IMEDICx90

Well..... It will be 3 full weeks of steeping tomorrow... So I'll let you know when I load it into a dropper.

Well irwink is right. Other the the assembly and disassembly of the two pieces being night and day it's the same general idea. You will need kanthan wire and either silica wick, ekowoo,l cotton embroidery floss, or regular old cotton balls as you need a wick for your coil. YouTube pbusardo and watch his videos on how to wrap a coil. Also get an ohms meter and/multi meter because you should ALWAYS check the resistance of the coil.

An accountant most likely.

Yes. The ability to build it to what you want and adjusting everything about the is the advantage.

An Rba is a Rebuildable atomizer... That's the wording for the acronym. An rda is a Rebuildable dripping atomizer. Basically both can be rebuilt and use the same methods only the Rba's are usually tanks I.e. Ithaca, cobra, rsst, aga etc. Most of them are genesis style which would be any of the other previously listed ones minus the Ithaca and fogger. You use an rda for dripping. Now where you are getting confused is probably lack of terminology being used in the situation. An atomizer at the core of its definition is the heating element in an e-cig. So the "coil" as we like to call it is an atomizer. A 510 dripping atomizer is strictly for that, dripping. But really they are all atomizers... Just not all Rebuildable. Is that any better?

Hence organic..... He knows he can get it at Walgreens right? Or cvs.... Or eBay.... Or just buy ekowool.... Same **** just braided.

No about once every month or so unless your a wick freak and Reroll them all the time lol.

signed

are you making sure the micro coils are being pushed together? the individual coils have to be touching each other. Also using a thicker kanthal will help. I prefer 28g myself but i also run lower ohms around .6-1.2 depending on the device. Anyway.... If you use a 30g kanthal and when your wrapping make sure your coils are touching each other... then you want to heat them up with a torch and use a pair of tweezers or pliers and actually squeeze them together as tight as you can with out overlapping the coils. also when you squeeze the coil make sure its got the red hot glow so the wires "stick" together, as it helps them stay in a tighter grouping

my giants are absolutely blowing this like a cheap *****! 0-4?!?! like wtf coughlin?!?!?!?!?

organic cotton would be organic cotton balls or organic rolled cotton. they sell it in the first aid section at walgreens or CVS. Basically the only difference is it guarantees that it wont transfer smells just because it is sitting on a shelf. It usually comes in a sealed container like q-tips.

SOOOO i fell asleep and didnt even post a review last night! LOL well i ordered it in 20/80 with 6mg nic and i bought a 125ml bottle because 35 isnt a bad price for it. I love the vanilla bean and strawberry with the dragonfruit.... this may be my perfect dragon fruit vape that i have been searching for. The dragon fruit is very nice in with stawberry and like brian i detected a small bit of kiwi and lime in this juice. wouldnt be too bad with a few drops of menthol just to give it a cooling agent either.

ah so you stock nicvape is that it? nice plug for the company there e-clouds.... btw i have no issue with a company that runs and distributes the flavors like that. None at all. The downfall.... you will always have batched juice. I want fresh juice. I dont want it sitting around for weeks before i buy it, which is why i refuse to buy from a B&M that doesnt mix to order, or an online company. So, personally, IDGAF if the guy is sitting at a counter/table/window sill and mixing my juice or if he is in a huge 5000 sqft. clean room. Either way, I HIGHLY DOUBT THAT THE PEOPLE MAKING THE JUICE ARE DOING ANYTHING BUT TRYING TO BE AS SANITARY AS POSSIBLE. i know green man e-juice mixes his stuff to order... and i love his liquid... and i will continue to buy it, so if its your personal preference that the company be a CERTIFIED AEMSA company then by all means what ever floats your boat, you clock tock, or whatever analogy you prefer. BUT it certainly doesnt make it FACT that you have to have a clean room to be sanitary nor to provide good juice.

While it's a good practice to let it rest.... There has been no conclusive evidence that it is a bad idea or a good idea one way or the other. It would stand to reason that if you put a bunch of energy into something you should let it rest and stabilize but that could also be personal preference.

its like adding a circuit board to a mechanical. http://altsmoke.com/accessories/kick/kick-by-evolv.html thats what dragongunner has. basically its takes a mechanical device which has no regulatory features to it and makes it VW.

You want a good vanilla.... Check out Johnson's creek. I love the vanda. I am actually gonna fill my ithaka with that since I rebuilt it this morning.

the whole point of the kick is to make a mechanical device into a regulated device. That being said you dont ever have to turn the kick down or up unless its a personal preferance i.e. a different juice tastes better at 7 watts, or you want a cooler vape to preserve battery life, etc. So you should be fine with a fresh battery as long as you let it sit for a 1/2 hour before putting it in the device. Some will say 1 hour but i havent noticed any difference in the times... just dont toss it from the charger to the mod, as that can be bad since its been recharging for probably a fairly long time.

Well your right and I buy regular bottles to mix my customers stuff in (don't worry guys it's mustard bottles cause I like yellow better then red;)). And can I pose another scenario to you? Places like cold stone creamery and chipotle or Baja Fresh or even subway all have open buffet style lines where they "build" or mix if you will your order and people are in and out all day long. How is that any less sanitary? I mean as long as the company is continuously wiping down the counter or table they are mixing on and are using gloves and disposable pipettes or syringes (that would probably be quite expensive) and they weren't mixing the pipettes and syringes in multiple flavoring or nicotine bottles, I still don't see anything wrong with that. I would be more worried about someone who wouldn't let me see the area. I agree with not allowing them to put their grubby fingers on everything, as THAT would be a blatant disregard for anything sanitary, but I still don't see how that is a bad thing as long as the "appearance of sanitation" is present. The water bucket they have in most fast food places that they use to wipe down the counters are nothing more then a bleach powder and warm water. While not guaranteed to be completely sanitary, it still makes you feel good seeing them wipe the counters down just before they make a slew of food. Maybe we need to agree to disagree but I don't see your point as far as the juice mixing station being visible or not.

You mean they emptied out ketchup bottles? Or they got empty ketchup bottles? I know they can be purchased and while if it was empty to start with... That's not a terrible idea. Makes it's pretty easy to transfer Vg and pg while still using a larger bottle for wholesale mixes. If it was a filled bottle that had been washed out/ sterilized I don't see why that's an issue either. If it was just a bottle they rinsed... Ok I'll give you that. Can you give any insight into that?

I started with a V-Cignature (mall store rebranded eGo 650mAh) battery and a CE5 clearo. I never tried to do anything with it other then replace the coils... until i bought the eVic

spydre you can do it for either one. it just is replacing the glass portion of either tank.

Not to make a plug for myself.... But I make and sell the juices over in the classifieds section. Pretty cheap and good flavor based on the reviews. if your ever in need of some good juice cheap let me know.

Yes I own one. It's worth the money.

You can get both styles of units fairly cheap. I think my igo w cost me $15 And my aga cost me $20. welcome to the dark side aqua!!!!' Also you can rebuild your protank coils... That would be a GREAT way to start.

I'll give you the same advice I was given. Either start with a genesis tank or a dripper. The hybrids while convenient and kills two birds with one stone, can have outside issues that you may not be used to and the curve of rebuilding is steep enough. I personally think a dripper is the easiest way to start because there are no extra parts. It's simply just a few posts and a coil. A tank could leak, you have SS mesh that you have to learn how you wrap on, it's just a different learning curve but it was definitely frustrating to me. So you are more then welcome to grab the hybrid and see if it works but I would recommend an RDA or something like a dripper. The vision eternity is nice but there is a cheaper version called the Venus that is sold on vape dudes. I have one and I love this little bugger. Plus it's easier to rebuild since it's just little posts that go on the ends of the coil.