Here is my new pipe project. It will have a 18350 battery you can take out when it runs down and put a fresh charged one in. Also it will have a 12 watt adjustable power regulator. It features controlled power from 5 to 12 watts with a 510 auto switch. This pipe is freehand out of spanish briar block. A lot of hours carving & sanding. Hope you like it. Stylish E Pipes "Vaping with Style"
Hello everyone.
I turn wood on a lathe for a hobby. I normally make things like pens, pepper mills, bottle stoppers and goblets. I decided to put wood around a Riva 510 battery tube to see how it would turn out.
I dissembled the riva down to just the tube. I glued a piece of brown ebony around the tube. Then I turned it down and sanded it to 1200 grit. Next I applied 10 coats of CA glue(crazy glue) as a finish. The finish was also sanded to 1200 grit and buffed with white diamond. It took ~3hours from start to finish.
About a week ago I bought a E-power 14650 to test and see how good they work. The newer buttons seem to function fine and I have not had any issues yet. My next project will be to turn the tube on the E-power. The tube on the E-power unscrews from the switch so when the battery dies it will be much easier for me to change compared to my riva.
