Schizophretard

The higher the ohms the more resistance and heat, right? I've been vaping my Joker but I'm getting tired of juice leaking down so, a cone is a must. Also, the cone makes the drags feel more like an analog to me. With all my other units it feels like the air just goes through it too easy. I noticed that my eGo produced more vapor than all my other units because of the cone. Last night I put one of my old nhaler LR 510s on my eGo and it is performing much better than my Joker or other units. I think I'm just getting tired of all these mods that look like crack pipes. I was at a cousin's house recently vaping outside. The neighbor gave me a dirty look and brought all his kids that were playing outside into his house because of me. It made me uncomfortable. The eGo is just so much better to me than all the other units. Unless they make a 5 or 6 volt eGo, I think I'm going to stick with a LR atty on the eGo with a T-tip. Anyway, what do you know about the different ohms? Is there a thread or a chart that shows/explains the specifications of all the LR atties? Thanks.

Does the adapter make it stick out of the cone more?

That sounds kind of ridiculous to me. Besides smoking does a lot more than ammonia. I do know from personal experience that PG and H1N1 don't mix well.

It's going. I knew of other sites but I have been so satisfied with wordup that I stick with it and therefore it is all I can recommend.

That's probably because 510s run hotter than 901s normally.

Thanks. Why do you prefer LR 901?

Thanks. I have every adapter already. What makes those better than the 510 ones? Can you put on the eGo cone with it on?

I just did 10 6-8 second drags one after the other. I'm starting to OD so, I'm going to stop counting. I would say at least 10 and maybe drip at 20-25. If you're using the eGo just drip when you notice a change because the cone keeps it from leaking all over the place and some of the juice gets sucked back in anyway. Just keep that baby wet no matter what unit you're using. You're welcome.

Not sure. I'm a nicofiend and I vape 48mg constantly. I also vape about 6 seconds. I'll drip ,then count, and get right back to you. Cool?

How's the burnt metallic taste?

When the atty burns out that it when the three bears come home to eat you. Avoid that! If it starts making gurgling sounds you can stop dripping because it is about to flood. Vape right away so it won't flood. I usually drip 3 drops every 5-10 minutes. When you first start when you wake up do 5 drops and the rest of the day 3.

Are the gold band ones from Janty the same thing? Those look nice! Other than the LR on them they look like a Dura.

Vaping it dry is bad but it is also bad to drip too much. Dripping too much is less bad because all it can do is flood it. If it is too dry it can burn it out. If the flavor gets bad or a more than normal amount of vapor is being produced then drip. Always drip if you sat it down for awhile. Since it is better to flood an atty than kill it the best method to try is to flood it. That way you can figure out how much juice it can handle. Try to keep it as wet as it can be without flooding it. That is the goldilocks zone. When you first start vaping it is trial and error. In about a month or so you will know when to drip without thinking about it. Don't leave a space between the atty and batt but don't tighten a lug nut either. Tighten it on as if it is the eGo cone.

I see. You guys didn't like how they handled the Joker?

An atty is only broke if it doesn't work at all. They can weaken though. It is best to blow out an atty every night from the threaded end and stand it up on the cart end on tp while sleeping to drain what you didn't blow out. The juice can dry weakening the atty faster when it isn't in use like at bed time. If you have problems during use sometimes it helps to just blow out the juice from the threaded end and then rejuice. Just tighten the atty until it is flush. Any force is excessive. Whenever you take off the atty wipe off the juice on both connections before putting it back on.

That is a choice I never saw coming. I must have missed a lot and I'm trying to catch up. It looks like a lot has changed on here. I feel like a noob again. Are you able to share what led to that decision? It is good hearing from you. How have you been?

You can get VG from Wordupecig.com. You can get a 50/50 mix or pure VG. I buy a 50/50 mix from them and like it. Here is the link to the juice page.

I noticed Vaprlife isn't on here and the forum doesn't carry their products anymore. What's the story?

LR atties were first sold from Nhaler and I bought a bunch back then. I used them on my eGo. I haven't been here on the forums for months and have noticed others have them now. They seemed to always have that taste and that was a big problem with them months ago. I'm curious if other companies have improved on them and the differences between the different brands besides the burnt metallic taste. I've been using the Joker since it came out and have been thinking about going back to my LR 510/eGo set up. I noticed Janty has came out with new toys for the eGo and I would like to find the best LR 510 for it. What have you heard about the Joye/Janty one?

Who makes the best LR 510 atty? Do all of them have the burnt metallic taste?

So, you had to act like both your VP2s were broke? How did you break them? Did you send them to Jeso for repairs? Do the cartos vape consistently?

I don't know but if a meteor like the one in that video hit your house then you should probably be more worried about your health and life insurance.

You think that is scary. Check this out! Watch all of it because it shows from different cameras. It looks like a nuke!Huge Meteor Explosion

Sorry about the roof and I'm glad you're okay. That must of been an awesome sight! Did anyone save some hail or take a picture?

It was wonderful wasn't it? We are looking for that first hit and we will never find it.