VAPERMAN

Found this a while ago on a forum. Very easy to reference when you want your ohms as exact as possible. This shows your ohms per inch of different gauge wires. Enjoy Kanthal Grade ------ A-1 ------ A -------- D -------- Nichrome60 --- Nichrome80 -- Dia.in --- Dia.mm 28 awg (ohm/in) --- 0.4563 --- 0.4360 --- 0.4250 --- 0.3520 ---28--- 0.3390 ------ 0.0126 -- 0.3211 -- 28 29 awg (ohm/in) --- 0.5754 --- 0.5497 --- 0.5359 --- 0.4439 ---29--- 0.4274 ------ 0.0113 -- 0.2859 -- 29 30 awg (ohm/in) --- 0.7255 --- 0.6932 --- 0.6758 --- 0.5597 ---30--- 0.5390 ------ 0.0100 -- 0.2546 -- 30 31 awg (ohm/in) --- 0.9149 --- 0.8741 --- 0.8522 --- 0.7058 ---31--- 0.6796 ------ 0.0089 -- 0.2268 -- 31 32 awg (ohm/in) --- 1.1537 --- 1.1022 --- 1.0745 --- 0.8900 ---32--- 0.8570 ------ 0.0080 -- 0.2019 -- 32 33 awg (ohm/in) --- 1.4547 --- 1.3899 --- 1.3550 --- 1.1222 ---33--- 1.0807 ------ 0.0071 -- 0.1798 -- 33 34 awg (ohm/in) --- 1.8344 --- 1.7526 --- 1.7086 --- 1.4151 ---34--- 1.3627 ------ 0.0063 -- 0.1601 -- 34 35 awg (ohm/in) --- 2.3131 --- 2.2100 --- 2.1545 --- 1.7844 ---35--- 1.7183 ------ 0.0056 -- 0.1426 -- 35 36 awg (ohm/in) --- 2.9168 --- 2.7868 --- 2.7168 --- 2.2501 ---36--- 2.1668 ------ 0.0050 -- 0.1270 -- 36 37 awg (ohm/in) --- 3.6780 --- 3.5141 --- 3.4258 --- 2.8373 ---37--- 2.7323 ------ 0.0045 -- 0.1131 -- 37 38 awg (ohm/in) --- 4.6379 --- 4.4312 --- 4.3199 --- 3.5778 ---38--- 3.4453 ------ 0.0040 -- 0.1007 -- 38

double post

Posted this on another thread but seems useful on here too. This is a list of ohms per inch of different gauge wire. This has been a lifesaver for me trying to figure out what ohms I want to use... Kanthal Grade ------ A-1 ------ A -------- D -------- Nichrome60 --- Nichrome80 -- Dia.in --- Dia.mm 28 awg (ohm/in) --- 0.4563 --- 0.4360 --- 0.4250 --- 0.3520 ---28--- 0.3390 ------ 0.0126 -- 0.3211 -- 28 29 awg (ohm/in) --- 0.5754 --- 0.5497 --- 0.5359 --- 0.4439 ---29--- 0.4274 ------ 0.0113 -- 0.2859 -- 29 30 awg (ohm/in) --- 0.7255 --- 0.6932 --- 0.6758 --- 0.5597 ---30--- 0.5390 ------ 0.0100 -- 0.2546 -- 30 31 awg (ohm/in) --- 0.9149 --- 0.8741 --- 0.8522 --- 0.7058 ---31--- 0.6796 ------ 0.0089 -- 0.2268 -- 31 32 awg (ohm/in) --- 1.1537 --- 1.1022 --- 1.0745 --- 0.8900 ---32--- 0.8570 ------ 0.0080 -- 0.2019 -- 32 33 awg (ohm/in) --- 1.4547 --- 1.3899 --- 1.3550 --- 1.1222 ---33--- 1.0807 ------ 0.0071 -- 0.1798 -- 33 34 awg (ohm/in) --- 1.8344 --- 1.7526 --- 1.7086 --- 1.4151 ---34--- 1.3627 ------ 0.0063 -- 0.1601 -- 34 35 awg (ohm/in) --- 2.3131 --- 2.2100 --- 2.1545 --- 1.7844 ---35--- 1.7183 ------ 0.0056 -- 0.1426 -- 35 36 awg (ohm/in) --- 2.9168 --- 2.7868 --- 2.7168 --- 2.2501 ---36--- 2.1668 ------ 0.0050 -- 0.1270 -- 36 37 awg (ohm/in) --- 3.6780 --- 3.5141 --- 3.4258 --- 2.8373 ---37--- 2.7323 ------ 0.0045 -- 0.1131 -- 37 38 awg (ohm/in) --- 4.6379 --- 4.4312 --- 4.3199 --- 3.5778 ---38--- 3.4453 ------ 0.0040 -- 0.1007 -- 38

I do not remember where I originally got this information from but I use this as a way to get my ohms as close as possible. It is listed as ohms per inch of different gauge wire. Very easy to get the right ohms with this list.... Kanthal Grade ------ A-1 ------ A -------- D -------- Nichrome60 --- Nichrome80 -- Dia.in --- Dia.mm 28 awg (ohm/in) --- 0.4563 --- 0.4360 --- 0.4250 --- 0.3520 ---28--- 0.3390 ------ 0.0126 -- 0.3211 -- 28 29 awg (ohm/in) --- 0.5754 --- 0.5497 --- 0.5359 --- 0.4439 ---29--- 0.4274 ------ 0.0113 -- 0.2859 -- 29 30 awg (ohm/in) --- 0.7255 --- 0.6932 --- 0.6758 --- 0.5597 ---30--- 0.5390 ------ 0.0100 -- 0.2546 -- 30 31 awg (ohm/in) --- 0.9149 --- 0.8741 --- 0.8522 --- 0.7058 ---31--- 0.6796 ------ 0.0089 -- 0.2268 -- 31 32 awg (ohm/in) --- 1.1537 --- 1.1022 --- 1.0745 --- 0.8900 ---32--- 0.8570 ------ 0.0080 -- 0.2019 -- 32 33 awg (ohm/in) --- 1.4547 --- 1.3899 --- 1.3550 --- 1.1222 ---33--- 1.0807 ------ 0.0071 -- 0.1798 -- 33 34 awg (ohm/in) --- 1.8344 --- 1.7526 --- 1.7086 --- 1.4151 ---34--- 1.3627 ------ 0.0063 -- 0.1601 -- 34 35 awg (ohm/in) --- 2.3131 --- 2.2100 --- 2.1545 --- 1.7844 ---35--- 1.7183 ------ 0.0056 -- 0.1426 -- 35 36 awg (ohm/in) --- 2.9168 --- 2.7868 --- 2.7168 --- 2.2501 ---36--- 2.1668 ------ 0.0050 -- 0.1270 -- 36 37 awg (ohm/in) --- 3.6780 --- 3.5141 --- 3.4258 --- 2.8373 ---37--- 2.7323 ------ 0.0045 -- 0.1131 -- 37 38 awg (ohm/in) --- 4.6379 --- 4.4312 --- 4.3199 --- 3.5778 ---38--- 3.4453 ------ 0.0040 -- 0.1007 -- 38

Ordered three different juices that I have not had before on MBV and I was pretty impressed. All juices ordered were a 80/20 pg/vg ratio which I like the best for my carto tanks. Their juice is only 7.49 for a 30ml and it is top quality juice and made to order with fast shipping. I recommend that any juice you get from them you let steep for one to two weeks. The juices I got were peanut butter, 555, and Thug Juice. Peanut Butter 4/5 This was a very good juice but was a little more like roasted peanuts and not quite like a creamy peanut butter but the more it steeped the closer the flavor got. I got it with 2 flavor shots and it had a pretty good throat hit and will be reordering again. 555 5/5 This a nutty tobacco flavor and it has replaced my ry4 for a while. This juice had a strong throat hit and intense flavor. I got it with 4 extra flavor shots and I am loving this juice right now. Thug Juice 5/5 The name might be a little racist lol but the juice is delicious. It is mix of a little sweetener, watermelon, grape, and menthol. I also added 3 flavor shots. I tried it right when it arrived and did not like it that much but after letting it steep for two weeks this is my all day vape for now. I liked it so much that I ordered their 236ml which is a great price at 39.99. It has a lot flavor on the inhale with a nice menthol exhale. If you have not tried mtbakervapor I would recommend it. Not only do they have a few hundred juices you can also create your own juice with up to 5 different flavors and you pick the ratio of each flavor.

avejuice.com is finally up and running again. You cannot place any orders but you can contact them on any juice so I will see if I can finally get some more bobas bounty again....

If you do not like the ego you can get a 3.7v box mod. These units are even smaller than you think. They are not the most sturdy units but very portable, powerful, and worth the price. http://www.foxyboxmods.com sells the mod for 19.99 plus shipping but has crappy batteries with his kits. I recommend getting batteries from lighthound http://www.lighthound.com/search.asp?keyword=14500&search=GO who has the 14500 for 7.50 a piece and a charger which will run you about 20 bucks but will charge different battery sizes. Always get the aw imr batteries the orangish ones. A decent unit for at home could be a simple mod like the silver bullet which takes one 18650 and looks good with the 5/6 ml tanks on it. Besides that vamos, lavatubes along with a number of other devices are reasonably priced and all of them take either one 18650 or 2 18350. The vamo and lavatube are both variable voltage so you can run those at 5 volts safely just make sure you have around a 3ohm carto and you will be pumping out plumes of vapor. Also if your looking for a good place to get juice mt vapor baker has 30ml juice for $7.49 and is great quality and made to order. You can also design your own juice and pick your pg/vg ratio. Keep it higher on the pg if your using tanks.

Thanks fellow vapors you guys are all awesome.....

12mg to 18mg is a good strength for a normal smoker. I am sure you will end up upgrading from the njoy. A 510 ego kit is always a good kit for a beginner and their is a plethora of websites that sell great juice now. Look up ry4 it is a tobacco flavor with hints of vanilla and caramel most people really enjoy that flavor.

I think you will still like the VG juice and you will notice the obvious plumes of vapor from it and the slightly sweeter taste. The only thing is if you are using a carto tank it will take longer for the juice to soak the carto. I have always been able to get a solid throat hit off of 100% vg juice but it is a pain in tanks unless the carto has 2 or 3 holes.

Been vaping for a little over two years now and never thought to join a forum lol. I started out with an ego and shortly after that got a silver bullet. I also got a 3.7v box mod from madvapes for 20 bucks that has been working great for over a year. My other mod is a SS GGTS with UFS attachment which is an awesome piece but I might part with it soon to get some other mods. Peace Out Happy Vaping...

That post was way to much to read lol. To sum it up the government and big tobacco and medical/prescription companies all go hand and hand. Our government is ran by corporations. They make a lot more money off of people smoking cigarettes and big tobacco companies throw a lot of money their way. And when people smoke they get sick and have to go to the hospital and buy meds. Thats why they hate ecigs. Thats why they hate the idea of legalizing marijuana.

Awesome. I just might have to order one. Will these hold mods like the silver bullet, vamo ect...

avejuice.com is the original and I like it the best. The only problem is that there website is always down and it is almost impossible to place an order for the last 3 months.

http://zainy.net/26-genuine-cheapest-dekang-e-liquid-whoesale-china zainy.net ships from china and it takes a few weeks but it is pretty cheap and you choose 100% vg, 100% pg or 50/50. They also have probably over 100 flavors to choose from you just have to look at the list and select other flavors and put in the message at checkout. You can get 5 X 10 ml for $12.50, 5 X 30 ml for $20.50, 5 X 50 ml for $27.00. They also have hangsen where I get ry4 from and they have 10 X 50ml for $43.00.