shen_long86

And if that does not work i suggest hit up youtube and check out riptrippers video on the pancake wicking method for rta's

ok so recently i received my free stuff that i got from gearbest.com when i got a $30 gift card from the contest they held here on the forums. From what i can tell this clone is almost identical an authentic, but there are a few slight differences. this rda is a standard three post design with a gold plated copper positive post and gold plated copper 510 pin, which is adjustable. the post holes are fairly big 3 mm if i remember correctly, so you can run thicker wire through it with no issues. this clone did come with phillips head screws instead of grub nuts and they do tend to back out, but not really bad. it does come with the "monster" wide bore drip tip which i believe to be delrin, but i am not really sure on this because info of this clones specs is really limited. it also comes with an adaptor for your standard 510 style drip tips and it does come with a stainless steel 510 drip tip as well. the tolerances on the deck where the outer barrel fastens are fairly good, i.e. not too loose and not too tight. this rda can be run in either single coil, dual coil, or quad coil modes. you also get the standard bag of goodies with the atty, a length of silica wick, 2 pre-made coils, replacement screws, replacement o-rings, and the standard crappy blue screwdriver which is way too dang small for the screw heads. cons: if you try to unscrew the atty from your device the air flow control ring spins and tends to loosed the drip tip/top cap section positive post spins when trying to tighten to connection...really a pita outer barrel is like 1mm too narrow to fit on the deck and it cuts into the deck o-rings. only used the atty for maybe 5 days or so and already had to replace the upper o-ring on the outside of the deck because it got cut in half by the outer barrel. all in all i mean yes the cons are pretty big, but i got the thing for free and it still serves its purpose. i did put a video review up on my youtube channel Vaping With ShenLong, here is a link. https://youtu.be/0o9kkrWdPIE

Believe it or not i have seen several wal-marts that carry the soda

Tam darlin they still make tab soda

Yea that is what i have heard about twisted wire but i just dont have the time to twist it up.

Sweet coil but thats way too much work. For me anyways...lol

Very nice work...would love to do that.

Yeah i understand. Oh btw comp can you please pm me your info, because i want to send you a batch of the juices i have made so far and get some feedback from the master.

*raises hand* oh oh Tam pick me pleaseeeeeeee

Welcome to VT

I agree with you earthling i only started doing diy liquid at first to save myself some cash, but i did have the idea to see if i could sell some here and there. And i found a customer so far, but hey who knows word of mouth could get out and i could easily get more. But if the whole selling my custom blends does not work then i just go back to mixing for me and the wife.

Glad you werent hurt....i agree with earthling that 90%of the population do not need a license. And yes people do not know how to use turn signals anymore, the one that gets me is they dont use one and cut me off in my bigrig then have to come to a complete stop to make a right turn. Of course my response is "use your d@$! turn signal, and geez a$$#@#$ even i dont have to come to a complete stop to make that turn...and i am driving a 70ft long 80,000lb. battering ram."

Oh no not good hooker...let us know what happens.

Ran the cotton straight through each coil

Whoo man this setup hits like a peterbuilt doing 120mph, took 4 hits and fogged up the cab of my truck. Only downside is i can only get four lung hits then its dry as a bone, so yea this setup is a major juice hog.

First quad coil build on my darkhorse clone... 28ga kanthal on the 1.5mm coil master rod, 8/7 wraps each coil comes in @0.29ohms now time to wick it and she how she works.

Jake wheres my sigelei 150w??...j/k nice shopping spree though

I have a full size nautilus and with a stock 1.8ohm coil head i ran 2 30ml bottles of cuttwood juice through the same coil and didnt kill it...until i tried to run my own blend of 90vg/10pg through it. That killed that coil and if memory serces cuttwood makes nothing but 70vg/30pg

Nice mod there Mplough...want to buy me one too??...j/k...lol

No i didnt try a different rda i will when i get back to the house because i left it at home this time...i am using the same batts.

Jake on that brass monkee what batts are you using and whats the amp draw...im curious because i couldnt get my cartel to hit harder than my ipv mini

Rollin' down the street drinking water...vapin' on choco-nut!

Probably too much that i dont have the funds for...if i make any other big purchases...the old lady will have me 6ft. under!

Lucky dog hooker!...nice mod though

Im jealous jake