Tug

It does look pretty damn good lol

Samsung 25r all the way

The Sigelei 150tc is a 150w dual 18650 device capable of Wattage mode and Joule(temp control) mode.Wattage on this device ranges from 10w-150w.Joule mode ranges from 10j-100j.Output voltage is 1.0v-7.5v and input voltage is 6.4v-8.4v.Temp ranges from 100-300 degrees •C/212-572•F.Atomizer resistance is 0.1ohms - 3.0ohms.Max current is 35A.Dimensions are 103x57x25mm and weighs 190g.Low voltage protection,Low resistance protection,input high voltage warning,Output short circuit protection,reverse battery protection,Overheating prevention as well.The texture on the Sigelei 150TC is really nice with a rubbery type feel.proper battery venting.Buttons are nice and clicky.Nice bright screen displays all the info you need,ohms,voltage,wattage and battery life.Spring loaded 510 everything I have put on this has sat nice and flush.It did come with a clear silicone sleeve also.The only con I have found with this device is the battery door.Although they are held on by magnets they aren't strong enough to keep it on the device very well so unintentionally the door can come off if you don't use the silicone sleeve.Besides that it works very well and does what it advertises.My honest opinions on this device are good but not amazing .i would give this a 7 out of 10 rating IMO.Thanks guys! Go check out GearBest's subforum on the main VaporTalk page! This was sent to me from GearBest for the purposes of this review.

Welcome to VT

the Joytech VT is a heavy bastard too

Just say sure I'll make you some but you're not getting that **** for free lol.

The Sigelei 150tc is a 150w dual 18650 device capable of Wattage mode and Joule(temp control) mode.Wattage on this device ranges from 10w-150w.Joule mode ranges from 10j-100j.Output voltage is 1.0v-7.5v and input voltage is 6.4v-8.4v.Temp ranges from 100-300 degrees •C/212-572•F.Atomizer resistance is 0.1ohms - 3.0ohms.Max current is 35A.Dimensions are 103x57x25mm and weighs 190g.Low voltage protection,Low resistance protection,input high voltage warning,Output short circuit protection,reverse battery protection,Overheating prevention as well.The texture on the Sigelei 150TC is really nice with a rubbery type feel.proper battery venting.Buttons are nice and clicky.Nice bright screen displays all the info you need,ohms,voltage,wattage and battery life.Spring loaded 510 everything I have put on this has sat nice and flush.It did come with a clear silicone sleeve also.The only con I have found with this device is the battery door.Although they are held on by magnets they aren't strong enough to keep it on the device very well so unintentionally the door can come off if you don't use the silicone sleeve.Besides that it works very well and does what it advertises.My honest opinions on this device are good but not amazing .i would give this a 7 out of 10 rating IMO.Thanks guys! Go check out GearBest's subforum on the main VaporTalk page! This was sent to me from GearBest for the purposes of this review.

My SO was missing her Dish so she jumped on a deal from Dish, part of it was free Starz. I'm watching all I can before its the free Starz is over. So far I'm really liking this. Evil Dead is one of favorite movies. Like Earthling said it has that feel of the movies.

I am finally happy with my charging situation.  I picked up a new 6 bay Efest and I am really impressed.  I like being able to check on the state of my batteries from my phone.  I also can increase the mAh of charge from my easy chair in the den.  Now to build me a better charging station/battery tester/and vape stand....
 

Anyone else seen it yet? Classic Bruce Campbell can't be beat,this might be my new favorite mini series!

Me too I love the campy style that Sam Raimi brings to all of the Evil Dead movies.Greg Nicotero did not do the makeup on this mini series but I'm not surprised since he has TWD to deal with.

All the pre-cooking is done......
 
hope you all have a nice day off and get to enjoy some friends and family and a relaxing day.
 
i am thankful for all the good advice and comraderie and the funnies. .
happy Thanksgiving
 
mike

I really wanted a D2, but the price kept me from jumping on them... When Cloupor came out with the Mini-plus (50W-TC), which is the same size as the 30W mini, I had to order one   GearBest had them for $29, which is the same price I paid for the 30W Cloupor minis, so I'm currently waiting for delivery...  I've not tried temp control yet, but I do have a box of Nickel coils for the ST-mini... so we'll see how it goes.  If I don't like it, I can always make good use of the mini in standard Wattage-mode... although I rarely go above 25W... it is nice to have a small mod that will handle higher Watts when needed (without breaking out the IPV-mini-V2)...

I have really enjoyed temp control.  The D2 performs very well in temp control.  In fact out of all of my TC mods it is the most consistent, and the most comfortable in my hand.  The Evic mini is a bit neater, than the D2 with the better screen and upgradeable firmware, but in Ti mode the D2 just works better.  Ni200 can be a bit of a challenge to work with but I have gotten very good results.  I have never tried the Atlantis Ni200 coils, but the Herakles Ni200 work pretty good.  I am currently in the market for a Crown, and RBA section for it.  I am also thinking about getting the new Melo 2 RBA to use in my SauceCode, after I replace the glass.  I broke 2 tanks in 2 days last week.  Luckily I haven't broken anything this week!

I will have to agree that this is a great mod.  I ran mine from the first of August to the end of September, when I got the Evic VCT mini (a good mod too).  I switched back to D2 last week because it seems to handle titanium coils better than the Evic.  I will probably be buying a few more of these for backups.

The ipv D2 takes one single 18650.The wattage output is 7w-75w and the Output voltage is 3.6v-7v (under power mode).The output joules are 10j-50j and the output voltage is 1.0v-7.0v (under joule mode).Input voltage is 3.2v-4.5v.Output current is 1.0A-25.0A and the Input current is 1.3A-30.0A.Standard resistance is 0.2ohms-3.0ohms and the Joules mode resistance is 0.05ohms-0.3ohms.Temp Limit centigrade is 100 degrees c-300 degrees c.Temp limit Fahrenheit is 212f-572f.And the chip is a Yihi SX130H.In the box you get your device,a user manual and a micro usb charging cable.There are several safety features on the ipv d2,low voltage protection,low resistance protection,High input voltage warning,output short circuit protection,reverse battery protection and temperature overheat protection.Typical 5 clicks to turn the device on and the rest is very self explanatory.Overall I've been really impressed with this device,very well built,battery sled is neat and clean.Spring loaded 510 and everything I've put on this has sat flush.Proper battery venting and there is a charging port for external charging but I Do not advocate doing this.Charge your batteries in a separate charger like a nitecore for example.I also forgot to mention that is also comes with a nice silicone sleeve.I will give this device a 5 out of 5 rating.Top notch and I am impressed with it,I don't really mess with temp control but this device has got me wanting to give it another shot.Feels good in the hand and is a pleasure to vape on.This was sent to me from GearBest for review,and please go visit their subforum on the main page of Vapor Talk.Thanks Guys! 😤💨

Finally got my crosswood box mod in, dual 18650 unregulated. Batts are charging then i get to test it out.

Anyone tried the new kanger 18650's?

Second batch is resting did a 30ml Hazelnut  Im diggin this DIY
First batch I made tastes better everyday

Welcome to VT! 👍

Just watched it, Tug... OMG, it is classic Bruce Campbell!  I loved it

I have one but I don't want a warning lmao

I can tell you that is. It is a BernZomatic solider iron/torch. I have one for coil building.

Got the HexOhm V3 the other day for review.Review coming soon.