Jump to content

IMEDICx90

Vendor
  • Posts

    1,798
  • Joined

  • Last visited

  • Days Won

    17

Everything posted by IMEDICx90

  1. Well it shouldn't really hold any more juice then what the wick is capable of holding. Cotton, for example, typically is able to absorb more quickly and hold more then silica. So you would have a leakage problem if you over drip the RDA. Yes is happens when you put to much liquid in the dripper. You are overpowering the wicking capabilities and it can leak through the air holes. The beauty of rebuildables in General is you can change the build whenever you choose. The only time you HAVE to rebuild is when your wick goes bad which is common in cotton wicks (they scorch easily) or your coil pops. I have had the same coils in my trident for almost 4 months now. And still going strong. If you choose to change the flavor some people just switch juice... Some rebuild the wick..... Some do a complete tear down(wash, rebuild, rewick, reassemble, refill). Again it's personal preference Well if it dries up in an RDA or an RBA you will scorch it and burn it in half. So cotton gets changed pretty frequently since it's easy to get, easy to work with, and cheap as crap.
  2. Hey Danny... I did read the whole thread but the jabber about her husbands carto vs the t3 vs the mini pro tank and how similar color liquids were placed in them.... Has no relevance to the topic that was currently being discussed. You don't like that fact... Report my comment.
  3. Ok spydre I am usually pretty reserved and not to sound mean or rude but other then the last sentence in that paragraph.... What does any of the other crap have to do with the problems of identifying the evod over the t3?
  4. Yes while I couldn't make it an all day vape due to the cost of the liquid.... I do plan on ordering a 30ml of both of the liquids I have tried at some point and saving them for special occasions. and that is not to say there isn't other good juice out there (pluid, fadora, Johnson's creek, ec blends, zen vapor room, and of course I'm partial to my own) but these just stand head and shoulders above anything else I have tried.
  5. while it may not say it on the evod.... it most certainly does on the T3S and MT3S so there shouldnt be a problem identifying which one it is. Also the mouth piece is different on the T3S versus the Evod. The T3s has a longer mouth piece with a smaller flare. The Evod has a short mouthpiece with a wide flare almost immediately from the top of the tank.
  6. thanks guys appreciate the compliments! I was just trying to help some people figure out the differences if they didnt know!
  7. Alright while this may be odd (supplier reviewing another suppliers juice) I feel I owe it to everyone here and to the makers of this liquid a fair and honest review. I ordered the sampler pack from these guys as I couldn't place my finger on which one i wanted to try since they all sounded delicious. A few pictures of the packaging and the unboxing: They sent a list of what you should taste and the names of each of the flavors so as you move your way through the sampler pack you dont get lost in the shuffle: on the backside of that is their mission statement and how exactly they came to be, and how they plan to treat each and every bottle and customer alike: all together with the samples (5x4ml). They are in glass with droppers!!!!! alright so here it goes. 1.) Grandmaster: It is supposed to be a peanut butter and banana cream with a velvety caramel undertone. I'll admit it. I'm impressed. I have not tasted a liquid (be it mine, or compenstine's, or any other supplier) that is so flavorfull that you almost need more then a 4ml or even a 30 ml bottle to really enjoy this flavor. I have yet to find a company that I can't clone something of theirs... and I doubt i would ever be able to come close to this. I will be a repeat customer for this flavor and the aroma... smells like a bakery. Hands down one of the best liquids i have EVER tried, and i have tried and made quite a bit. 2.) Absolute Pin Look out Murdock! Here comes Five Pawns!!! This is a fantastic take on an absinthe. Its got a spice in it that is labelled as a cinnamon spice with an irish creme backing. Its absolutely fantastic! I have a feeling the more i try from this company... the worse my checkbook is gonna hurt. I would buy this flavor without question and I will highly recommend you get a sampler pack with this in it yourself!!!!! Again this is all in my trident dripper running at around .6 ohm with a dual dragon coil build of .7mm flat ribbon. KUDOS TO FIVE PAWNS!!!!! I will update as I move through the other 4 flavors
  8. 2mm yarn would be the diameter of the entire piece not the strands.
  9. spydre that post is more appropriate for the BB review thread..... and brian yes usually but some you can get in a thicker or thinner version. And that plan seems pretty solid, i would work it that way as well but if you can get 2mm yarn you can just toss one piece of it in there and it will close the gap just fine
  10. you might have to pull out a few strands of the yarn B depending on the size she grabs!
  11. IMEDICx90

    RBA

    bam! your wish is granted 3rutez check it!
  12. As most of you probably already know there are a ton of option in the vaping world. There are little ego batteries all the way up to the e-huge mod that stacks 2 26650 batteries, and everything in between. There are also a ton of tanks, atomizers, rebuildables, cartomizers, and I'm sure there are more that I haven't mentioned and/or are being created! With that being said I see alot of questions regarding RBAs, or Rebuildable Atomizers. There is a huge variety and most are commonly mislabeled due to the loose use of this term. I'm going to try and show what the difference is between them and provide some images to help guide you in the right direction as well as the correct terminology for them. RBA- Genesis style rebuildable atomizer, has a tank and is most commonly build with SS mesh or SS rope like a Kraken or a Zenisis These are completely rebuildable top wicking systems. These have a tank that can range anywhere from 1.5ml to 7ml of capacity. Here are a few examples: The Kraken made by Vicious Ant is a new Genesis atty that is sweeping the market. With the standard dual coil deck and the AFC (airflow control/ airflow cap) its a totally new take on the genny! The Zenisis is an atty made by Zen and is definitely one of the best originals RDA- A dripping rebuildable atomizer, no tank and is usually built with a cotton wick, hemp wick, or ceramic like a Trident, Nimbus, Omega or patriot Notice on all of these they lack the tank like the RBA. They are meant for dripping and some use it to taste flavors, others Like myself choose this as a method of vaping all day due to the lack of juice build up that will cause the flavors to mute. Also these typically have multiple posts allowing for multiple coil builds. Trident Nimbus Omega Patriot RTA- Rebuildable tank atomizer, a rebuildable that is used in a tank such as the Diver or the Grail This type of rebuildable atty acts alot like the cartomizers in DCT's tanks. They can be used alone or with a tank. They feature a ceramic cup and use Resistance and Non Resistance wire. Diver Scuba Tank Diver in a Scuba Tank Grail BFRBA- Bottom Fed Rebuildable atomizer, a rebuildable that has a juice flow control and air control (typically) such as a Kayfun or an Ithaka These also use ceramic cups and R/NR wire. However there is an exception with the Kayfun where its more like an RDA with a tank on top of it. These feed much like a Kanger Protank or an Aspire BDC, and like wise use a chimney to feed the vapor to the vaper. The biggest advantage to the BFRBA is it usually comes with a juice control (the chimney turns to allow more/less juice to the wicks) and AFC. Ithaka Aqua Kayfun BFRDA- This is the last category of rebuildables. These are a more specifc type of RDA. They actually can be fed through the bottom 510 connection and are used on mods like the REO. The term squonking is the act of using a BFRDA and a REO (or another type of bottle feeding mod) and you actually squeeze a juice bottle that is stored inside the mod to feed the wick of the RDA. While you could use them on another type of mod, they are seriously handicapped due to the nature of the juice being able to escape the 510 connection and leak right into the battery connection. These would include The Chalice, RM2, Fatty V3, and many others. Here are a few examples: The Chalice Fatty V3 RM2 Hopefully this helps keep the terminology straight, and when you go to invest in one you can figure out which is right for what you want! Vape on guys and gals! -MEDIC out
  13. IMEDICx90

    RBA

    thanks rutez should i do a complete rundown of these? it seems like there are more tinkerers appearing lol.
  14. IMEDICx90

    RBA

    ok here is a little rundown: RBA- Genesis style rebuildable atomizer, has a tank and is most commonly build with SS mesh or SS rope like a Kraken or a Zenisis RDA- A dripping rebuildable atomizer, no tank and is usually built with a cotton wick, hemp wick, or ceramic like a Trident, Nimbus, Omega or patriot RTA- Rebuildable tank atomizer, a rebuildable that is used in a tank such as the Diver or the Grail BFRBA- Bottom Fed Rebuildable atomizer, a rebuildable that has a juice flow control and air control (typically) such as a Kayfun or an Ithaka all are great forms of reuildables, just more of what you want out of your vape All of the examples i have listed are not all inclusive, just a small selection of personal favorites
  15. got some lemon berry cheesecake from EC Blends in the trident dripper
  16. Buttered popcorn: I just opened this bottle after I let it steep and all that. I'm a skeptic with this flavor from the start since I havent found a good one yet..... But holy damn is this fantastic on my twisted dragon coils!!!!!!!!! Omg I can't believe how close this is to the real thing!!!! It's freaking amazing!!!!!!!!! I wish I had it in a 50/50 mix with no nicotine in though because I keep making myself nic sick cause I can't put the facking thing down!
  17. With 30g? That's gonna be kinda pointless. You will have to wrap crazy low to make it worth your while. I would do micro coils with 28g instead for a 6 coil build.
  18. Keep it around 1.0-.8 before you jump whole hog into it. Make sure you get plenty of practice building the coils.
  19. I would like to see a mod of titanium with guitars engraved into it. I'm a music fanatic so even treble and bass clefs or a music staff. That would be sick....
  20. Just get a digital antenna. Then you can usually get the local channels for free and retain some sports.
  21. Lol yeah I hear ya. Got a Bagua clone in 14500 mode for $45 shipped from smoke evolution and it comes with a battery.
  22. Netflix is definitely better plus redbox has a subscription that is on par with netflix, however not as many choices, but it's updated more frequently. I prefer more choices lol.
  23. My Nzonic and my aqua showed up today. :love: I don't normally buy originals but for $80 shipped that was a hell of a deal for a genuine Nzonic. And I verified the serial number with their current listing and it is in fact real.
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines