Uma

Another cool place epipemods for the wild wood sculptured ones, search for Geppetto mods. Wow.

I'm pretty sure it's a set. He is making hybrids that look like one piece, but they are interchangeable unlike most hybrids that are one solid piece. His next set will be the 18mm, can't wait! I love a good coil!! It's fun to shout it to the ears that happily relate to them. My last coil sounds better than a great boge when fired up and crackling. Vapes and tastes better too. (doh lol). I jump for joy for us both!!

I've been yelled at for rolling the window down. "What are you doing??!! We love the smell of that flavor, roll it back up PLEASE!!! and there are other flavors where they roll the window down to get extra air. I always crack the window, out of habit, and let them dictate whether or not to roll it down more or to close it. I don't mind letting them choose for me. They choose my vaping over my smoking... and sometimes the choose my vaping over my not vaping. Gotta love it.

Awesome!! That threw me for a tizzy, but then, I'm easy to throw. Jim just announced his Hybrid model. OMG!! It's stunning!!!! For those nights out on the town, with class and style. He'll be producing a big one too, for those days out at the football game.

Great tip, Jdog! I've got it bookmarked. I still have a few tanks sitting around that could use a better carto setup inside. The eGo Twist still goes out and about with me, it's discreet and it won't matter if it gets lost cuz it's easily replaceable. These might come in handy.

Yeh, some juices seem to gunk quicker than others. Also, some Volts or OHMS with certain juices will gunk quicker than others. It's russian roulette out there in atty land. Some vapers like to take the wick out every day, dry burn the coils, brush the wick off with a soft toothbrush, and they're good to go. Doing that helps to keep the flavors purer. I always intend on doing that routine... but by the time I do do it, it's so gunked up that I can't remove my wick without destroying the coils. BUT, I am getting better about it. This time wasn't so bad that I couldn't reuse the wire. So yeh, it's better to develop a cleaning routine with these, just like we used to do with our storebought attys, only different. It really helps to keep the flavor pure, like I mentioned. You are lucky!! Those are quite coveted. I did remember right that you had one, but wasn't positive I remembered right, so therefore had to ask. The new ones fit like a glove, from what I understand. Slant top for the one, and flat top for the other. I never remember which one the Mini goes with. There's a lot of beautiful pics on the various forums of the gorgeous combos, so I was quite taken by surprise that yours didn't quite fit. I didn't know the older models were different sized. Learn something newer every day! Rest assured though, that if you decide to go with a new version, it will fit stunningly. Oh gosh, I still love my Roller mod as much today as I did the day I got it. It's perfect for me in sizes and weights, plus it's nice being able to change out sizes to fit my needs at any time. Even the 18650 mode is comfy and smallish. In 18650 mode my LavaTube, without an atty, comes clear up to my MiniDiD's upper Knurl ring when it's on the Roller. It's much smaller & lighter than the Silver Bullet too. I haven't had one problem with it, yet because a few purchasers had 3 seperate problems, they're sending all us previous purchasers an update/upgrade. They figure that if a few people need it now, then we'll all be needing it sometime in the future, so why not just fix us all now while they're about it. I think this company is going to grow and grow! I hope they do! I know I'm going back for a backup mod when I can. I would hate to lose my Roller, just absolutely hate it if I lost it. It's a keeper and a half.

You sure got my number, I love a good purple! Give your hubby a big ol' hug from me. Tell him I said he rocks! That is just the sweetest ever. I'm surprised the P+ is too little for the MiniDiD. Is yours one of the older (yet just as beautiful) models? Jim, the DID guy at MMVapors that used to be e-vape.gr, is creating a mod that will look hybrid with his DID's. He's also going to create a Fat DID for the bigger mods out there. We're stoked, The Atmizoo team says they're in final production and testing of the 3 upgrades and they are almost ready to send out to the previous owners. They got held up a little longer, the typical scenario of any business venture, having to wait on the machinist or his machines to get fixed or whatever, but they are back on schedule. Today my MDID went dead, and it's no wonder, what with all the gunk built up around the coils. I was in a hurry, so I just unwrapped the coil, wiped the wick with a paper towel to remove the excess black stuff, and paper towel swiped the wire. Then I recoiled the same wire but with one less wrap, and .... wow! Next time I won't waste any time getting that small chore done. It only took about 10 minutes. I'm almost feeling like an old pro with this gadget now. And the funny thing is, the OHM readout was the same 2.4 as before. I'll never understand this all, but I don't care as long as it works. I now have a Multi-meter to read the mesh after it's been oxidized and I also have a volt-meter to read the ohms while I'm wrapping. It's also a handy little base for holding the atty while I work hands free.

OMG! That would have been hilarious to watch. I can just see you doing that too!! LOL LOL, loved that one! Oh! and that tall guy with his eyes bugging out of their sockets!

In that case, I'll go ahead and purchase some. The way you describe it, sounds like it will be a good one for me too. You were surprised with the Bolt?? How cool is that!! I'm so happy for you!!!

LOL you two! But I must admit, I'd be just like that one girl who is trying to climb back inside of Mama.

Lovely, stunning, photo! Love the colors and patterns. How are you liking the ceramic dt?

Hiarious photos of people getting the crap scared out of them http://www.mandatory.com/2012/09/18/hilarious-photos-of-people-getting-the-crap-scared-out-of-them#photo=1

Welcome back, Light, and a huge Congrats on your 2yr annivapesary!!! Vape on! Best of luck with your new world and career. You are gutsy!!

Manos said it won't be long. They are testing the improved parts and will ship to the previous purchasers and then put the new improved mods on the shelf for future purchasers. Yours will be rockin with a flush top cap. (they're sinking the connection so the tank rigs will look hybridish). Wow!!! Not one exclamation point!!!!

The beauty of vaping is being able to cut back or cut down on your nicotine intake as needed or as wanted. Another beautiful aspect is that we are not breathing in the "vapor" as we hold the pv in between puffs. Between just those two aspects, we are at a lower level of intake than analogs. When we're active, we vape less often. When we're at the pc, we chain vape. The only difference, is we can now comfortably chain vape at the pc in the buillding, whereas before, with analogs, we had to take the laptop out to the porch or garage. But we did. Plus we breathed in all the second hand and burning end of those analogs as well. All in all, it's a lot less. On top of that, with the analog, we could and would smoke it down to the filter in 3 minutes. About 12 puffs in 3 minutes! Every 15 minutes or so. Wow. That really adds up, especially with all the non-action smoking combined into that figure as well. With vaping, we take longer and fewer draws in that 3 minute session, plus the 2nd hand evaporated into thin air and there is no burning end to breathe in as well. Personally, I vape about 1-2 draws every 5-10 minutes, depending on if I'm catching up from not vaping, getting a decent puff, or tense. Long story short, even though it seems like we're constantly vaping, it adds up to less actual puffing than smoking did. If we can only vape for 10 minutes every 2 hours, we just switch our workhorse pv over to a higher nic level to satisfy the cravings while we're at work. When we're at home, vaping however/whenever we want, we get by with 0-12mg of nic without duress. We can totally adjust our levels to fit our own needs on any given day. With analogs, if we oversmoke today due to stressful situation, then tomorrow it's all we can do to not light up. With vaping, it's just the opposite! With vaping, we just set our rigs back to our good old 0mg or 12mg or 24mg or 6mg or whatever level we were most comfortable with before the mailman bit our dog incident. Try personalizing an analog lol. I increased my smoking to 2 packs a day from one when I switched over to light cigs. Just the opposite with vaping. With vaping I switched over from 2+ packs a day to 0 cigs a day when switching down from 24mg to 12mg over the course of time. With Vaping, our nic levels go down as we reduce our nic levels. With smoking, our nic levels go up as we decrease our nic levels because we smoke more to get our fix. Vape on!

Altcig.com is having another great 25% off sale so I bought 70ml of their Irish Cream (to die for good!!!), 70ml of Caramel Cappuchino (excellent flavor and light color), and a few others that I haven't tried before. Also incoming is a Multi-meter from Amazon.

Oh how fun!!! I wish there were a lounge in my area.

There's another 40 dollar one coming on the market soon, that is a true mutt. It's SS, which is nice, but still need to research the type of SS they used, and it is inspired by many of the popular attys already out on the market, such as the DID, the Line and the Hellfire. They're selling it as beginners Rebuildable Atomizer, and will be sent pre-set up and ready to vape. I don't know if it's going to be a nice one or not, but at least they didn't outright steal someone elses hard work. (Making the Prototypes alone can cost over 3000 bucks, it takes a LOT of re-doing to get the product just right, like Jim the DIDman did only to have the foreign country snag it and copy it close enough to call it a DID copy... but ... it's not a clone, they didn't quite capture everything correctly, especially not the sizes of everything that has sizes, ... oops, sorry, I'm ranting). Anyway, so yes, they stole the concepts from others, but it looks like they made it their own at least, and for 40 bucks, it might be worth a shout out for those who want to try one. I'm not endorsing!!! I don't even have one to compare or judge, I'm not condoning either.... yet, at this point anyway. I'll know more in a few weeks. If you're interested, it's called the SS Maximus pro Maybe I can have a Moderator change the title of thread to Genesis instead of DID. (the people who requested pics never showed yet anyway lol).

Congrats on your new Mini Pro!!! I've been tempted to get one, but that menu... I *know* as soon as I purchase one they'll *finally* come out with a new improved menu plus VW to boot. grrrr. So, I hold off... stubbornly. But then, Christmas *is* coming up soon...

I have no idea, and they're not saying. If it were top-notch 304 kitchen grade SS like the Bliss or Zen, they would be shouting it from the rooftops... so I would assume, especially at that price, that it's another Plated brass copy. It might even be a Phoenix?? I don't know. Might be great for learning curves, and emergency stockpile, for hiking and boating trips, but I wouldn't want to use it every day, due to the questionable materials. and no, it's not the DID

Good post JDog! I haven't put mine down either, except long enough to clean it whenever the flavor dulls. (empty the tank with syringe, gently twist up and out the wick, dry burn the coils with pulsating action, reTorch the wick, reSeason the wick, rePlace the wick). As long as we also stock up on all the replaceable parts (mesh, wire, center post and nuts, insulator thingies, o-rings,) then we'll be vaping in peace while the rest of the world does in war dance. Priceless.

There are no stupid questions! We're all here to learn more. BluCavvy is correct, the DID is a Genesis Style Re-buildable Atomizer. It is the first one to be affordable and available in a store. Up until lately we had to join forums and threads to get one, and at much higher cost. The forum lists were long and tedious as well. Today there are many genesis style available, but only a few are sold in online stores. (DiD, Cobra, Spheroid..) Here is a video by Igetcha69 that should help to describe what it is.

Very very nice!!! Nice wrap, beautiful rockin' P+. Looking forward to the better pics so I can drool in all it's glory, but these are nice enough to tickle a fancy! Thanks for sharing.

. OMG!!!! I can't believe I forgot to mention this, but it's also a Lockable button!!! At first I didn't use it, but now it's old hat and it's easy to use, even with just one hand... once you practice of course. OHHH!!! and the button is so comfy, that it's almost or actually really is, as nice as pushing a keyboard key. It's so worth saving the pennies for. I'm going to save up after Christmas is over and done with and buy me a backup one. I would fall apart if I lost this one, and not just because of the specialness of it either, but because it's just so dang p e r f e c t in weight and sizes. (for me)

You're welcome. It's a nice start for you. haha, Poppa, yes all of them have their quirks, p.i.a. scenarios, yet all of them are worth it in the end. Once mastered, they will be with us forever,... just buy a spool of wire and vape away, come hello or higho water. Priceless.