
ant88
VT Member-
Posts
33 -
Joined
-
Last visited
Everything posted by ant88
-
Hello yes there is 2 fully charged batteries in there
-
Hello my mod has stopped firing. Well it fires for around 5 goes then it just stops working for a good 5 minutes. It also turns itself off. And when it's off it takes me a good 2 minutes to turn it back on. I've changed the coils and that is not the problem I've connected the tank upto my old mod and it works perfectly. Does this mean I need to head to the local vape store and buy a new mod ?
-
I need 3mg NIC for the first time I have mixed my own nic into my juice I applied 2x 10ml 18mg bottles into my 80ml juice but it's so strong and I don't know why. I put it in my combat leg pocket shorts and walker around work all day shaking it but it's still to strong for me ? Ive even applied 1 18mg juice to a different bottle and it's still to strong ?
-
Am I correct in saying lower the coil ohm the higher wattage I can use for volts ? The past few weeks I have used a 0.45ohm coil and at 70w I hit 4.2 volts Now I'm using a 0.36 ohm coil giving me 80w at 3.8 volts So I'm asking if I go for 0.8 ohm coil and below can I longer my battery life but would it still give me a sweet taste. As my preference is 100w but my batterys is not lasting 3 hours on 0.45ohm and 0.36 ohm
-
The answer is amazing I'm slowly working it out and I don't even know the device I use hahha
-
Does it not matter how many volts I use then ? As 80 to 90 watt us 4.58 to 4.85
-
How far can I put the volts up on this it's to low it's not giving me a good enough hit I want to be safe then sorry im using 2x 18650 batteries if help
-
I use 2 18650 batteries why is my watt so low it's not giving me nothing and I've been told not to go above 4.5v as it's unsafe
-
Bebo your a massive help to me I didn't know none of this my v was at 1.88 so I turned it to 3.7v my watt went to 85.4 so I left it there ohm at 0.16 will try a different coil that I brought as I'm not liking my own builds
-
-
I had this problem with the same vape I just got a new coil and it worked
-
What ohm should I use for 150 watt or upto 220w I've done some searching and what I currently watt at is not recommended for the ohm I have at 0.14 im going to buy a pack of 0.85 0.50 0.45 and 0.36 what should I use ?
-
It was the centre pin thank you
-
-
What is a 510 conmection ?
-
I'm defintly Bron TC mode tc mode and yes it fires as low at 5 watt I'm not having the problem as much now it just happens from time to time
-
How do I know of it is my ohm is 19 running at 80w
-
Yes it is a rda and it works fine on my old mod but new tank having short circuit I brought the new one as it's better for ohm I was told
-
I brought a brand new predator 228 220w mod today I connected my dead rabbit tank and I have a short circuit problem how do I fix this ? I have cleaned my mod for the past hour I have changed my coil with the pre build I got from eBay still the same problem Any help or advice as when I connect my tank back up to my old tank there is no short circuit. I'm thinking something to do with the screw at bottom of the tank ? As the hole is deeper for the connection on my mod for the screw on my tank then my old mod. But I'm not sure if it's ok to turn the screw at bottom of tank. Thank you
-
So more loops means more ohm what so you consider a good ohm and how many loops is that ?
-
This is why I've just wasted a packet of wire thank you for your help
-
I use to have the same problem. My fix was I went down to the cheapest crappiest electronic cigarette I could get them cheap pens from there I moved to the smok pen and onto mods I worked my way up. For me it was getting use to the difference from ciggerette smoke to vape smoke as there is so much more smoke in vaping
-
My last problem is even when my coil was built by the man at the shop. Everytime I take deep inhales it tastes burn even with a brand new coil and cotton but small inhales i there is no burnt tastes mine is a mouth to throat. Would you also have any suggestions on how to cut down on juice I'm currently using 60ml a day I vape at 6 nicotine. I've tried Young my nicotine but it's to strong What I have not tried is using more wattage I currently watt at 80 but the women at shop said I cannot go any higher I have no idea why as my mod is 220w
-
Yes I do so I simple so it little by little bit by bit small seconds hold on the fire button instead of my straight 10 to 15 second then stop after a second or 2 then repeat untill wires are together