-
Posts
746 -
Joined
-
Last visited
-
Days Won
15
Everything posted by Edna
-
I vote for the ijust mini or ijust 2 you can put a 3ml melo III tank on it and it is topfill and has a nice draw.... that or maybe a subtank nano if you can't have more than a 2ml tank..on a eleaf 40w. It's small and has a 2600 mah battery in it and lasts a long time. I really like mine..... That might work well too. Personally.. I love my pico and they're on sale right here in the VT store They're small and stealthy I dunno but it sounds like a great trip and I hope you both have a great and safe time!
-
Will subtank mini replacement glass fit toptank mini
Edna replied to Foofightervapegirl's topic in General Vaping Discussion
There's always fasttech.com..... but they take forever, but you can get tanks and replacement parts cheap there. Good luck -
Good Morning Tam, I'm glad to see you got your computer problems fixed! It's a bugger when they don't cooperate Thanks, but I seem to be having trouble with getting the darn things right I can make them look pretty but I can't seem to get the build quite right...well on this one anyway. I'm still trying to get the ohms thing figured out. I know what I like.... it's just trying to figure out how to get there... Thank goodness for you all here giving me a hand with it.
-
-
Hi All...Sorry went to sleep before I saw reply's Thanks for your help! I was shooting for 0.3 I wanted single coil but since the ceramic thing-y didn't come I figured I had to build dual. I'm using nichrome 28g The diameter is about 0.3mm (how wide the coil itself is) I measure once I had both coils mounted. No screws were loose. I tore up the build and am going to start over.... drat it That would work. I am ok with 0.5 ohm I just don't want to burn the bejesus out of my throat with heat I like it on the cooler side. I had a guy at the B&M build a coil for me and it hurt to vape it was so hot. ( I haven't been back to that B&M since they've given me lots of bad advice)
-
Thanks Guys! I'll remember that one NO straight Black Cherry and keep it to low levels I think I did 5% maybe 3% next time. It still isn't that bad I'm hoping adding a bit more Chocolate will work If not lesson learned ...I'll just let it mellow for a long while. I have a ton of others juices to keep me busy.
-
Hi all, I bought an Avocado 3ml RDTA and I'm loving it. However I'm having trouble with the build. It keeps bouncing around on my mod. It read .19 ohms....Now after using it a couple of times it's suddenly reading .11 ohms on my meter. I took it off my mod (eleaf 60 watt TC) because the vape changed for a lack of better words. I Don't quite know how to describe... it but it was just dramatically different...So, instead of hurting myself or my new mod I just yanked it off until I could get some feedback. Should I just take it apart and rebuild it? My tank didn't come with the single coil ceramic thingy though it should have... so I ordered one and it's on a slow boat from china (slowtech) I want to keep it around 2-3ohms because that's what I seem to like. My melo runs about 0.26 and that seems about right. I built it with (2) 28WAG, 0.2 ohm Nichrome, 9 wrap coils (I hope that's enough info) They're not shorting anywhere or popping or doing anything else weird. I'm using a Samsung INR 18650-25R battery with it. So if I figured right the battery is ok for the build. I'm at a loss as to why it happened. When I first built it the flavor was amazing now ...not so much. Suggestions from you build wizards please I'm enjoying building and this is my first RDTA but it seems to combine the best of both worlds... flavor and tank...I still really like my Melo III and iJust 2 but I want to learn to build in case of things getting dicey with the new rules. The good news is that I just found out that eleaf has come out with RBA build kits for the coils that the Melo and iJust 2 take and I ordered 5 of them so hopefully I can stop buying the pre-made at almost 9 bucks a pack (fasttech) also because my B&M wants $15 a pack and that's ridiculous especially since I like dark chocolate desert juices ...I go through a whole lot of coils. Thanks all for the help!
-
Oh That does sound good I just made a 10ml batch with 15% Double Chocolate 5% caramel and 3% Bavarian Cream Letting it get settled now. My experiment with Double Chocolate and Black Cherry and sweet cream with a tiny bit of sweetner came out pretty good but I have to let it sit a bit longer.... I think it might need more chocolate because the cherry seems to be overtaking it. Suggestions please I want to make a Dark Chocolate Strawberry juice (that tastes like fresh strawberry, not candy) but I haven't found a recipe yet. I smelled the TFA strawberry and it smells sort of purfume-y I hope it tastes better than it smells. Does letting it steep help?
-
Time for a new build Thanks Thanks, I'll try a different build if that's not the ticket I'll out it in a different tank that uses some stock coils I have an Aspire one that should fit the bill
-
You can never have too much chocolate My batch is steeping right now I'll add in a couple of extra chocolate drops to balance it out. Thanks!
-
Is that what it is? I really like the flavor but the strawberry's flavor not strong enough. What build would you recommend? I re-wicked with a less bulky cotton and it didn't help much. I'm vaping at 26 watts with 0.25ohms single build in an avocado RDTA.
-
Hi Tam, You're welcome. Natural News has a lot news and links for vaping related things, I find that they usually research things pretty well. Lately I haven't trusted lame-stream media for the truth that much, I look for alternative articles and try to balance things out with what's right and what's not. Sometimes tho you have to take the alternative sites with a grain of salt too.
-
I really don't either, but I never said I wasn't going to taste it daily LOL.... isn't that why they made drippers... for a quick taste test I have a ton of juices to keep me busy until its ready. My favorite juice from vape wild comes freshly made so I usually have to wait on it.... So I'm getting better at patience (sorta)
-
WOW that sounds complicated ... I was just going to mix them up and shake them a couple of times a day for a week or so...
-
It does make sense, It's all about control and the almighty dollar sometimes.
-
I just found this on natural news and it linked to freedom news about big tobacco/pharma working with the dems to crush small vape businesses here's the link http://www.freedom.news/2016-06-27-democrats-are-working-with-big-tobacco-and-big-pharma-to-choke-off-vaping-industry.html
-
Oh Yum I'm getting my VG today and now to create (wringing hands together with anticipation) I can't wait Thanks @Earthling789 and @FXRich Both recipes sound delicious! I'm vaping the VT Adams Apple right now.... but might have to break out a new tank or two for these! What's the best steep time for the flavors?
-
I couldn't wait. The arrived in the mail and were hot from being in the mail truck but I had to try them right away! I dripped some Black Knight into my patriot RDA and I must say it was caramel/ vanilla smooth and tasty and Oh so good ! Perfect for after dinner or late night relaxing Then I re-wicked and tasted the Adams Apple and it was tart apple with a aftertaste of sweet melon.... this one might be my new summer vape. I really liked it. I tried the Edens Empire and liked it though I think I'd like a bit stronger strawberry in it. Maybe it just needs to cool down. I'll be trying it again soon. I could tell that I'd like it it was creamy sweet and rich. I'm not sure what to think of the Crown Jewels though..I'm going to try it again after my taste buds stop buzzing from the others. My first reaction was that It smelled sort of perfume-ish to me ...I couldn't get the taste/flavoring figured out very well. It wasn't bad at all... just different. I'm going to put some Adams Apple in my Melo III tank and enjoy it all this week while it's in the 100s here. It will remind me of a spring picnic under a big shade tree. I think VT Black Label has some real winners in this juice! I can't wait to try the King of Churn...That's going to be my next purchase All in all...Great vapes! I can't wait to use them some more and savor them
-
Can you post the recipe to the Chocolate Raspberry Cordial please that sounds delicious!
-
Oh yum I just got my flavor order in from TFA I'm going to have to try this one (happy dance) I found this one and I was going to try it too, but the coconut in your recipe makes it sound like a mounds bar and I love them Candy Bar All flavors are TFA 5% Peanut Butter 5% Marshmallow 5% Double Chocolate 3.5% Caramel 1-2% Sweetener
-
I'm into flavor vs clouds and like a direct lung draw with a lot of air flow mixed in so: I just got a Bellus RTA (5.5ml) that is great. Great flavor and a lot of vapor though I'm not a cloud chaser. I also like my eleaf ijust 2 (5ml's) especially now you can rebuild the coils (kit ordered separately). The eleaf melo III in 4ml's is a top-fill that uses the same coils as the ijust2 (so now also rebuildable) and I really like it too. Both of these also have a decent amount of vapor production. Then I also have a Dark Horse RDA that's nice too. Hope that helps a little
- 8 replies
-
- vaping kiko
- dimitri
-
(and 1 more)
Tagged with:
-
I'm excited thanks so much!
-
Preserving e-liquid for the future?
Edna replied to Eaglewtchr's topic in General eLiquid Discussion
Rats, I got my 250 ml of nicotine in VG maybe I'll grab one in pg too ,just in case.That should keep me busy for a long while Come on vapepocolypse! I'm going to meet you head on -
Good luck at the dentist I hope you have no problems Oil of clove is great to keep on hand. Just make sure you buy good quality and food grade though.