Rixter

I haven't done a controlled test, but lowering the current does seem to add considerably more vaping time to my eGo-V. I've been using a 3.2Ω Vision V3 at 5.1v (1.6 amps) for a couple of days and I don't have to charge until bed time rather than early evening like I used to. Finally...an all-day 8w+ eGo and no hot switch!

If you get a 306 atty, you'll need an XL 306 drip tip...it fits over and covers the atty casing instead of fitting into the top like a 510 drip tip does. The reason for the XL instead of standard 306 drip tip is because the standards are too short to stick out of the top of your drip shield. If you get a 901, any drip tip you currently use for a 510 will fit. By the way, 901s are about the same length as an XL carto.

Since you prefer SR, I'm going to suggest IkenVape's IKV 901 SR Atomizer 2.5Ω. IkenVape produces some really incredible atties, and are the only place I know of at the moment who have quality SR and HR 901s. The complete IkenVape 901 lineup (LR,SR, & HR) can be found here. Using an eGo drip shield, I start a fresh 901 atty off by dripping 6-7 drops in, wait about 30 seconds, and add a few more just before vaping. With said shield in place, I usually add 5-6 drops when vapor production starts dropping off. The 901 is a different beast as it has an air vent hole in it's side, and as you probably already know from your research, the drip shield was invented by Empire Mods specifically for the 901 atty to contain the leaking e-liquid and provide a reserve. The big difference between the 901 and 510s/306s is that the 901 seems to still produces good vapor when it's flooded (coil submerged), where the others don't (in my experience). Remember to get a couple because for some reason, higher end atties are a little unpredictable as to lifespan...my last one lasted just over 3 weeks, but I think I popped it by accident when I put it on my VV set for a HR atty. I hope this helps and I'm sure that once you try a good 901, you'll have a hard time going back to anything else. I haven't been able to enjoy my other atties as much since I started using 901s...at least that's where I am now.

Sweet-Vapes: Digital multimeter 1 Vision V3 Clearomizer 3.2Ω 2 Vision V3 replacement coil heads Vapelite: 50 ml DK-TAB 24 mg 50 ml DK-RY4 24 mg 50 ml DK-RY4 0 mg (for mixing down with)

Just let me know what devices you'll be dripping with and I'll post links on what I think will work best for you.

IMO, the 901 atties from either ikenvape.com or empiremods.com are absolutely the best performing and most overfill-friendly atties on the market, but you'll need to use your eGo drip shields that you got from empiremods.com. BTW, you'll also need a 510-901 thread adapter...I like the sealed shorty (stealth) adapters (cheap from empiremods.com) for use on my eGos.

I noticed their posts listing current deals on this forum and was just wondering if anyone here has had any dealings with them. They have some really good prices and I'd like to order some gear from them.

Since my PVs' switches get warm when the current is high, am I correct in assuming that lower current is easier on the switch?

I get roughly the same 8 watts from my variable voltage device set at 5.3v with a 3.5Ω HR atty as I do with it set at 3.5v with a 1.5Ω LR atty . The difference is that with the first combination, I’m using around 1.5 amps, while the second combination results in 2.3 amps. So my question is: which setup drains a battery faster?

Stanley "hookah" Features Stanley is not your ordinary "hooka". A 3:1 "scaled" version of the original, Stanley packs a solid six pack of "kicks". That's right folks he is the table model of 6 Darwins. Each of your vaping friends will be able to adjust their own wattage towards individual vaping Nirvana while cheering for their favourite team. Just like the real cup, Champagne can be sipped from the cup by the victors. This bad boy packs a 6 cell AW 26500 battery battery pack hooked up in parallel, that should see you and your friends enjoy this apparatus for the duration of a series without recharging. YMMV! Be the first to own one,. and you will be the envy of all your hockey/vaping aficionados.

http://www.ecig-parts.com/batteries/Variable-Voltage-Batteries/EGO-V-black-battery-LCD

Great company and fast shipping.

My eGo-V Variable Voltage (3v-6v) 650 mAh Passthrough PV with a Cherry Vapes "The Universal", 510 drip tip, and eGo Drip Shield Cone over an Empiremods 1.5Ω Bridge Free Dual Coil LR306.

CCV has the SmokTech Gripper with Efest 2000 mAh IMR Battery included for $63.15 with free shipping. I hope to pick one up next payday.

EC Blend: 15 ml. Caramel Macchiato 80/20 PG/VG 18 mg. 1 SmokTech Single Coil 510 eGo Cone Cartomizer 1.7Ω Empire Mods: 2 Bridge Free Dual Coil LR306 1.5Ω 1 Premium Bridge Free LR901 1.5Ω Vapin' In The Cape: 2 eGo USB Chargers

I just found your post about what happened.

Pardon my curiosity, but what happened?

I bought one and added the matching cone to get the order over $30 so I could get free shipping. The total was $30.90. It's been my main PV since it arrived and so far it works flawlessly. GET ONE!!!

In lieu of a lengthy review of the eGo-V LCD Variable Voltage Passthrough I bought from ecig-parts.com, I'll just say that I really like it a lot. I like the wide range of voltages available (3v-6v in .1v increments). I like being able to see the voltage I'm set at and remaining charge with a glance at the LCD. I like being able to plug in the USB cable to charge it without having to remove the cone and DD (i.e. atty/carto/tank). I don't like the flush-mount fire button. I can't just feel for the button so I have to look at the device to find it...maybe I'll get used to it soon. I also don't like the fact that the cable is not a standard mini-USB, but I do have a digital camera that uses the same connection, so I have a backup if necessary. Kudos to ecig-parts.com for getting it to me so quickly! I ordered it Tue, Oct 9, 2012 at 5:41 PM, and it was in my mailbox on Fri, Oct 12, 2012 at 1:00 PM. Fastest shipping I've seen lately, and I'm completely satisfied with their service.

Sorry...I guess I should have read all the posts before asking, "What strength of nicotine are you vaping?"

What strength of nicotine are you vaping?

EC Blend offers hundreds of flavors, strengths, and mix options, including one they refer to as "Reduced PG": "REDUCED PG : Flavoring is PG based, if nicotine is selected it is added as VG based, and the remainder is filled with VG." They also have a good selection of "100% VG Base" juices, as well as "All Natural & Organic 100% VG" blends. Thier prices are some of the lowest I've seen, too.

Stocking up for the coming zombie apocalypse, I see.

eGo-V LCD Variable Voltage Passthrough to arrive today. I plan to test and review it over the weekend.

Yeah, with a 901 atty, it's just funny looking, as you can see in the top picture below. The bottom picture is what it should look like with a 306 atty. I say should because I don't have a 306, so I just stuck the Cherry Vapes Universal down inside the cone for the picture. I did, however, just order an Empire Mods Bridge Free Dual Coil LR306 1.5ohm to use the Universal with (and a Delrin 306 XL Drip Tip just in case the Uni doesn't fit). I've been curious about the dual coil atties for a while now, so I went ahead and got one...damnit! (will this never end?)