Tam

And... with the troubleshooting from @Adversarious1 and @Earthling789, you can up your wattage to help vaporize the juice from coming into your mouth, or you could always get a longer drip tip or a drip tip with a screen on it to lessen the amount of eliquid that gets into your mouth.

And for the mod with the internal battery: Eleaf iPower 80W

Also, when you changed the coil, did you also rinse out your tank and fill with new juice? If you burnt the wick on the old coil, chances are good that the juice caught the burnt taste and it's still there. More info is needed like @Adversarious1 said.

You'll probably get more answers if you start a new thread with this request for recommendations. In that new thread I would add some more information other than you'd prefer to have black and gold like do you sub-ohm? Mouth to lung or direct to lung vaper? Do you prefer clouds to flavor or flavor over clouds or a little bit of both? Add also what you mod you plan to use with this tank and you'll probably get more answers than you wanted.

The picture you posted is a tank, what kind of mod are you putting it on?

If you could tell us the name of the mod, the type of tank and coil resistance, that would help us to help you. We would also need to know exactly how hot is "super hot," does it give you a number for watts, volts... some kind of power?

Good one!

Welcome home.

Welcome to Vapor Talk. We're pretty user-friendly around here - unlike some other places. Glad you found us!

For gurgling issues, on many tanks this little trick works well: tilt the tank (mod and all) upside down and, without powering the mod, blow gently into the mouthpiece. This will move the liquid back into the tank from the center post where it accumulated. I do with from time to time in some of my tanks. It might work for you?

And what was the PG/VG ratio of the juice you started with and the one that's in your tank now.

Never heard of them. Mostly, I only order from trusted vendors like our very own Vapor Talk store.

What do you mean when you say all you get is cotton? Do you get a cotton flavor or is it burnt? If it's a burnt cotton flavor, your coil is toast unless you can rewick it, but the burnt cotton taste won't go away.

This may seem like a silly question, but did you charge the batteries? Sometimes, even new batteries need to be charged before using. Also, I would check the connection point. Some coils don't reach as low as needed to make a good connection to the center pin. Other times, even floating center pins get pushed down too far.

Apparently, you're not the only one who has had this problem. I googled Kanger Cupti coil complaints and found this: https://www.ecassoc.org/kanger-cupti-flooded-coil-spittinggurgling-issue-with-some-units/ Hope you can find something in here that helps.

As a mouth to lung vaper who consistently uses a 1.8 ohm coil with a semi-high VG dark, sweet, coil killing juice, I alternate between 7.9W and 10.4W depending on what resistance my coil is at. When brand new, the coil reads around 1.8 - 2.0 ohms. When I'm there, I go with around 7.9 - 8.4W. As I use the tank/coil and the coil gets gunked up, the resistance goes up. As the resistance of the coil goes up, I also increase the power to compensate. I also have the airflow open about 95% of the way. You're getting very good advice from @Bebopand @Walt. You're in good hands here.

Well, maybe it wouldn't be too bad if you had a full hazmat suit on...

We've allowed it in the past so I don't see a problem, but let me float this by you: Vapor Talk the forum is being funded through Vapor Talk the online store that sells eliquids and hardware. If it were me, I would only post the coupon codes if someone asked for them, but that's just me. You do what you feel is right.

Being a klutz, and totally aware that I'm a klutz... there's no way I'd get near that with a ten foot pole. Give me the diluted version, it works well enough for what I want anyway.

I agree with @Earthling789's advice. If you absolutely must take up vaping, then do it with the 0 mg juice. The higher the PG ratio in the juice, the more throat hit you'll get. Some flavors like citrus, cinnamon, menthol... will also give a stronger throat hit. But let me ask you this: why would you want to start a hobby that may not be sustainable? If the FDA's "redeeming regulations" are allowed to stand, vaping as we know it right now will come to a screeching halt and getting vaping gear and juices will become next to impossible or at a price so high that most people won't be able to afford them. I would tell you to find a different hobby, one that you can continue for years without unhealthy repercussions like... playing guitar. Guitars will be forever cool, and people who play guitar are always the life of the party. Some people have been known to make money from this hobby. Might give it a try.

What is the desired amount of nicotine when you're going for? In other words, when you buy premade eliquid now, how many milograms of nic do you get? I'm vaping 3 mg of nic now so even 1 drop of pure 100% nic inside a tank would probably be too much for me. YMMV

Moved this thread to "Latest Vaping Products".

A 1.8 ohm coil in a Nautilus on a Magneto mech mod is fine. I've used that set up on my Magneto and had very good results. It's when you start going lower in coil resistance (subohm), that you want to start being more careful. Be sure to lock your power button on the Magneto before setting it down.

Was a fan of Tolkien waaaay before Peter Jackson even read the books, but then I'm older than dirt, lol.

Don't you mean " palantír " instead of a crystal ball? The difference being that palantir were made by the Elves of Valinor.