Christopher

We just lowered some of the mods last night Thanks for the shout out, it's always appreciated. The Fuchai's are now 49 w/ free shipping. Even better, if it breaks, you know where to come knocking for help

That's a ridiculous tax. Especially in US made e liquids.

They don't specifically say. It's been estimated that it would be a 50% increase in overall cost. (So worst case, a $10 bottle might cost $14 for example) but it's really all speculation. All that's mentioned is a $2 per pack increased and "similar tax increase on e cigarette products"

Can we all agree this whole "public threat" thing is total ********? I'm so tired of hearing about the battle against the "threat" of e cigarettes.

The forum and a string of websites were down for the west coast last night between roughly 11pm and about 9am this morning. Amazon had some issues with AWS. It should be mostly resolved as of this post (I was having the same issues) As for the flood control, it should only pop up if you're posting less than 10 second apart, if you know you're posting further apart, let me know so I can delve into the issue a little deeper.

This is the flood control system kicking in. Are you posting less than 15 seconds apart?

Yup we've got the little bad boy up in the store (plug) https://www.vaportalk.com/us/product/mini-volt-40w/ I've got one here at the office and it's tiny but packs a nice punch

It was a long...crappy week. But finally I'm doing a lot better, thanks for asking The procedure was actually pretty easy. But I managed to get a small infection afterwards, but I'm healing up and pretty back to normal now. (I lost 6 pounds from not eating much which was pretty great)

Featured disabled, case adjourned.

All in favor say AYE lol

I also need to fix this double posting ordeal (note the double posts above lol)

I'll try to keep an eye on those. I noticed VW carries them but non of my suppliers do for some reason :/ But I'll attempt to search around I'll try to keep an eye on those. I noticed VW carries them but non of my suppliers do for some reason :/ But I'll attempt to search around

This actually drives me nuts. Often I'll reply to the product mega request thread (Reply to one person, then another, then correct a mistake) and it's glanced over. There is no way, that I can think of currently to allow it to be user controlled. What I can do though is just turn the merge feature of completely. I know more often than not, it causes more harm than good. Thoughts?

Guess I'll finally get that beach front property Guess I'll finally get that beach front property

There was actually just an earthquake warning here the other day, but the period has passed and we're good. (Still updated the go bag in case) I don't know when the big Cali quake will finally hit, but we all sorta know when it does, it's going to be a big one.

Go to the left, earthquakes, middle tornadoes, right flooding. Nowhere is safe.

I received this email as well and was planning to post it this evening. I'm going to pin this topic.

No I believe they are made of plastic. Usually Ming style tips will help a little with spit back (due to their shape) but I'm wondering why you're getting so much spit back in the first place, is your tank flooded? (I find that when I get spit back, it's because my tank has become flooded)

yea I've got a few clients out that way and they've all closed shop and boarded up the windows. Hopefully it doesn't hit too hard.

Woo Hoo You're welcome

I thought this might be useful as I had to use it today Wire cross sectional area calculation The n gauge wire's cross sercional area An in square millimeters (mm2) is equal to pi divided by 4 times the square wire diameter d in millimeters (mm): An (mm2) = (π/4)×dn2 SWG to mm conversion chart SWG # Diameter (mm) Area (mm2) 7/0 12.700 126.6769 6/0 11.786 109.0921 5/0 10.973 94.5638 4/0 10.160 81.0732 3/0 9.449 70.1202 2/0 8.839 61.3643 0 8.230 53.1921 1 7.620 45.6037 2 7.010 38.5989 3 6.401 32.1780 4 5.893 27.2730 5 5.385 22.7735 6 4.877 18.6793 7 4.470 15.6958 8 4.064 12.9717 9 3.658 10.5071 10 3.251 8.3019 11 2.946 6.8183 12 2.642 5.4805 13 2.337 4.2888 14 2.032 3.2429 15 1.829 2.6268 16 1.626 2.0755 17 1.422 1.5890 18 1.219 1.1675 19 1.016 0.8107 20 0.914 0.6567 21 0.813 0.5189 22 0.711 0.3973 23 0.610 0.2919 24 0.559 0.2452 25 0.5080 0.2027 26 0.4572 0.1642 27 0.4166 0.1363 28 0.3759 0.1110 29 0.3454 0.0937 30 0.3150 0.0779 31 0.2946 0.0682 32 0.2743 0.0591 33 0.2540 0.0507 34 0.2337 0.0429 35 0.2134 0.0358 36 0.1930 0.0293 37 0.1727 0.0234 38 0.1524 0.0182 39 0.1321 0.0137 40 0.1219 0.0117 41 0.1118 0.0098 42 0.1016 0.0081 43 0.0914 0.0066 44 0.0813 0.0052 45 0.0711 0.0040 46 0.0610 0.0029 47 0.0508 0.0020 48 0.0406 0.0013 49 0.0305 0.0007 50 0.0254 0.0005

I thought this might be useful as I had to use it today Wire cross sectional area calculation The n gauge wire's cross sercional area An in square millimeters (mm2) is equal to pi divided by 4 times the square wire diameter d in millimeters (mm): An (mm2) = (π/4)×dn2 SWG to mm conversion chart SWG # Diameter (mm) Area (mm2) 7/0 12.700 126.6769 6/0 11.786 109.0921 5/0 10.973 94.5638 4/0 10.160 81.0732 3/0 9.449 70.1202 2/0 8.839 61.3643 0 8.230 53.1921 1 7.620 45.6037 2 7.010 38.5989 3 6.401 32.1780 4 5.893 27.2730 5 5.385 22.7735 6 4.877 18.6793 7 4.470 15.6958 8 4.064 12.9717 9 3.658 10.5071 10 3.251 8.3019 11 2.946 6.8183 12 2.642 5.4805 13 2.337 4.2888 14 2.032 3.2429 15 1.829 2.6268 16 1.626 2.0755 17 1.422 1.5890 18 1.219 1.1675 19 1.016 0.8107 20 0.914 0.6567 21 0.813 0.5189 22 0.711 0.3973 23 0.610 0.2919 24 0.559 0.2452 25 0.5080 0.2027 26 0.4572 0.1642 27 0.4166 0.1363 28 0.3759 0.1110 29 0.3454 0.0937 30 0.3150 0.0779 31 0.2946 0.0682 32 0.2743 0.0591 33 0.2540 0.0507 34 0.2337 0.0429 35 0.2134 0.0358 36 0.1930 0.0293 37 0.1727 0.0234 38 0.1524 0.0182 39 0.1321 0.0137 40 0.1219 0.0117 41 0.1118 0.0098 42 0.1016 0.0081 43 0.0914 0.0066 44 0.0813 0.0052 45 0.0711 0.0040 46 0.0610 0.0029 47 0.0508 0.0020 48 0.0406 0.0013 49 0.0305 0.0007 50 0.0254 0.0005

Hey Thanks Smacksy. The dentist actually called me back in today and finally I was given some pain meds. First time on these, they're actually pretty freakin great! Hey Thanks Smacksy. The dentist actually called me back in today and finally I was given some pain meds. First time on these, they're actually pretty freakin great!

We can finally see the power bill drop. It was actually pretty good weather outside the last couple of days. Could finally crack the windows for once and get that fresh riverside air.

Pretty much! And thanks. You know in all honesty the wisdom teeth part went ok, hell even those don't hurt that bad. But I developed two canker sores that are the bane of my existence at the moment. I'm ready to cut out my tongue at this point. I think I've tried everything short of a witch doctor. lol the GIFS these days crack me up