Rixter

Any luck with the Flavor Flush from Texas Select Vapor?

From EC Blend's Novelty Flavors page: Bacon Black Pepper Butter Carrot Clove Crab Legs Cucumber Dill Pickle Ginger Kettle Corn Mitch Morgan Whiskey Shot Pizza Ria Popcorn Roast Beef Roast Chicken Smoky Black Pepper Bacon Tomato Soup Worcestershire Sauce

Pay attention to what Phil says about high powered vaping starting at 7:22 of this video

I often run 10 watts with a 1.8Ω hand rolled Kanger Protank coil, and a mechanical mod with a freshly charged battery (4.2v) paired to a Genesis RBA with a 1Ω coil yields just over 17 watts (V² / R = P). Users of rebuildable atomizers can testify that it doesn't "burn the juice". In fact, I know of no other device that produces the amount of flavor or vapor that an RBA does (an HH.357 dripping atty comes awful danged close with the flavor part, though).

Not necessarily...you can make a 1.8Ω coil from just about any gauge wire. The problem with higher gauge wire is that it's thinner so it tends to burn out easier. Most factory-made coils are made with very small diameter resistance wire, so you're pretty much limited to around 8 watt with them. I wrap my own 1.8Ω BCC coils (Kanger Protank, EVOD, etc.) using 32 gauge Kanthal, and I have never had one pop...even at 10 watts. I use 29 gauge on my Genesis RBA coils and vape them at 15+ watts...I've never had one of those pop either.

You can run any coil at up to 8 watts without much of a risk of burnout, regardless of its stated (or metered) resistance. Above 8 watts, you risk popping your coil if it's made with a higher gauge (smaller diameter) wire.

What a coincidence..I just bought a KPT2 from EV Cigarettes for $20.90 shipped using coupon code "ecf10%" (why is there no "VT10%" coupon code?). BTW - EV Cigarettes has the fastest shipping I've ever seen...I placed an order on a Saturday afternoon and got my shipment on the following Monday afternoon.

...and isn't that a strange phenomenon. I can put the same juicer on eight different mods and get eight different results concerning taste and performance. I'm certain it's got to do with slight variances in power due to each mod's various connection elements (center pin, threads, insulators, etc.), but it's really weird how much of a difference there is from one mod to the next. Oh, yeah...I almost forgot... I bought a Grand Vapor Private V2 clone. Works great with a Kicked 18350 and Tatroe Tank.

I'm pretty sure his Nemesis is still vented...probably on the bottom or side of the battery tube. I was just commenting on why mods have vent holes in them.

Your K100's battery compartment will probably be too short to hold an 18650 + a Kick, but an 18500 + a Kick is about the same length as an 18650, so if it'll hold an 18650 without a Kick, you should be good with a Kick and an 18350, 18490, or 18500.

The vent holes in a mod are so if your battery vents, it doesn't turn your mod into a pipe bomb.

This evening, it's Rixter's Turkish/American Blend, Rixter's RY4, Rixter's Absinthe, EC Blends' Caramel Macchiato, EC Blends' Chocolate Malt, Apocalypse Juice's Resurrection, & Mad Murdock's Radiator Pluid...all lined up and in no particular order, as I play Dragon Age Origins. Life is good.

Taste buds are weird.

The major benefit here is to be able to use the RSST (a great little RBA) with juices that may cloud or crack its original polycarbonate tank.

I get dry hits on all of my RBAs if I don't leave the filler plugs/screws out.

I own three of these: Sigelei Kick Clone from Exhale Vapors - $15.98 *EDIT* Sorry...I just checked and they're currently out of stock, but Bucky's Bargain Vaping has 'em in stock for $17.69.

I buy propane and propane accessories.

Bernzomatic UL100 - Basic Propane Torch Kit - $12.97

That puppy will oxidize a SS mesh wick in about two seconds.

How about a flip-top cell phone holster with a belt/pocket/waistband clip on the side? You could make a cutout on one end for your juicer. Gnome sane?

Actually, twisted wire doesn't quite cut your resistance in half for a given length. You would think it would be half, but side by side metering shows about a third less resistance. That's because twisting two pieces of wire together adds a little length to both pieces, effectively adding a little more resistance. The tighter the twist, the more resistance you add, but generally you can figure on a third less resistance than untwisted wire. PS - I didn't figure this out on my own. I think it was CascadianExotics.

Wouldn't you know it? I was just checking out Coast To Coast Vaping Supply's site and found their Hybrid Elite on sale for $37.99 shipped! Available in black, silver, & gold.

Try using a higher gauge (smaller diameter) resistance wire if you wanna keep your dual coils the same approximate length while increasing the resistance level of each coil. They're micro-coils...the wraps are supposed to be touching, but yes, make sure your coils & untrimmed leads aren't shorting against the RDA's surface.

From 1 x Graduated cylinder, glass, 50 ml $4.90 1 x Funnel, glass, 75mm diameter $2.95 1 x Stirring rod, glass, 6" $0.60 Item total: $8.45 Shipping: $5.95 ORDER TOTAL: $14.40 Yeah...I caved.