HerBodyTwitches

Wow this is the third forum I've asked this on and no one has any input?

Sorry I know this isn't the place to post but I can't seem to post anywhere but here for now I'm looking to but a 26650 mod and was wondering what 26650 batteries you guys using for sub ohming I know the sony 26650s are discontinued and I've heard the panasonics are safe to use are there any others out there that are safe or better than the Panasonic?

Yeah this panzer has 4 vent holes and I'm still playing with different wicking styles watching YouTube video after video trying to find something that works for me what I've been doing is running a piece of cotton through each coil cutting just outside my atty and tucking the two sides under each coil...and this stillare has pretty large air holes that I have opened all the way and I've milled out my drip tip.

Thanks for the info and the concern!! I double check my coils without and with the top cap on and I'm using Sony VTC5s but I'm paranoid and won't build lower than .20 ohms. But I'll have to try adding some vg to the juices but I did just order some 100% vg so I can enjoy my mod.

Thank you I may have found my problem!! I built a single 1.27 ohm coil and it's much better so I'm thinking maybe it's the pg level? I think most of the juices I have are 50/50 I'm going to try a higher vg with the lower ohms and see if that makes a difference.

So I'm Jordan I started vaping about 6 months ago I've recently stepped up to mods and rdas and I have some questions that I have no one to turn to for help so I hoping one or a few of you can. So I just built my first mod a panzer clone with a stillare atty one thing I've noticed is the juices I used in my aspire bdc are extremely harsh compared to what they were in the aspire? Is it the nic level being more intense in the rda? Is it that I'm not used to the sub ohm level the aspire was a 1.8 ohm and I'm running a .32 sleep coil in the stillare I'm just wondering if it's me or am I doing something wrong?