

Hey guys. Have you ever used the Wasp RDAs by Oumier? This time I'm gonna introduce their Wasp Nano S RDA which is the latest addition to the growing Wasp line. Here we go! Available in black, gold, stainless steel, and blue, the Oumier Wasp Nano S RDA shares the same minimalist design as its predecessor – the Wasp Nano. This makes the appearance finely crafted due to high-quality stainless steel and it is also only half the height of an ordinary RDA, making it tiny. While the previous RDA only had a deck that was compatible with single coil configurations, the new Wasp Nano S RDA works with dual coil builds. Moreover, the deck's design is simple thanks to raised posts that permit easy trimming of the cotton and coils. Airflow to the deck consists of two big external air holes on the chuff cap that direct air upward to your build with a huge range of adjustment possibilities. This means you may close it all the way for an MTL experience or set it to wide open DTL airflow. Finally, the spacious juice well underneath the Wasp Nano S RDA's deck can hold 5mL of e-juice for leakproof, convenient dripping. You may also like: harga smok rpm 80 pro

Hey guys. Have you ever used the Cube line of vape mod kits by OBS? This time I'm gonna introduce the latest Cube-S Kit, here we go! With quality leather overlays, the OBS Cube-S Kit is soft and comfortable in the hand, and the material also resists perspiration and scratches. For ease of use, there's a crystal clear display screen on the control face that has a full-color UI and is easy to navigate with the power button and adjustment buttons. The leather grip on the Cube-S easily comes off to reveal the battery bay that holds a 18650 battery. With 80W of adjustable power, customizable from 5W, the cell recharges via a Type-C USB port that is easily plugged in because it is reversible. Best of all, charging completes within 1.5 hours, so you can get back to vaping very fast. And, multiple protections on the advanced chipset ensure the safest possible vape experience. If you decide on the Cube-S Kit, you will also get the Cube Tank that is easily refilled and utilizes a mesh coil, two of which are found in the package. The 0.2ohm Mesh Coil works in the range of 50-80W but is most efficient between 65 and 75W. Adding e-liquid to the 4mL tank is quite effortless: unscrew the top cap to expose two filling slots that will fit the tip of any of your favorite juice bottles. There's also a 2mL tube section included if you want a more portable setup, or if you are located in the EU where the reservoir's capacity is limited to 2mL. And, two adjustable intake slots at the bottom ensure you get the best airflow experience form the Cube-S Kit. You may also like: beli vaporesso xtra pod

Hey guys. Are you looking for pod mod terbaru 2020? Why not take a look at the Thelema Kit by Lost Vape? It is exactly what you want, now let's crack on for more details. With an integrated 23600 battery which has a 3000mAh capacity, you should be able to enjoy all-day vaping with the Lost Vape Thelema Kit, even at the maximum 80W of power. In this way, you may achieve the boundaries of both the power from the battery and the best flavor from the mesh coils. Moreover, recharging takes place via a fast Type-C USB interface that is reversible and will top off the battery in less than 60mins thanks to a 2A fast charging current. If you are a fan of Lost Vape devices, you may recognize the display on the Thelema Kit as it looks to be identical to the previous Gemini Hybrid setup. For easy viewing and effortless adjustments, the screen displays vape data vertically and in full-color. Moreover, you may customize the theme to the following colors: blue, yellow, white, red, green, and purple. According to the manufacturer, changing the theme takes less than two seconds, and changing the power is done via two adjustment buttons underneath, starting at 5W and topping out at 80. Each Thelema pod features an easy top filling system to ensure that adding vape juice to the huge 4mL reservoir is easy. For the best vapor output, you'll receive two mesh coils with purchase. The first is the Ultra Boost M4 Coil with a 0.2ohm mesh heating element that fires from 40-60W. Or, you may prefer the included 0.3ohm M1 coil that is rated 30-40W and uses Clapton wire. Both of these are designed for DTL vaping and there are four more compatible coils including an RBA head. A final thing to notice about these coils is that there is an adjustable airflow control knob on the bottom to achieve your favorite setting. You may also like: harga aegis pod 800mah

Hey guys. Have you ever used the Aegis Boost Kit by Geekvape? This time let's look at its Luxury Edition, here we go! Constructed of Zinc Alloy & Leather & Silicone, the Geekvape Aegis Boost Luxury Edition Kit is the lightest and toughest pod mod. As the special version of the Aegis Boost Kit, it perfectly inherits all the characteristics of its predecessor. Powered by a 1500mAh built-in battery and built with the AS chip, it can fire from 5 to 40 watts and supports the usage of both pod and RDTA (Boost RBA Pod sold separately). Besides, the device is IP67 rated made to be corrosion-resistant and tear-resistant and a 0.42 inch OLED screen will show the vaping data clearly. Aegis Boost cartridge comes with a 3.7ml capacity with top filling design. Also, included in the package are 2 separate coils (0.6ohm/0.4ohm) and tips (kit set only) specifically designed for MTL & DL vaping experience. You may also like: beli smok x pozz

Most people who have been vaping for more than 5 years will have probably owned one of the Eleaf "Pico" mods – the original Pico 75, Pico Baby, Pico 21700, or Pico 25 to name a few! My first ever "box mod" was a Pico Mega – which my friend still uses daily! This time we'll be covering the latest Pico Compaq Kit, here we go. Eleaf Pico Compaq Kit is a new version of the popular "Pico" mod… At first glance this looks like a typical Pico mod – however, it has been designed as a pod mod… Instead of the box mod and tank combo you usually get – this time a removable pod is inserted into the actual body of the device. It is powered by a single 18650 battery that lives inside the mod underneath the square shape battery cap! The wattage is variable and you can choose from 1-60W. An OLED screen is located on the side but the size is sadly not stated. If necessary you can recharge the battery using the USB Type C port at up to 2A charging rate. The pod is refillable via the side fill port and will hold up to 3.8ml in standard configuration but this is reduced to 2ml for TPD regulated areas. A new coil has been created for this kit called the "GTL" range and so far there is only a 0.4ohm Mesh version to choose from. Luckily you get 2 of these in the kit. A handy little cover cap is attached by a chain to the mod to keep your mouthpiece super sparkly. All in all, the Pico Compaq is definitely worth a shot! You may also like: harga smok alike kit

Hey guys. A new week has come! This time I'm gonna introduce the V.SUIT Kit by VOOPOO, don't miss out on it if you are looking for a decent pod vape device. Here are more details about it. Made of plastic with a skin-like matte coating design, the VOOPOO V.SUIT Kit is a unique pod system device. Its appearance is similar to a pen kit while the functions reach a rich level of pod system devices. Powered by a built-in 1200mAh battery, it features Smart GENE chip with 5-40W adjustable power. Charging is done by way of a Type-C USB port. VOOPOO V.SUIT can show the vaping data clearly by 0.54 inch OLED screen. The V.SUIT cartridge is made of PCTG. It maintains 2ml capacity with bottom filling design and two upgraded PnP coils: 1.2ohm PnP-TR1, 0.8ohm PnP-TM2. Moreover, the pod is compatible with VOOPOO's unique PnP platform pods, such as PnP Pod and PnP coils: PnP-VM1, PnP-VM4, PnP-VM3, PnP-R1, PnP-R2, PnP-TM1. All in all, the V.SUIT will lead to a new level of touch and flavor experience. You may also like: beli vaporesso pm80

Hey guys. This time let's look at the V.THRU Pro Kit by VOOPOO, don't miss out on it if you are looking for a reliable pod vape device. Here we go! VOOPOO V.THRU Pro Kit is constructed of Aluminum alloy + PCTG and comes with compact finger size. Powered by a 900mAh built-in battery, it can fire from 5-25W and is activated by buttonless air induction. The GENE chip inside can provide a constant output voltage to ensure consistent atomization of nicotine salt, giving you a perfect flavor experience. Charging is done via a 5V/1A Type-C USB port, one charge, enjoy two days. The 0.69' OLED screen shows parameters such as power and power in real-time, records puff totals, and the duration of each puff. VOOPOO are trying to protect children in every detail. It is highly recommended that you use LOCK mode, which can be very effective to prevent children from accidentally starting. As for the pods included in the kit, they are available in two versions. Both can store up to 3ml of e-liquid and are filled via a side filling port. The coils inside them are different, this means you can switch between 0.7ohm and 1.2ohm for the fullest resolution and flavor. Moreover, these pods adopt 360°full range of fitting lip comfort and independent and one-way condensate space, 75% more leak-proof than other pods. All in all, the VOOPOO V.THRU Pro's mission is to to be the next generation of flavorful, easy to use, low-cost starter suit. You may also like: harga ohm aio

Hey guys. Do you like the vape devices by Smoant? This time we'll be covering their Pasito 2 Kit, made from zinc alloy and leather, it looks quite luxurious. Here we go! What sets the Smoant Pasito 2 Kit apart from other pod kits is that it really features a box mod working with both pods and atomizers with the included 510 adapter. It can generate 80W of power from its 2500mAh integrated battery and can do so in a ton of modes. You see, the Pasito II can be set to variable wattage mode, curve mode, bypass mode, temperature control with nickel/titanium/stainless steel heating elements, and TCR mode. Recharging the battery is very easy thanks to a Type-C USB on the control face that works with a 2A current, so it won't take long at all to finish the charging process. Another difference between the Pasito 2 and other pod kits is the full-color TFT screen that has an exquisite vertically oriented user interface. Multiple safety features also include overtime, short circuit, overheat, and low voltage protection. For a pod system, the e-liquid capacity is usually quite low, but the Pasito 2 can hold 6mL of e-liquid. Plus, it is quite easy to refill the pods via a side refill slot. In combination with top airflow, this means that everything is quite leakproof. Moreover, the previously mentioned 510 adapter permits attachment of other atomizers, making this one of the most versatile vape systems ever. With up to 7 different coil options, including RBA coils, the Pasito II will also meet your needs as far as the exact vape experience you enjoy. Pre-installed inside the included pod is the K-1 Mesh Coil with 0.3ohm resistance and a 35-50W range. Or, you may install the included K-3 half-DTL mesh coil that is best fired from 20-25W. Not included is the K-RBA head that is best with coils from 0.3ohm, but you can purchase this item separately. Best of all, the Smoant Pasito 2 is compatible with all previous Pasito coils as well. You may also like: beli cartridge rpm 80