VaporTron

I like to build coils too much lol i throw them away just to try something new. I like the mkii and am getting one i hope it wont leak everywhere. The uwell crown i have has prebuilt ss coils so it was nice and the rba head is coming for that so i can rebuild ss on that no leaks perfect rta The tfv4 mini you can rebuild also no leaks very nice with an airflow in the drip tip which is pretty cool So i have figured out the rx200 and the temp control is really awesome! I do love it a lot. I originally posted i got the dna but at the time i didnt know actually i was so excited it was ss capable and he said he did the upgrade so just assumed Anyway it is supercool i need to get the silicone case because i did drop it off my desk and the batteries flew everywhere. The magnets arent strong enough for that. No damage done took it like a champ so did my mutilator rda that i was dripping on atm Also on the second charge i did it again via usb and the totals came out around 4.13 each. The batteries last me about 2 days on average! ~7 hour charge via usb...my 4 port nitecore is otw Id say dont need a dna this thing is the bomb. I might get another one or just extra batteries so i never have to set it down Now to find an adv juice....

I love to build coils but i need a tank because i hate dripping in the car and at work. I want a rebuildable tank! I have the tfv4 mini and uwell crown (ordering the rba coil head) but am waiting on my ss wire and i need another rba tank!!! Thinking on the mkii because the design is amazing but i cant be leaking when laid down or w/e

Favorite rebuildable tank?

At first it seemed better before i did an update.

Main question is does this atty leak? As long as you wick it well it shouldnt leak right? Even laying on its side?

i have an itaste and sometime when you screw it down it messes with a little pin in the tank/clearomize. unscrew the tank from the itaste and see a pin under there and pull it out a llittle bit with some tweezers and then screw it back on n try not screwing it down all the way.

i did clean it really well and still has the issue and really i think that after repeatedly testing this thing that it just cant handle the low ohm builds under .5. The whole mod just heats up so much. it is a really great mod but heats up really quickly. other batteries i have can go to .5 and it is fine. i can use the vct4 with .5 builds and do fine but when i go to .4 and .3ohm coils it heats up so much. the battery doesnt get hot but the mod does.

So the Wismec RX200 is pretty cool. I upgraded the firmware and it seems to be doing the same thing. So has anyone noticed that in a higher vg ratio/less nicotine ratio in their juice requires for more heat on TC mode to get the same kind of vape? Craft Vapery "its Toast" 6mg 40/60 pg/vg i could vape at 400 really nicely and then another flavor Staggs "XXXXXX" (cantelope) 3mg unknown pg/vg ratio has to be upwards of 550 degrees or temp protection kicks in. so is tc kicking in bc my wick is getting dry? in a tank i dont think so. im using the crown .25ohm ss coil and it heats u after a few chain vapes so i am using it in tc mode at 500 deg. at 90 watts or in watt mode at about 50 watts how high do you run your ss coils in degrees? watts? how high do you run your kanthal coils in watts? i am not interested in any other coil types. There is definitely a flavor boost from kanthal to ss i have noticed with same juice tests i ordered some (100 feet) of 0.3mm 316l and some texas tuff cotton last night!!! battery charging! when i first married the batts i used my xtar two port charger and had to run twice because theres 3 batts so each trip on the charger took like 3 or 4 hours i cant remember exactly but it was like 7 hours total before i could use the rx200 well after like 3 days of constant use it was dead. it didnt stop me from vaping but i decided they were low enough. the rx200 read the batts at 3.33,3.37,3.36 in that order and i set them to charge at 1030 pm last night (in the device, powered off with no attys on top). at 5:30 am the batts were still charging and at 6am it looked as if they were done by the way the charger icon was blinking. i let them sit for about a half hour or maybe an hour and check the batts on RX200 and it read 4.08,4.09,4.09 in that order. my greenlee dm-20 multimeter says they are all at 4.1. Battery university says it is better to get a partial charge than a full charge so the batteries last longer so i think i am ok with charging them in this manner. i wish it didnt take so long to charge though.

Sorry to hear good luck

Aww that sad little cell lol

Where do yall buy your batteries? Have you seen the "sub ohm cell"? Thoughts?

I have found more cons than pros for titanium and nickel but for ss i have found very little but also ss is used to cook the food you eat! And thats why its either kanthal or ss for me. I was in the vape shop looking at mods and the ss feature on tc was the tipping point for me, had to have it!

Today i bought a little more japanese cotton, some Staggs 6mg "mourning dew", and a SMOKING tfv4 mini A little review on the craft vapery "its toast" juice. Very little (if any) raspberries on my toast. Its not a bad vape, i do like it; kinda nutty and bready but no berries man. I'll give it 3 out of 5 vapes.

Oh i actually got the samsung 25r

It really looks and feels great. My batts are still charging so i can only pretend for the next hour but i primed the 0.25 ohm ss coil and filled the tank and am waiting... Really excited!

Just got the reuleaux dna200 whaaaaat it uses stainless steel in temp control whaaaat lol then i got the crown ss tank and some (razz)berry toast juice 6mg 40pg/60vg omg and also got 3 lg 3000mah batteries to marry for my reuleaux dna200

So i made this clapton coil and it is alright 1.0 and i think i found my sweet spot. Also have this 1.0 dual coil and they are both just warm and cloudy enough for me. Clapton is cool but not that impressive. Better than the stove top tho Anybody else in the one ohm zone?

Check this out also https://youtu.be/O-arksEDiBc It's about Titanium He makes a great point about and flirts with the idea of temp control with kanthal at the end

Hey check this video out https://youtu.be/cKlDLtcy9Es Thoughts?

Absolutely, My greenlee dm-20 has a .1 resistance

Im getting a tc regulated mod asap...maybe the evic vt

Sigelei silver dragon mod from kidney puncher. Vct4 is real based on those sites you sent. I always double check my coils and battery level with a multimeter and give plenty of headroom.

Do they make a 30a fuse? U think will stop my issues? Is my battery bad? Is this atty bad? Did that trip the fuse? I tried like 10 times before i removed the fuse

Thanks for that!