VaporTron

Sony vtc4, coils vary. See OP

I have a mech/tube mod also sometimes the button on the very bottom gets so hot but when i take the battery out it is so cool

Uh, the rattlesnake effect (for those that never experienced it) is a pulse in vapor production from these PWM APVs. It is sensed by hearing alone. The rattlesnake effect is loudest when is the power button is pressed without anything contacting the drip tip. The rattlesnake sound is related to the 33hz chips used in the APVs, but is nowhere close to being an audible 33hz tone. The sound actually seems to cycle a few times per second. The rattlesnake has no effect on vapor quality that I can detect. Nobody is going to see a difference in a coil glowing with DC power pulsed 33 times per second compared to a coil powered by pure DC. The same goes with vapor produced by the coil. Unless you just don't like the sound, the rattlesnake effect is a non-issue. So i found that on rattlesnaking but no that is not what i am experiencing. When i am pulling a toot the button will vibrate a little and feel hot. Not the atty.

The heat pulls the juice up the wick. So as long as the wick isnt too tight you will be ok. If you are making nano coils (smashing them together real closely) put your cotton under the coil, not through it. Check out youtube. Search "28g 1.2 ohm" or whatever you are looking for at youtube or w/e. A lot of great odeas on twitter and fb also. Good luck! Try putting them together real close then strum the coil gently with a flathead to get little voids in between wraps

Looks real nice, great design. Tc looks like it works well. Lcd screen flips with gyroscope. However I'd rather have my batteries built in with a tc mod. Let us know what you decide!

Basically you have to stay under the max amps if your mod doesnt auto shut down when trying to fire coils at too low of ohms (resistance) i didnt see your battery on this list but there are others. Search safe battery chart and ohms calculator

What batteries do you have? Or are they built in (li-po)?

Got one more, My mutilator came in! Dual 24g coil firing at .3 ohms (+/-)

So i got this sony vtc4 from a b&m over here and when i vape sometimes it feels like it is vibrating a lil bit. Maybe this is the button rubbing the negative side and causing a "slide"? Has anyone encountered this? Also mod is heating up but maybe because i am sub ohming (.3+/-ohms) I used a smok protection chip but it was only firing for 1 second so i took it out and now fires as long as i want but this has happened about 5 times over the last 48 hours, at different voltages with different coil resistances. Also i take the battery out and it is cool to the touch. Wtf vape

Hell yeah lol reminds me of bumble bee (transformers)

What Color evic?

Thinking about getting the EVIC VT What do you guys think? Do you have one?

Thanks a lot for that! The more i look around i think i need a tc device

Is there any danger in increasing my volts past 4.2?? My mech mod is unregulated. I had a smok chip in but it will only fire for 1 second with the vct4 18650 for some reason but works great with my aw 18650 for over a year can hold over 8 secs Is there any advantage of a vw mod? (besides built in ohm checker lol)

This is my current setup. I like cloud chasing and flavor. Looking to get a vv/vw device but not sure if there is any real benefit. When i fire my .4ohm coil in my vct4 it get its own wattage based on battery voltage remaining. So how do the vw devices work? Are they worth it? Should i just stick to this set up? Is this device limiting my builds anyway? Thanks fellow Vapers.

Created these two monsters today. I dont have an ohm reader/check but use a multimeter. It only goes to 0.0 not 0.00 so i dont know the exact ohms (i.e. only know 0.6 ohms instead of 0.63 or w/e) Stove top is 24g kanthal and fires at 0.6~ Parallel is 24 g kanthal firing at 0.4~ Boy howdy does that stove top drink the juice! Can't wait til i get my mutilator tomorrow!

After a long hiatus I am back! A lot of changes have been made over the last year, how has everyone been!?

I'm dripping 24

Not sure

exactly

No it's this one https://www.vaportalkstore.com/mobile/Product.aspx?ProductCode=kanger-dual-coil-1.5

It's true, Some have water so they go quicker

If you do not smoke cigarettes, you should not start vaping, IMO however, no one knows yet if it is "safe" we only know it is "safer than analogs" E hookah has been around for awhile and it pretty much is just 0mg vape juice.

Kanger mini pro tank 3 coils same as the evod 2 (evod glass) and aerotank all the same coil

Howdy (: