loneranger721981

Wife just called and I got my vape mail today. Brand new rsst and my flatline juices. I cant wait to get home and start playing. I just hope it came with wick because I dont have any more.

I have tried the twisted. My evic tells me a short every time. Not sure if its too low ohm for it or what is going on.

I jumped in and drilled the hole out 2/64 inch more and it made a huge difference. I tried a straight lung inhale with my 100vg medic juice and it seems I have reached that asianic level of vapor. Its only at 1.4ohm at 5 volts and its a volcano.

I have my stock aga t2 without drilling out any holes. It has a very tight draw. Its way tighter than my davide. Not sure what I want to do though. I know you cant put it back once you drill it out.

I figured I would ask everyone here. I have tried doing a straight lung inhale from my aga t2 and I choke every time I try to do it. I can draw into my mouth and inhale no problem. Does anyone else have this problem?

Signed. Hope this does not go thru. I will make my own juice if I have to.

Just made my first nano micro coil for my davide. Its rockin 1.8 ohm and vaping like a dragon at 4.2v on my evic. Really starting to be a hobby.

Just built a twisted micro coil and it is working ok. Got it down to 2ohm with 7/6 wrap I think. It seems to take a lot more power to get it going. I started at 3.5v and went up from there. I did find out the deck on my rba is getting hot. Not sure why. I keep following and watching videos that rip tripper is doing to get an idea on what to play around with. I am just not getting the vapor production that he gets. I might just order me some silica 3mm wick to put in it because the stainless does not seem to wick right for me.

Finally got in some 28g kanthal and what a difference it makes. I've gottwn my first micro coil built on my rba and with a 9/8 wrap hits 2 ohm on the dot. Took a little work but I think im on to something.

Welcome and congrats.

Digging around I found this thread. I just got my aga -t2 in my vapemail today and having a hard time with it. I only have enough steel for one wick that came with it. I tossed the nichrome that it came with. I seem to have a very bad hot spot at the top post. When i burned the wick i put fluid on it 3 times and burned it like one of the videos. I am having a terrible time getting this to work. I can build a KPT coil like a champ with 1.8ohm every time. The center post is getting hot on me too. It is only getting the top coil to turn red and between the post and wick. I will try to play with it a little more. I cannot wait till I try some 100vg juice from medic in it when it arrives. Hope this was a good investment instead of a bad one. Just need to get things figured out. BTW I am using this on my new evic so i have short protection and an ohm meter is one.

Satellite technician and firefighter.

Just bought 100ft of 28g kanthal for my new rba. Not bad for 9 bucks on ebay. My new juice from medic should be here soon. And thursday my rba will be here. Cant wait.

Thanks for all the advise. I was not using tweezers to squeeze them together. That should help. Also how often do you need to change the mesh wick? Hope not as often as my cotton which is daily.

I just converted my mom and she finally bought an ego kit. Lets hope she drops to no more analogs after 35 years of smoking. Medic supplies the juice and I will supply her with coils.

I have been trying to make a micro coil for my davide for a few days now. I have been experimenting with different number wraps and different diameter core. I have seen tutorials out there that they get around 1.8 ohm out of it. How are they doing this? Any of the coils I have done somehow end up at around 3.5-4 ohm. I have to get this figured out because when I ordered my mom her first starter kit last night she surprised me with buying me an AGA-T2 rba. I am really excited because I feel as if im not a beginner anymore. I rebuild the coil on my davide all the time now. I guess the next trick is me figuring out how to make a stainless steel wick right and not blowing out my e-vic. Any suggestions would be greatly appreciated. Thanks BTW I am using 32g kanthal A-1 annealed wire.

Sorry for a double post, but I did some experimenting this morning. I tried a 3/2 wrap and a 4/3 wrap on some coil bodies. The 3/2 gave me a 1.4 reading and the 4/3 gave me a 1.9. I think i may be in my butter zone. It still tastes a little like metal even though i torched the crap out of it before building the coil. I have the 1.4 in my evic right now running at 3.3v and it is vapor heaven. I used a cotton coil wick and flavor wick. Thinking about trying another type of coil wick. Any suggestions?

My e-vic arrived yesterday and I absolutely love it. The readout is saying my coil is like a 2.7 ohm on them. I need to rebuild to get them to the perfect 2. Just playing with it last night before bed and it is amazing. I have a davide glassomizer on the top of it and it vapes ok around 3.7 volts. I have only ever used push button ego knockoffs before. This probably opens up a entire new realm for me.

I started putting the cotton as the flavor wick itself. I have silica in the coil and the cotton on top of it. You cant make the cotton too thick because it restricts the juice flow. If it is too thin you get leakage and gurgling. You have to figure out what size works after a few tries. It is easy to change so if it is not right just swap it out. Make sure before you put the tube back over it you put a drop or two of juice on it to prime or else you will burn the cotton.

I buy juice solely from medic now, and any other parts i buy from reputable sites. I have ordered a lot from veteran vaper and vaportalk store.

I just popped on my first mod. I picked up my long wanted e-vic. I am a techie nerd so a mod with a display was a plus. It is only coming from about 20 miles from me so it should get here by saturday I hope. I could have just drove but dont have the time.

I am going to attempt my first micro coil in the morning i think. I have 32g kanthal. I am shooting for right around 2ohm. I think 8-9 wraps should do it. The way I have been measuring my coils with a multi meter with one probe in the bottom hole and touching the other to the threads. Soon I will be able to use my e-vic to test cause I just ordered it tonight. Hope the variable voltage is better than the 650 ego batteries I have been using all this time.

Yeah i was vaping on cinnamon roll and tiramisu flavor. I am going to order some fruity flavors to mix in the rotation for a while. Thanks everyone for the advise.

I have 2 bottles of the greatest juice I have ever had. When i first started vaping them it was delicious. Now for some reason i cant taste anything at all. It seems like my sense of taste is dead. I drink a ton of water which is about 10 bottles a day. I brush and use mouthwash twice a day. I just cant seem to figure this out out. I will drain a tank of one flavor then switch to the other one. I am not quite sure what is going on here. These juices have flavor like a champ, i just cant taste them for some reason. Anyone have this problem, or maybe have a solution? Thanks

I just got in my coils for my davide. I ordered 2.2 ohm and they sent me 2.5, not sure why. I needed a few extra coil bodies so i have a backup when I am rebuilding (or attempting to).