Squid

If memory serves me correctly the Picco 25 will only fire down to .3 ohm coils.

It is generally not advised to mix battery types in a devise. There are too many variables in the manufacturing process, batteries rated the same by 2 different manufacturers could be vastly different in performance.

Congrats. After almost 6 years of vapong, I have just cut my subohm tanks to 1.5mg, and my ohm-plus tanks to 4ishmg. Working toward that 0mg goal slowly.

For setting up in wattage mode, it's pretty much the same for all mods. For coils under 1 ohm, I start around 10watts and slowly increase until I get a vape I like. You'll get a burnt taste if you go too high, back down half a watt or so and you have the sweet spot for that juice. As an example I run .5ohm coils around 25 watts. Sometimes a little higher sometimes a little lower, depending on the juice. Then there are a few juices I get on occasion that I will run as high as 45 watts. There is no magic setting that a specific mod will run at, just a ball park.

TC not for use with Kanthal on 99% of mods out there.

That's the other thing I do too. I run the defroster at all times to keep the vape off the windshield. The only exception is if the windows are all open.

That's possible, I use paper towels.

I use ArmorAll window cleaner. Takes a bit of elbow grease and a couple doses at one time, but it works for me. Back window of my truck is tinted anyway, I don't bother with it.

It happens, and that is why forums such as this are here. I like my babybeast with the .4ohm coil around 35 watts with a 70vg/30pg juice. It does change a bit depending on the flavor I am using at the time.

To my knowledge, all Smok coils are kanthal, so you should be running in wattage mode. As far as the blinking lights, I am no help, sorry.

For that style battery, have you tried gently prying the center electrode up a bit with a toothpick or something similar? They have a tendancy to get pushed down on those type. You just want to gently pry up a bit around the edges of the center piece of the battery. Just a bit to make it come up.

My guess on the way they come up with the recommended range is a dart board........ I personally have very rarely if ever found the recommended range to work for me. For example, I run my baby beast with the .4ohm coil around 30-35 watts depending on the juice. 40 is too high for me.

Not sure about the calculations, but I run 25-30 watts on my Ipower 80, .5ohm coil. The setting varies depending on the juice I am using.

I wish I had an answer for you, but @christopher should be able to help out on this one.

I don't even have a "favorites" tab. Just the bookmarks, the only place I have seen "favorites" is in IE. It could be that I set up FF years ago, and got rid of the favorites and my settings have stuck through all the upgrades. I just have my bookmarks list set up in categories, and the sites I go to most often are at the top of the categories. I am liking the new version for the most part. I am going to at some point when I can sit down and mess with it try to move all the buttons back to where I have grown accustomed to them.

I'm no doctor, but this coming March will be 7 years of vaping for me. I haven't had any of those issues. I would look else where for your issues.

Welcome.

Welcome to VT.

Priming generally refers to setting up a fresh coil. Putting a few drops on the cotton of the coil before installing it in the tank, or letting a fresh coil sit for a time in a full tank of juice. A combination of the 2 methods can be used as well. Never heard of "priming a coil" repeatedly. Can you elaborate on the process you are using?

Nice, I will have to keep those in mind for a couple of projects I am looking into.

Where did you source the 3s LiPo's? I was not aware that there are any out there that small. Unless that box is a lot bigger than it looks.

Might I suggest changing the name of this section from "Feedback, Help & Requests" to "Site Feedback, Help & Requests"? Seems that from time to time there is a bit of confusion and quite a few "Help it Broke" topics get posted here......

Thanks again Walt, finally ordered the o-rings, and they got here yesterday. Popped them in and back to using the Starre, I love this tank, good clouds and great flavor IMO.

Walt, you're the man!

Long story short, dropped my Starre tank, broke the glass. Found the glass at the local B&M. It went all bad when I unscrewed the tank and the broken glass cut the o-rings. I have e-mailed Freemax, but not too hopeful on an answer. Does anyone know of a place to get the o-rings for this tank? I tried slowtech and sweetvapes, and an internet search all with no luck. I will be trying to find them at Lowes or Ace locally, but they are square rings, and quite small. I am not opposed to regular o-rings that will seal. Any help is greatly appreciated.