Proetus

reload the page and try it again. had to fix the links.

With a Nimbus Clone Click for video! Click for video!

It's no problem here! Not like i spent money on em

Coax fittings do not fit 510 threads! Dam of course it couldnt be that easy for me.

Hold that thought! I'm a cable guy, let me run out to the truck and get some fittings...

It's baaaackkkkkkkk. And my DNA20 is reborn into a DNA30! Tip of the day... the original battery holder from FT won't fire at 30watts. Fires fine at 20, but not at 30! I will upgrade to keystone Battery holders soon enough. Easily enough accomplished in the future. Important part is I have a 20w mod back!

It's really not hard to do at all. As long as you follow basic safety procedures and have a good iron, you're all set. There are writeups everywhere. Honestly ECF probably has the most info pertaining to mod's. It's ridiculous how many are over there!

Perhaps i phrased it wrong, the whole point was to suggest the screen cradle. It is specifically made for the dna screen. It comes in a variety of depths to accommodate varying thickness of the enclosures.

Neither are my design. They are created by Bapgood on ECF. He makes the schematics and then www.shapeways.com makes the pieces to the schematics he comes up with. He is also the creator of the dna screen cradle. The side by side was something he worked up and requires special parts he mills, so that is likely unattainable. However the parts for the left one is going to happen in the future.

Small teaser of one of the upcoming builds..left one, not the side by side.

Didn't have much time during the week to replace the rma'd 20 with a 30, so without further ado, here we go! New screen cradle as i broke the black one getting out the 20. About 20 minutes of filing in order to get this one to fit.

Yes there is a line, already established, if/when i sell one or two

Done yet?

Any questions feel free to ask. If using a standard type aluminum enclosure you will need a screen cradle to make life easier. They are available in different depths all the way up to 5mm i believe. Just make sure you get the one with the stop. Screen Cradle

Whatever you do, be sure to use the proper gauge wire and remember battery safety. Use fuses to protect the board and yourself. If using dual batteries, be sure to put fuses on both batteries for reverse polarity protection.

Not yet!

I use more juice in an RDA then a Protank. Seems that way on every rebuldable i have. My KFL rips thru three tanks a day Minimum, its a 4.5ml tank!

Ask and ye shall receive

Wow! Great vape week! Got my Dna30 Chips, my coop batteries are shipping tonight, I got 2 Taifun Gt's floating around between here and NY and i just got my shipping notification for my Russian 91% V2! Kick ***!

1900Mah Twists are due out soon also.

Careful what you buy. Juices and Batteries will cause the whole order to be kicked back to them.

Normal twist voltages 3.3-4.8

New twist is on the horizon, in the form of a 1900mah beast! Hasn't been publicly announced as of yet tho. 123mm tall and 20mm wide. I'll see if i can't dig up a picture in the near future. Wholesale pricing looks to be around $25 per piece so i would expect $50-60 in stores.

I'll put it this way, my dna 20 has a pair of these in it -Panasonic NCR18650PF 2900mah for a total of 5800mah I generally get 4-6 hours vape time on it before it needs charged. You'll need to carry a 6 pk of batteries with you for use as a daily vape! Sure it looks nice and shiny, but it looks to fidgety for me. I can build 3-4 DNA30's for the price of this. to each their own tho.

30's are here! Probably put one together in the 20 shell tomorrow night!