joe2003

Done,done and done! Thanks again Uma for the links and your service to the community

It's just what I was hoping the V2 would be variable wattage with an ohm meter I hope it's reasonably priced when it's released and I hope it releases soon lol

PT Barnum said it all and some of the "reviewers" in this thread prove it lol

Waaay too expensive and they are uninformed or they are liars No way a carto=2packs of cigs lol

But don't forget that if the amperage limit of your Switch is too low it will limit the flow of current. Without taking that into account it will throw your numbers off

I don't own any of these but the sigeli seems to be preferred. I like your first choice of the Sid,I may get one of these soon. According to this review it does have ego cone threading and PBusardo also has reviews on your other choices.

http://www.madvapes.com/cartomizer-and-atomizer-ohm-meter.html I use madvapes for almost all my DIY mod stuff Just use their:notify me option they restock fairly regularly.

What area are you in ? I've heard that there are there are B&M's in Mobile,Dothan and Huntsville, I know that there's at least one in Decatur and Moulton. If you're close to the border there are also a couple across the line in GA.

This is just my opinion,alternate opinions or arguments are welcome (I like to learn ) I prefer to use a single boosted batt over using stacked batts,not only for safety issues but also for convenience. The best performance rated 18650's I've heard of are the Panasonic but they are pricey and sometimes hard to find. I like the AW IMR 18650's for their safer chemistry and better handling of boosted power for higher wattage vaping. They are easy to find in 2000mah rating for good long charge life but be aware that it will take ~8 hours to fully charge. There are other IMR batts available but AW has built a rep for good QC. As for chargers the PILA(sp) brand have the best rep. but again are pricey. A lot of us use the TrustFire TR-001 without issue and it has 2 independent charging channels which can charge from 16340's up to 18650's with no probs. but will safely charge only 3.7 volt styles of batts. ohms of the batt doesn't matter it will charge it correctly as long as it's the right voltage. My batts typically read 4.12- 4.19 fresh off the charger. HTH

I like these: http://vaportalk.com/marketplace/epipe-starter-kit.html http://www.thevaporgirl.com/pipe.htm#.UfQvQKx2FBM

Madvapes has them in Chrome: http://www.madvapes.com/vision-ego-spinner-400mah-variable-volt-battery-chrome.html

Thanks these look pretty good. As long as it's plastic and not glass lol. My wife likes these clearo tanks better than the cartos in tanks that I use.

Hi folks,I need some opinions please. I'm looking for a clearo that is bottom coil and has the same taste,vapor flavor etc.as the KPT. (yes the KPT I won from Brian has already hit the concrete SMH) But something with a plastic or metal tube instead of glass. We already have an EVOD but it's a bit too small and hard to tell when to stop filling.I would like something in the 2.5 -3.5ml range. Thanks for any help and opinions

And women like her always have a support group of enablers that will talk about him like he's the worst person ever and treat her like a little saint! SMH

Buncha lightweights lol I get at most 5 hrs. from a 650 twist and ~10 hrs. from my 1300 mah spinners. I go through 4-5 mls. of juice a day,sometimes more.

Why thank you Ma'am lol We should definitely meet up for chat soon!

So after winning a KPT in Brian's contest,I decided I wanted some other goodies to go in the pkg. with it Shipping was fast,I ordered Sun. and it was here Wed. The KPT is in my wife's possession but I hear it's very nice lol. I had some trouble with my new goodies so I opened a ticket to see if Brian would walk me through making it work since I couldn't figure it out. After a few e-mails and a phone call we decided it wasn't working as it should. Now we all know that when a vendor sends out a sealed pkg. they have no control over what the Mfg. puts in it,but Brian went above and beyond to make sure that I was happy with my new toy.The replacement arrived today,just 3 days after I first contacted him.Not only did I receive fast courteous service but he went the extra mile in a number of ways. Brian is definitely a White Hat kinda guy as most of us already knew even before he became a supplier.I'm happy to have even more proof of what a great person he is. Chris has developed a great forum full of awesome folks and is himself top notch. When we add in Mark,Jeffb,Birddog,Brian,Uma and many many others it's no wonder so many of us have found a home here!!!

Will have to nitpic here PG=Propylene glycol. Also if you don't already have the addiction to smoking I don't recommend E-cig use.Why put anything in your lungs if it isn't necessary. Just my .02 I believe E-cigs are dramatically safer than tobacco but why take the chance? For most of us it's better than tobacco but only as a reduced harm alternative not as a starting place for a new habit IMHO.

I'm stoked,he mentioned that the MVP will be coming out with the same features! The MVP will be the one for me,I almost pulled the trigger on the 1st MVP several times but was put off by the lack of an ohm meter and some reported probs with the charging port. Looking forward to a new PV again

On the batt side 510's are "innies" and 808's are "outies"

The red light staying on when the button is pressed is usually an indication of low charged or bad batts or of a short somewhere in the system. The short is ususally in the carto or atty attached but some times can indicate a loose connection inside the PV. The only time I experienced this was when the ground wire inside the unit got loose.Simply tightening the screw that holds the wire to the atty connector solved the issue for me. A very low ohm atty may also cause this. HTH

Gee the only thing I see is a place to report probs with the NRT's I didn't exactly have probs they were just ineffective for me. Didn't see where we were supposed to talk about how effective the E-cigs have been. So what am I overlooking ? I'm so confused again lol

But I thought you said wood working was a labor of love,Don't tell me you're prostituting yourself now J/K That really looks great and I wish I could get one but definitely would need a smaller one or I'm afraid I'd be like Uma and the gotta haves would set in. lol

I'm pretty sure the Blu is 510 threading

MWAHAHAHA!