Rixter

I couldn't really tell from the pictures above, but your ecig looks like it has a "button band" instead of a fire button. If it is, sooner or later, the "button band" is going to break...fact of life. Don't despair, however - replacements can be found here (among other places).

Yeah...that's the box the IGO-L came in, along with a bag of spare parts, mesh, & wire. The Magneto is in its shortest form factor (18350) in the picture, so I guess as a point of reference, it makes the IGO-L box appear larger.

Got an IGO-L ($11.41 shipped from Triangle Vape) for my new Magneto.

Here's my 2¢. It sounds like you got yourself a really nice mod early on. Congrats on that. Set the ring on 8 (watts), screw whatever atomizer, cartomizer, tank, etc., onto it, and you should be good to go*. The 134 is going to compensate its voltage to give you a consistent 8 watt vape, regardless of your delivery device's ohms rating. As far as juice goes, I haven't come across any juices that scorch at 8 watts. I use RBAs on mechanical mods a good bit of the time and that single coil setup yields roughly 15 watts on a freshly charged battery...as long as my wick can feed the coil, I don't get a burnt taste. * - Kanger Protanks can be a little finicky...some mods' center-posts are longer than others, pushing the KPT's center pin in too far, which blocks a lot (sometimes all) of its airflow.

Vapor Rater is a site I use to keep current on new juices and how they stack up.

On this fine Christmas morning, I'm 1Ω vaping Rixter's Two Rivers Tabac in an AGA-T2 on my new SmokTech Magneto, a Christmas present from the missus. After a few minor adjustments (yup...it's adjustable), the Magneto works flawlessly!

'96 Dodge Ram 1500 Extended Cab Pickup Truck.

Just fill it back up with fresh Pluid...then you won't notice the "old" Pluid taste.

That's because with a fresh battery, you're vaping at almost 10 watts (not that there's anything wrong with that).

Try removing the drip tip's O-ring, running a wrap or so of dental floss around the O-ring's channel, and replacing the O-ring. That should snug things up a little.

lol

Merry Christmas, everybody! Today I bought a SmokTech Magneto mod for $43.24 shipped from EV Cigarettes.

After my first experience with re-coiling and playing around with a friend's RDA (a SmokTech Octopus), I decided to break down my AGI and try using it in RDA mode. I think I might like this configuration better than its genny form. It really cranks out the vapor with a 1Ω 29g 6/5 coil around a single 3½mm silica wick. Tasty.

I thought it was just me. Seems like all jobs suck. I guess that's why they call it "work".

Youde AGA-TD & AGA-T³ RBAs.

Try

Tonight, I'm vaping "Calm The F*** Down!!!"...a Rixter's eJuice original. At 30mg., It's more calming than a bottle of wine and some smooth jazz. + =

Most of the "experts" recommend using IMRs in mechanical mods. I buy AW IMR18350s from Vapor Kings. Here's some information by Phil Busardo on why IMR batteries are recommended for use with mechanical mods & LR coils.

I love my AGA-S. Don't forget to get a drip tip for it...it doesn't come with one. The SS one I have on mine can be found here for $5.99.

AGA-S Rebuildable Genesis - $12.95 from Sweet Vapes Technical specifications : Sealed 510 connector Length: 50 mm ( without drip tip ) Diameter : 15.86 mm E-liquid capacity: 2 ml Airhole diameter : 1mm Stainless steel Weight : 45g

Nice! MicroStick by Mini Ecig As for finding an RBA for it, I recommend the AGA-S ($12.95 from Sweet Vapes). It's 15.86mm diameter should fit perfectly inside the MicroStick's 16.5mm atomizer hole, and the AGA-S is only 5mm taller than the Mini Ecig MiniGen SS (shown installed in the MicroStick above), and over $50 less. Youde's AGA-S

I found this pic of the Aqua: This thing is $174.95...I don't get it.

Reckon there's room for 8 micro-coils in that?

Congratulations on your son's wedding, and be careful in Memphis.

Every week, I soak it in alcohol (PGA) for an hour and then blow it out. That seems to keep it clean.