Walt

Beautiful!!!!

I've got a few of these laying around. They were essentially free to me per materials. I used discarded wood flooring.

The process I use is 1/2 hour in a vile on a magnetic stirrer with enough agitation to create a lot of gas bubbles. My stirrer isn't heated but the friction does bring up the temperature of the e-liquid. Then I give it a bath in an ultrasonic cleaner for 1/2 hour at about 100°F. I mix fruit and some with cream. All of my e-liquids come out pleasant. Per @Tam the creamy mixes do get better with time. I don't notice a difference over time with the fruits.

Very nicely done. Sharp set-up!

You should be able to put builds in any of those tanks with enough resistance to work fine with 80W and under. You may not be able to create a master blaster fog machine, but you will be able to achieve real nice vapor and great flavor.

Moving up into 24 and 25mm, Kylin, Dual coil Ammit, Serpent SMM, Griffin 24 or 25, Sense RTA-2, Smok TF-RTA, Ijoy LMC, Crystal Ball, Troll, Ammit single 25, and Pharaoh RDTA are all tanks I use and enjoy a lot.

Sorry, just caught the 2nd half of your comment. Dual coils in a 22mm are hard to find and hard for me, at least, to build. Pretty small working space. I like to use temp control and stainless wire. I also like to stay 2.5Ω and above. I also like Clapton for flavor. Put all that together and getting a build in that limited space is a bugger. That single coil Ammit might surprise you. It is quite the little performer.

You're welcome. I think you are working with the same constraint I am. I have a Q mini ml class that I absolutely love but it will only take a 22mm tank without hanging over. That can make the search a little tough unless you don't mind the atty hanging over. Then you open up into a plethora of wonderful RTAs. Especially in the last couple of months a ton of great RTAs have hit the market.

My pleasure! They really do beg one to latch on and have a vape.

Cute little buggers they are, they are!!!!

DJlsb Vapes, Mike Vapes and Rip Trippers are three good reviewers who review a lot of tanks. To start with both the Serpent mini and the Ammit are 22mm single coil RTA's and both are real nice tanks. Take a look at those to start with.

I'm not tellin.

Take it to this guy.

The wire wizard is pretty good especially with simpler builds. It has a tendency to calculate a little high with more complex wire structures. Nothing too serious, still gives a good swag to get started with.

My first choice for vendors for sure. And if you are into a pen style can't beat the Templar.

Yes, your question is way to vague. What do you vape? How long have you vaped? What kind of vape experience are you looking for? Are you asking about a manufacturer, a vendor or both? Where do you live (vendor choice)? I think you are going to have to give us more clues, lol.

Manufacturers are pumping out a lot of really nice products lately. These two came today. A Wotofo Serpent SMM and an AMMIT 25 single coil. They both have a bit of a restricted draw in comparison to say a Beast but the flavor is just top notch on both of them. Vapor is plenty adequate for me as well. Both have modest builds in them and are being vaped with TC. Nice juice capacity as well for short rta's. Nailed both builds first shot. That is definitely a first for me. I think they are just that forgiving regarding wicking.

That's a worry you simply don't need. I doubt you would flag a positive, but who needs the worry? If your friend can afford drugs, your friend can afford a vape.

Just did a little snooping and this is a know bug in the firmware. No worries. Your unit is solid and the 99% is just cosmetic.

Oh no! I'm afraid to have you use less because the resistance will be really low. Might have to use some Kanthal if you have some.

Give it time. It will sink in. Just make two coils, each with 10 wraps with that wire and give it a shot. Use a 3mm rod. Should make some great fog!

For clapton wire you have to use the wire wizard on steam engine and then divide the result resistance by two.

Ok, here is a good build for the 26*2+30 that you have if you can get 10 wraps on each coil. It will give you about a .23Ω build overall.

Oh ****!!!! I'm sorry. I went up to the top of the thread and saw the spool you have. My mistake. From the screen shot you posted I thought you were using straight 30g. Hold on for a sec. Be right back.

https://www.advancedvapesupply.com/collections/spooled-ss-prebuilt-wire/products/up-to-30-fused-clapton-316l-ss-core-28gx2-34g This isn't bad.