FXRich

That is why I'm sticking to my $25 flip phone, also I don't get service where I live so I could only use it away from home.

Here is a list of the top squonk mods, and some cheap ones. http://www.geekayvapes.com/squonk-mod/

The only problem I see with the wraith is it only handles N200 or titanium in TC, I prefer SS for TC. The Kanger dripbox 160 is about the same size and shape as the RX200.

Ever since I had the Dripbox I have used SS316 coils in TC mode, its worked great for me. Even used it a couple of times driving to town. Dripping and driving isn't recommended, but Squonking and driving is OK.

I got a 160w Kanger Dripbox shortly after they came out, the RDA that comes with it leaves much to be desired, but the mod itself is a great dual 18650 mod. It came with a extra bottle too.

In my opinion the juppi is a better setup than the cupti, it only holds 3ml compared to 5ml, but it will accept any 22mm tank with a 510 connection.

Pineapple by itself isn't very good, but when you add 2 - 3% to a mix it works out pretty well. Like you I got a 4 oz bottle of pineapple, and it will probably last a long time.

I also use a little Pineapple in a mix I call Fuzzy Navel. 10% Blood Orange 8% Peach 2% Pineapple Although there is more orange than peach, I can taste the peach more.

I make a flavor I call orange cream. 15% blood orange FW 3% Bavarian Cream FW 2% Pineapple FW I don't notice a acid taste, but adding the pineapple seems to bring out the orange flavor more. My taste is maybe different than yours, so I may not taste the acid like you do.

I was a little skeptical about squonking, but awhile back I got a Kanger 160w dripbox, and now I really enjoy it. The RDA that came with it wasn't very good, and I replaced it with a aspire quad flex tank. I use dual .8 SS316 coils, and end up with .4 ohms, gets a little hot, but works really good using TC. 7ml bottle holds plenty of juice too.

The 16C collets will take up to 1 5/8 material, and the 5C collets will take up to 1 inch material, big enough for what I do, besides I'm suppose to be retired if the machinery wasn't paid for I'd probably sell it, but since its paid for I keep working 2 - 3 days a week, keep myself busy.

I have 3 lathes the manual lathe has a 14 inch chuck, one of the CNC lathes uses 16C collets the other one uses 5C collets. Been trying to figure out what to make for the vape industry, but with the new regs I'm finished before I start.

I do have a 6 cubic foot vibratory tumbler for deburring machined parts, basically it a oversized reloading tumbler, I have used it to mix juice in plastic bottles before when I was running parts and it seemed to work pretty good.

Actually I could just build a adapter to fit in one of my lathes, I can turn them down to at least 50 rpm, one will go up to 6000 rpm (little too fast for mixing). But a 5 hp motor uses a lot of electricity.

I'll be sure to post a pic after I build one, I already have a magnetic tool to retrieve dropped bolts. I might be able to speed it up, depends on the gearing.

SS is non magnetic, but I think I might have some steel ball bearings

I have been toying with the idea of converting a old BBQ rotisserie to a mixer, if I use a plastic bottle I might even put a few SS ball bearings in the bottle to help with the mixing. But than it might be a hassle to get the ball bearings out.

If it is thin enough it might work for mixing, but have never tried it.

Besides I have 1 1/2 liters of 100mg VG I have to use up. At 2mg that's going to take a long time to use.

Found this, I hope it helps https://www.kritikalmass.net/proddetail.asp?prod=Vulture-Punch-Clone

I have been at 2mg for a long time also, in the past 6 months I have mixed a couple of my flavors at 0 nic, I'm certain I could go to 0 nic completely maybe I will in the near future, but not quite yet. Even if I go to 0mg I don't think I'll quit vaping, I enjoy it too much as a hobby.

Lately when I go for a bike ride I take a Subvod in my pocket that I carry upside down because of all the altitude changes around here, And a 160w dripbox in the sissy bar bag for extended stops. Dripbox has a 7ml bottle, and don't leak when changing altitude, don't even leak if it gets hot.

What I do is to double the wire and twist it where it goes through the post, helps a lot when the hole is drilled all the way through. Only have one like that, and don't use it that much.

I can't say anything about eleaf products, because I've never had one. When Kanger came out with the 50w Kbox I got one (I still use it) since then I have stuck with Kanger mods. Buying a 18650 battery is much cheaper than buying a new mod. Been thinking about getting a Hohm mod, but not committed to it yet.

I have been mixing juice for a long time now, and have tried non PG flavoring which contains 45% alcohol. The only difference I have noticed was the juices with a alcohol based flavor has a tendency to spit back more than a PG based flavor.