vaping_jake

how did you run the cotton on it

that is sort of true, but one resistor has to be at least 10x smaller ( the great the delta the closer to the lowest resistor ie 100x) than the other and its only for quesstimating. ie 2 resistors in parallel using the product divided by the sum equation ( lets ignore inductance for all sanity:) 10 ohm and 100 ohm = 9.09 ohms 10 ohm and 1000 ohm = 9.9 ohms 0.2 ohm and 0.5 ohm = 0.142 ohm 0.2 ohm and 1.0 ohm = 0.166 ohm

i like em all, really great stuff thanks for sharing. maybe coil building will stop my vape equipment spending one addiction for another...lmao

oops wrong picture, this one was before i cleaned the tank. but i assume everyone gets the idea

Did some shopping today, got a sigelie 150 w box, kennedy rda, artic sub tank, 2 mxjo 18650 batteries, 2 15 ml kilo dewberry juice, 2 unicorn tubes 30ml, 24g wire the juice is amazing and the artic has a 0.2 ohm JOC coil and can handle up to 80w. if i wrap the box i might just put the kennedy on the brass monkee black tube.

I hope not, and im will be looking or pieces with great engravings more art work

cool looking, i assume you would want to wic that with a single strip of cotton like one would lace a shoe? How was it performance?

ok i will try a 22g inner with a 32g outter or what i can get at a the B&M. i was hoping to keep the resistance down on the outter coil with lower guage wire. would like to target 0.25.

welcome to VT

i can only imagine, did that with hot peppers while cooking and i know the pain you felt. WOW no water just take the pain, forget water boarding this may be a new technique.

ya, the noon existing on board charging was what made me look at ipv, but its something i can over look. the on board charger is nice to have on long road trips and in an emergency situation

sent you a pm, about a J2P Box mod but here is another place you can get it brand new. The only i have with it is laser engraving. J2P Box Mod

ya i like prefer vape only shops to smoke shops, just a major difference in personnel.

I know they are in texas, i seen some boxes in NYC. They are gorgous. I am not a member of that forum, i did a search for the horimono but i can get u the information.

i also assume that one shouldnt go over 4 or 5 wraps. Since the outter coil will be absorb the heat of the inner coil i assume there is a delay before you get some vape.

ya thanks for the battery info, since the 150 is a few bucks more and everything is identical except for the silver lines even if i dont use the extra power im just going with the 150. I saw pictures of the ipv 4 and i hate the hole they have in it for charging. Why i cant say but when i first saw it i said what the heck. The only questin is whether to buy it or not

I saw it on the consignment shelf at a local B&M, the dragon caught my eye. The owner said the guy had itone day hated it and wants to get rid of it. I think he wanted 40 bucks for it. Why he was getting rid of it so quickly i do not know. Have you looked at these? Horimono Block custom box mod You can have anything you like etched on them, choose battery type, volt meter . Not sure of cost, but if i hit the one year date of non smoking i am getting one or maybe the copper cherry bomber by MCV. But then again we will see what is also floating around in 9 months..lol

I only wish Tam. Then to stop from both units being put where the sun dont shine; i would also have to get a burberry bag or a pair of jimmys and that would hit the budget a bit hard. I really need to work on my negotiations skills.

Welcome aboard Danielle !!

Ok; so i thought i would never be looking at 100w+ regulated boxes; but when i set up my mech mod at about 80w, i was blown away. The vapor was so warm and flavor was incredible. I tried the juice at different levels but nothing came close. And once i aligned the air holes right on the coils the vape is incredible. So i been looking at box mods and the two that stick out is sigelei and the ipv. now the price for the 150 is few bucks more than the 100w, thus i would pick the 150 out of that group. The IPV4 is expected out soon as a 100w box. Should i just get the sigelei, wait to see what the reviews on the ipv4 are or forget the regulated boxes all together. i hear the price for the ipv4 will be around 125 so there close enough in cost.

tugboat; thought you might like these. phantom

how would 26 wrapped around 22g do or should the delta of the wire be greater

shen; it hits hard, i had to get use to it at first. i am running a 0.2 load at 3.7 v. that should be drawing about 18.5 amps. im using mxjo imr 26650 3.7v 3500mah 35a igh drain rechargeable batteries. They are brand new as i ordered them once i kknew i want a 26650. I charge them at 0.5 amp rate. it sounds llike your not making a good contact some where, did you try a different rda?

@trey: im impressed i seen others do it and i could only imagine how frustrating it is. but the results are definately impressive

Sorry i just realized the notes didnt show up in the picture: the mods are currently setup as internal batt ip mini is set for 20 w 26650 brass monkee is built for 80w 18650 cartel is built for 69w 18500 nemesis is built for 45 watts 18350 gaia is built for 27w