IMEDICx90

The silver bullet is an 18650 device of which I really like. I have one and keep eyeing more of them. really really want a chrome blue one.

100% VG dual micro coils at .4 ohms. That's gonna be the way to get it and on a a dripper. You won't get that with a regular clears as they don't have the right style air holes not the ability to do a roller coaster build. But unless you know more about batteries and the correct way to do a sub ohm safely.... Stay away from it.

They aren't expensive maybe 2 or 3 dollars a piece. And they don't really affect your vape at all. You wouldn't even notice it was there sheep.

Cause you know it's hard out here for a pimp.... Just trying to get the for the rent..

Ill take your coils. and ill even up the ante.... Trade you 20ml of any flavor(s) I offer (posted in the classifieds section) just pm me your choices and your ratios and we can swap.

Yes they are different. The T3S has a smaller flange on it. It will work in the protank but the protank heads will not work in the T3S. You can sand down the flange to make them fit but it's probably just easier to use the T3S coils. I only say without a shadow of a doubt because I have both and have tried it and it doesn't work.

I forgot about the zmax rixter! Good call! I would highly recommend that one as well. A lot of the guys at the factory have them and they get beat up daily.

If you get it from fast tech expect delays. They are having issue shipping packages with lithium ion batteries.

i would say Tesla over SVD if thats the choices your going with Brain. Nothing against telescoping mods... but if its short of changing tubes on an APV.... there is some serious potential that you could overtighten things and cause dents in battery tops (wont fire because of the board in the mod), IDK.... im just hesitant with using telescoping mods in an APV. In a mechanical, it will short the battery and you will know.... it gets hot really fast. LOL... nah but seriously i have used both at a local shop and the tesla just feels sturdier. The SVD feels kinda wobbly and not very well built. Just my .02 though.

well i think it is irwink. Not necessarily by itself but seriously look at the market. All of the high end mods (minus a select few) are either cloned or being cloned. We are able to obtain these mods that realistically should work just as well as the regular one without all the ******** of buying it for $200+. I realize the market is driving these mods but really? why is it that someone can mass produce these and sell them for $20 a pop and sell tons of them.. but the "real deal" is only releasing 50 at a time? Other then a poldiac and an empire i REFUSE to pay that kind of money for a mod. I bought 2 nemesis clones... and if i have them for 3 weeks... or 3 days... and they break... im out 40 bucks... if i have a real nemesis and it breaks... im out 185+ depending on what model i buy.... i could buy 10 of these clones at the same price for 2 real ones... im not interested. All im saying is with the clones... the options are becoming available for everyone even on a limited budget. THAT my friend, is a game changer.

that spider is f*cking cool! I love that thing! where would someone obtain something like that?

will be ordering this on friday

thats a big *** mod! Love the look of it! i personally havent used one because im just not into a 26650 mod but i have heard nothing but great reviews and people that have one.... usually have at least one or two more or are planning on purchasing them.

get what mod bebop? what one are you looking at?

responded good sir. and i would be happy to offer my services of rebuilding coils. LOL me and rixter could have a new side job!

well it includes 1 ohm as well technically but yes. Its less then 1 ohm. in a standard dripper i run about .6-.8 ohms in a dual coil anything less then .8 ohms get ridiculously harsh for my taste. It produces the right amount of clouds for what i want so i dont push it.

well i myself like subohms... but i also like micro coils... i find that the 27-29 is the easiest to wrap a micro with and that i can put a few more wraps on it to increase the surface area. here is a build of 28g dual micro with metering out at a .8 ohm coil. Its 9 wraps on each coil and the coils themselves measure at about 1.6 each. thus when combined split the difference and become a .8 ohm micro coil photo-21 by IMEDICx90, on Flickr that is the coils and here they are heated up: photo-20 by IMEDICx90, on Flickr i plan on threading them with cotton as its my trident and i love cotton in a dripper. now my reason for 30g for my protanks and davide rebuilds is its easy to work with and you can get a higher resistance with fewer wraps, which is key since you have very limited space to work with inside the protank head. you could use 32 but i just dont care for 32g wire at all. I love my 28g, so much so that i bought 120' of it. That being said... its all a matter of personal preference. But then again so is everything here in this hobby.

well so far my 28 gauge wire is actually thinner then my 30 gauge wire. So it would stand to reason that the thinner the wire the lest resistance offered, so the lower the resistance the lower the gauge. That make any sense? and what do you need me to explain bebop? LOL thats a pretty broad category there sir.

Well tam you have come to the right place! I have used nichrome, flat ribbon, regular a-1 kanthal, AWG kanthal and a few others i cant seem to remember since i didnt like them. Nichrome wire it nice but its really really expensive, and its not any better then kanthal vapor production wise... but its easier to use. I however nixed the nichrome all together and decided to stick with kanthal. now between regular kanthal and flat ribbon there are a few pro's and a few cons. Kanthal PRO'S: -easy to acquire and easily used to build coils -fairly decent vapor production depending on the use -GREAT for microcoil's or nano coils CONS: -compared to flat ribbon in a standard wrap you lose vapor production -very springy -hard to keep track of sometimes when you set it down -prone to hot spots on SS mesh if your not careful about trimming or oxidizing the wire and the mesh FLAT RIBBON KANTHAL PRO: -AWESOME vapor production -Heats up quicker then kanthal in almost all scenarios -retains more heat so it will fire quicker after initial warm up then standard kanthal. -Hardly ever is there a hotspot on SS mesh do to the fact the surface area is greater and is more accepting to minor fines coming off the mesh if it isnt oxidized CONS: -harder then regular kanthal to work with -harder to fit into the posts to get it tightened down properly -NOT a good use for microcoils do to the fact that it always wants to coil underneath itself when being pressed together -not recommended by me for a brand new coil builder. As far as size tam the rule is the bigger the gauge of wire the higher the number. So for something like 30g is perfect for protank builds, you can use something higher in gauge but i wouldnt recommend it. For your vision eternity with those weird posts that clamp onto it you could use the 30g but i generally use something around 27 to 29g kanthal. If you go to Temco's site there is actually a chart for the conversion of flat ribbon to regular kanthal here is is: Thickness x Width Feet per Pound Resistance ohms/ft. @ 68°F Equivalent Round Wire Millimeters Inches AWG Ohms/ft. @ 68°F 0.4 x 0.1 0.0157 x 0.004 5618 11.4 32 13.1 0.5 x 0.1 0.0197 x 0.004 4444 9.2 31 10.6 0.6 x 0.1 0.0236 x 0.004 3690 7.68 30 8.36 0.7 x 0.1 0.0276 x 0.004 3236 6.58 29 6.55 0.8 x 0.1 0.0315 x 0.004 2809 5.76 28 5.27 0.9 x 0.1 0.0354 x 0.004 2481 5.12 27 4.15 Thickness x Width Spool Increment Millimeters Inches 25 ft. 50 ft. 100 ft. 250 ft. 500 ft. 1000 ft. 8 oz. 1 lb. 0.4 x 0.1 0.0157 x 0.004 RW0314 RW0315 RW0316 RW0317 RW0318 RW0319 RW0320 RW0321 0.5 x 0.1 0.0197 x 0.004 RW0322 RW0323 RW0324 RW0325 RW0326 RW0327 RW0328 RW0329 0.6 x 0.1 0.0236 x 0.004 RW0330 RW0331 RW0332 RW0333 RW0334 RW0335 RW0336 RW0337 0.7 x 0.1 0.0276 x 0.004 RW0338 RW0339 RW0340 RW0341 RW0342 - RW0343 RW0344 0.8 x 0.1 0.0315 x 0.004 RW0345 RW0346 RW0347 RW0348 RW0349 - RW0350 RW0351 0.9 x 0.1 0.0354 x 0.004 RW0352 RW0353 RW0354 RW0355 RW0356 - RW0357 RW0358 hopefully that helps you a bit. is there anything im not clear on? i tried to make it short and to the point but i also didnt want to leave anything out.

Sure no problem! Follow tam everyone! New thread time!!! And story time too if your good.

Aqua you buy the silica and pay for postage and ill do it. I wouldn't mind just rebuilding heads. I have rebuilt close to 80 for myself so if you have 10 or 20 ill be glad to help.

Well mine is in the Hong Kong black hole as well. And one thing some people fail to realize... The local or state side dealers are going to start running dry if this continues. They purchase the stuff from china and then we buy it from them. If they can't get orders through either... It doesn't matter how many we place with them, there will just be no product to sell. So I'm hoping the lifts soon and packages will be moving along here shortly.

I'm easy 6ml a day. But I'm anywhere from 2mg to 6mg of nicotine so it's not too terribly expensive. Lol.

I use ribbon wire tam. What would you like to know.

That's just what they have been saying on other forums. I don't know the real specifics on it and since they only have 250 spoken for you really think they would hit 500 in 5 days?