Tx Biker

Gear beast changedthe pricing the other day to $9999.00 I guess they got ahead of themselves. I've sent 2 emails to Hcigar about what battery it has with no reply to date.

TC is evolving fast. More and more companies claim to have the next latest and greatest. Evolv is going to release their 200w TC board soon also. Who knows when it'll slow down. Reminds me of the p.c. evolution in the 90's at times technology jumped weekly. I backed away from TC last weekend. Things are happening too fast and I didn't want to have something that wouldn't keep me happy for more than a month. I'll watch from the sidelines for a while and happily vape my sig 150 with my atty of the day till the dust settles.

Either the DNA 40 or the YIHI SX350j or sx 330v4 if your interested in temp. control or might be down the road. Either way is a good choice. I've been using a DNA 40 for a while and like it. I don't have a need for high wattage or I would have went the YIHI route.

Here's some for $65 Coupon code: IPV4vapingcheap At http://www.wakeandvape.com/ipv4-pioneer4you-in-stock-ready-to-ship/ Not bad at all.

I'll see how it shakes down at my B&M they use what they sell. Also they show it .2 ohm capable but it's stated clearomizer. I wonder how it would handle a 3mm 26ga dual coil at .2? A 50w istick will not without losing it's little mind until you remove the atty and plug it back in to the usb, but will deal with tank systems premade coils below .5 o.k. No doubt that this one will be better than anything ismoka put out it is innokin after all.

I started missing my 30w and had a void to fill in that range. Almost pulled the trigger on another new one when a deal came along on a vapor shark 30w that I couldn't pass up. I started putting money aside for a SX m class till the wife started getting the wants for my shark. She had me pick up a RDNA 40 scratch and dent from vapor shark so she could have my 30. Not like I'm complaining or anything but I would have thought she could wait until I finish building my DNA 40 powered bottom feeder.

Theres a lengthy discussion on another forum from people that have been using it daily for a while now. For the most part people like it there's just a few quirks to deal with. I almost picked one up but got a deal on a Vaporshark with an updated DNA 40 and I also have a new DNA 40 to put in a box so there was no need.

You'll like it. The YIHI board works well and does a good job of regulating power. It likes the new sub ohm tanks and plays well with them. The only complaint I had is that the finish was delicate on my black one. Unfortunately there were no silicone skins to put on them at the time and I had to wrap mine. My brother bought mine from me and it's still going strong.

The problems that I've had so far were the first one screen failure, then auto fire which got progressively worse, the inability to go below .5 without it losing it's mind and giving me a light show, misfire due to misaligned button, switching between vv and vw sitting on a desk. I've had mine replaced a couple of times now and gave it to my wife because it might live longer with her. She never go's below 1.2 with her ST mini but the 50 has no issues with her 2.5 ml ego one tank at .5 prolly the smaller gage coil. Her tanks don't leak from fill screws or an over filled dripper so juice won't get inside and short the board. I've since gone back to my VS DNA 30 while I build my DNA 40 and wait for my new VS with a tc board to show at the house in the next day or two. The 50w is still a decent mod for the average to a little more advanced user even with it's limitations and some improvements over the first run seem to have been made unfortunately it didn't pan out for me and in a couple of days it will be back up only cause the wife wants the DNA 30 with a different colored shark skin when my new toy shows up.

Y'all research it a little. The Kangxin board is a little wonky it has issues coming out of sleep mode and holding settings also boost buck is so so at best to name a couple. Most people with one say it does good in temp mode though and if your not changing attys alot it works decent for the price. Also I've seen the IPV 4 selling for $65 and change, the yihi board is stable and temp control works great. I won't link to the forum where it is being discussed prolly tick off the mods if I do. Just something to think about the ChiDNA and other clone boards are not up to the authentics in performance. Got a couple of Isticks that are proof of that.

That'd be the one.......V2 is supposed to address the top cap, and juice control ring for asthetics and a couple of other things.

Look into the UD goliath. Huge airflow, access the build deck without emptying the tank, massive juice channels, afc, juice control, 3.5ml capacity, easy bottom fill through dual ports. V1 should be shipping soon. V2 with refinements to release late April.

http://www.steam-engine.org/coil.asp This is what I use. I'll check out coil toy when I get off of a g.i.s. Tnx....

Battery indicator is close. I get 3 or 4 days on a .7 dual coil at 25w. When it gets down to about half it drops faster once the boost circut kicks in then it's working harder to keep up with demand. Mine stayed at a quarter for half a day then shut down. I've still got a few more charge/discharge cycles to go then I figure I'll average 4 days between charging.

Hard to beat the 50w. Mine came in Monday fully charged. I dropped my modified Orchid on it with a 26g 3mm .7 build and started running it at 25w. It still has half a charge after 3 days use. You can set it to run volts or watts and rotate the screen for left or right. The stainless threading in the 510 looks great and power regulation is very good. It's still not comparable to my sx 330 or dna 40 I built but still a very good mod and hard to beat for the price.

Driving/Riding: Beyang 30w/Orchid or nauti mini Work: Beyang 30/Orchid Home: IPV2/Dark Horse/Doge Club Restaurant: IPV Mini/Atlantis or my work setup depending on the establishment.

Well let's see. My gear from a group buy came in. 2 new Beyang 30w mods no lipo in these like the Istick my only complaint so far for a cheap mod. Gimiky flashlight built in but I used it a couple of times already. Another Orchid v3 for the wife she complained that we didn't need anything else until the first pull with a .7 build then silence she's been vaping her face off since. Another Tug clone for grins the last one worked great. Waiting on another group buy for a 50w istick hopefully shipped before Chinese New Year and a Delta 2. Finally got the machined top cap and fdv 510 in from a friend to fix the wifes old 20w istick. She likes it and will use it for back up just gotta spend 15 minutes on it and be done.

If you look at it for what it is it's not a bad device. The one thing to really watch for is the poor threads in the 510. I unscrew the tank from the base on my wifes nauti mini, she dosen't like the ego adapter or the bending adapter. I had the threads come out of one already but got that fixed with a laser cut top cap and a FDV 510 plus another for when the wifes finally strip. It's not if it's when. My two fire 1 ohm builds fine never tried to go lower. The igo l has the 1 ohm and the orchid is at 1.1 and great flavor. If I want to go lower I'll use the IPV2 or the IPV Mini. I don't think I've been lower than .8 in a while or too much over 30w. My magma lives on the IPV2 which needs a new build it's feeling neglected. I'm playing with the IPV mini and an atlantis today. The repaired istick is in it's pocket on the bike ready for the ride home.

I use an igo l at 1.1 on mine Works great. Be even better when I put tne new topcap and fat daddy 510 on.

Top caps and fat daddy 510's for the isticks. Problem solved with the little mods this evening. I can use my igo l with the 1.1 build again and the mini for on the go and the ride. The Ipv is taking a back seat until the istick fails again. Hammond box for the dna40 build should be back from hydrographics tomorrow and since it's supposed to rain this weekend I'll be starting that build.

My clones look so good compared to the genuine that you really had to look close and do a function check to really tell. The air control was the only thing on mine that was poor quality it works o.k. but sometimes sits of center and slightly restricts air flow. The clone bvc couldn't handle more than 7w and was slightly shorter than authentic. Also with the genuine bvc id stopped leaking in the air control. Other than that mentioned you cant tell any difference between my two.

I let go of a couple old tanks too just couldnt send the et-s though. Aspire selles them for $10 for five I'll get them from there known genuine and faster shipping. Might give a new life to my back up tank.

http://www.3avape.com/aspire-bvc-replacement-coil-heads-5pk-p-156.html Found these this morning bouncing around the web. Gonna place an order next week and giv'em a try. Youtube video posted on these too.

It's impossible for me to drip and ride. My juice maker let me play with his rig while he was finishing my juice order. Ya it hooked me I haven't jumped because I ride full time though. Then I took a couple hundred bottles to another friends store for him and was introduced to a reo. Now thats the answer to all of my problems except one rounding up that kind of cash. Told the wife to put a hold on the ipv2 and just get batteries for the vamo. Might have the funds saved by thanksgiving if I stay out of the shops except for juice.

From the new members page go to the smoke free counter topic then click a smoke free banner and fill in the information it will walk you throgh the steps.