mse12

Agreed I'd say the vast majority will vape more than smoke. It's easier to do more frequently when you can actually breathe afterwards. Welcome.

Your basic two tanks are clearomizer types such as what jeffb linked to and carto tanks such as this. Carto tanks are MY preference but definitely not everyone's. Low resistance or standard will not have much meaning if you get a VV mod such as a lavatube. In the day before everyone and their brother had VV LR would give a better vape to those with lower voltage devices. The vapor is warmer and just generally more appealing for most. The SR would give a cooler vape which some liked too. I say give both tanks a shot. You may like both or only one of them. With the carto tanks you will be required to purchase and punch cartos. You can buy them prepunched if you want, which I would suggest if you've never done it before. Hopefully this helps clear some of the confusion up. Happy vaping and welcome to VT!

That's correct. I just drip and blow them out between flavors. If they are TOO different I may run hot water through them and let them dry over night. Make sure you still blow them/shake them out. I typically just blend them together because I'm too lazy. That's just me.

I vote for TVR's Ginger's RY4...that's my daily vape, and has been for several months. My all day vape used to be Pink Spot but once I tasted Ginger's Ry4 I haven't strayed. Just my $.02.

Welcome and check out the modding sub.

Welcome

I've only seen an e-cig in one other movie but the name escapes me atm.

Just a thought, I once had a clove sample from Johnson creek that tasted just like the clove smokes I remember. I don't typically care for jc juices the clove was spot on.

You'll quickly find that the most of us don't use many stick batteries. Welcome aboard!

I have two at least but typically both the same flavor...maybe I'm odd.

I think we may have just lost a vaper before she even got going...that sucks.

So as most of you know I picked up a Vamo from electronicstix a couple weeks ago. This unit was defective as the top battery tube kept falling off. Long story short they sent me a replacement and I received it yesterday. So I took it to work with me last night and all was well. I carry a duffel bag to work because I bring a change of clothes to shower in the morning at the end of my shift (very dirty work in a factory). So I make it through the entire night and the vamo is perfectly fine. At the end of the shift I toss it in my bag before I take a shower. In the pocket with this vamo are typical junk from car keys to a SAK (swiss army knife) to deodorant etc, you get the point. Well I take my shower, clock out, walk out to my truck. I vape it on the drive home and didn't even really look at it. When I get to the house I sit it on the kitchen table and notice there is a line about 5mm wide almost all the way up the device where the finish is GONE! I'm seeing bright yellow brass now where an hour before was the gun metal finish. Seriously? It gets moved around a little in my bag and completely looses the finish?! So here I sit vaping my vamo, which at this point has been in my possession for all of maybe 28 hours and it is cosmetically ruined. Nice. This mod while performing well has been a royal PITA at this point. I'm about to shove it to the bottom of my vape box for use as a backup. Not happy with this pv at this point. Sorry for the rant but just letting you know before you pull the trigger on an order.

Yeah I've seen at least one USA vendor that has them available for pre-order they say they will ship on the 18th...

Personally I like 50/50. I don't know how to help other than say try out a few other delivery systems. You could try dripping for example or just a simple cartomizer. I enjoy boge 2.0 cartos. I also drip but only at home. I hope you can figure something out! Don't give up.

Hang in there. Are you having trouble with your gear or just not getting what you need out of it? What kind of setup are you using? Don't stress over it that won't help. It's not the end of the world if you have to smoke an analog. I don't recommend one but then again who would? Lol so what's going on? Is it gear or stress or what? And welcome to vapor talk btw! Glad you're here!

It should work. My ego charger has a lower amp output than my cell phone charger. The ego charger puts out 0.7 while my cell phone puts out 1.3. The biggest difference here is just a slower charge. No big deal though. That's just been my experience and yours maybe different.

Haha, that pic is nice. Mine was just playing around at work with a crappy phone camera. It was in my department's "smoke area" and I'm usually the only vaper around out there. I'm not going to be able to carry this AGA-S to work again until I remedy this o-ring situation. The cap is far too loose to be comfortable carrying in a pocket.

Sadly no, it was an Irish cream. It was WAY too strong. Like almost gag strong. I took about 4 pulls off of it before it got emptied out.

Kanger needs to drop the ego shenanigans lol I want a kanger 510 t3 lol.

Welcome. Can't go wrong watching Grimm. Never met him but seems to know his stuff. I have probably watched like 90% of his uploads...yeah I have no life. Lol

For the SB you need a kick...that's the easiest way. Drop-in module that runs about $48. Made by eVolv. Look it up on the YouTubez.

Welcome! Glad to have you here!

Lol keeping it old school huh? :p

Yeah a B&M should have everything to get you going. I dunno how many would carry a buzz but you may find one.

Hey no prob. I've heard nothing but good stuff about the buzz pro. Get a 510 connection, that's pretty much the industry standard at this point. As far as attachments you'll want at least one or two dripping atomizers, a five pack of cartomizers, a couple different clearos (like vivi nova). After you get the basics down you can get into carto tanks, rba's, etc. Of course you also need batteries, a charger, and last but not least juice. Oh, and a couple drip tips...that should get you rolling.