CNubel

Watch and enjoy

Hey Bro.

I realize this is an old conversation, but I really hope you'll come back and shed some light on your comments. They don't seem to make sense and I'm sure its a simple misunderstanding. Your atty and your carts have nothing to do with the Silver Bullet. The SB is simply a tube, a switch, and a battery connector. The atty and cart have nothing to do with the SB at all and are your preference on which to use.

I've owned a SB for many months (unfortunately, I lost it but that's another story) and have used it with 6 different attys, cartomizers, carts, and anything else you can probably think of. The battery case and switch are comfortable to hold and use and it is probably the best made PV on the market.

I hope you'll come back so we can understand what you meant.

Vapor Talk – Dulcis 16mg

This stuff rocks. I bought this because I heard it was the Vapor Talk version of RY4. It is probably one of the best RY4 juices I’ve had. It has a mellow tobacco flavor with a hint of caramel and some other flavors that blend together into a very relaxing and flavorful vape. I’ve been vaping Dulcis for the past three weeks and it has become my everyday vape.

On a scale of 1-10, I’ll give this a 9. It really is very good. If you like RY4, give Dulcis from www.VaporTalkStore.com a try. I think you will be very pleasantly surprised.

Vapor Talk – Midnight 16mg

I got Midnight from www.VaporTalkStore.com as a sample when I purchased some other juices from them. All I can say is “WOW”. This juice blew my doors off. This has a wonderful strawberry flavor with some other subtle flavoring mixed in. This makes for a very adult flavor which is very soothing to vape and the flavor keeps coming through. Let me also add that the strawberry is not overpowering at all. It is in the foreground, but the other flavors mellow the strawberry into a well balanced and pleasurable vape. The flavor is very much like a sloe gin fizz.

I highly recommend trying this one as I don’t think you’ll be disappointed.

On a scale of 1-10, I give Midnight a 9.

Even though we think PVs have been around a long time, they havent. PVs are still a very new technology. Most people dont know what a PV is yet and most of those who do have only heard of them and never actually seen one. In marketing terms, we are known as First Adopters.

A first adopter is a person who embraces new technology before most other people do. First adopters tend to buy or try out new products, hardware items, programs, and new versions of existing programs, sooner than most of their peers. According to a theory called Diffusion of Innovations (DoI) formulated by Everett Rogers, first adopters make up 13.5 percent of the population.

PVs are constantly changing and improving and there is much more left to invent. Carlos is now marketing his Juice Box which contains a bottle of juice with a pump that feeds his custom made atty. He claims his custom atty has been working for over 6 months without a failure. Others who have reviewed the Juice Box say the same thing about the atty.

I can see a day when there is an electric pump that feeds the atty when you press the button to vape.

I would also like to see more mod makers using Digi-Keys to convert 6v CR123s to 5v so that we can hit the sweet spot. For me personally, 6v is a little too strong and 3.7v is a little too weak. I love my 5v mods like my VP passthrough and my home made Dremel Tool mod. The next battery mod I make will be one using a Digi-Key so I can have a 5v battery PV.

Attys also need to be improved. The Chinese attys were all using suck. There is no reason why an atty should give out between 2 weeks and a month. Attys should last a long time and sooner or latter someone will come along with an atty that will fit 510, 801, 901s etc, that will last a good long time. Carloss atty is a good example of what can be invented but as I understand it, it doesnt fit any of the standard batterys that we are currently using.

The imagination and innovation of the modding community on all the forums never ceases to amaze me. I am no modder. I am just starting to play with some very basic mods and am in no way in league with most of the modders on the forums.

Im sure there are plenty of other innovations others can come up with. In fact, it would be interesting to see a list of improvements others would like to see in PVs. It may be a good idea to start a thread called; What would your dream PV look like? and let people post ideas for improvements to current PVs and Mods. It may inspire someone with the technical background to make it a reality.

If you think there is nothing left to invent, remember that Bill Gates said once that "640K software is all the memory anybody would ever need on a personal computer". Even Gates couldn't see the future of the software he created.

yeah, and its cheap. Its a good mod if you've never made one, or if you want a 5V passthrough that doesn't need a computer. Its very good and it vapes like a champ.

looks great! I like the the tool brand too! Big fan of Harbor freight.

I added a pressure switch to the mod this evening. I learned a few things about plastics and how they crack. Its ugly, but the switch is in securely and it works. But that’s what first mods are for...you learn a few things that you don't do, or do differently, on the second mod. However, I'm a lot more comfortable with the ugly pressure switch in place. It doesn't matter if I leave the rocker switch on accidentally now as it is now just a safety switch.

Next come experiments with adding LED's. But I need to do a little reading before I add those.

Its extreamly easy, and its fairly cheap which is good for your first one. If it breaks, its no big deal.

Woah, pretty awesome mod, does seem easy to do!

I'm about to run out for a bit. I'm going to pick up a pressure switch at radio shack...I spend a lot of time worrying if I have the rocker switch in the "Off" position. Its like leaving the house and wondering if you turned the oven off.

If you do use tape, I suggest on putting the fitting a pinch lower then what you have it in the photo. It should be in the area where the shaft was held into place. You have it very close.. that's why I say only a pinch. Wrap plenty of tape around the atty so you can "smash" the enclosure on it... If you get too much so you can't smash it.. remove a little of the excess at a time. It will also help to make sure you have a atomizer + cartridge attached so you can line things up... When your done you should be able to pull tightly on the atomizer without it moving... it should be rock solid & not budge at all. You may also want to add a push button switch & use the rocker as master.(for safety reasons) Beyond that it's personal preference.... LED's, etc. I removed the OEM stickers, you can use a label remover. Liquid is preferred as it is plastic, but a heat gun should work too. Other then that this design is about as simple as you can get.

here is a video on the Dremel Tool Mod.

I have made this mod and it works great. In fact, it was the first mod i ever made and was very, very easy to make. Once I got the parts I needed, it took me about 20 minutes to assemble.

For those of you who may be interested in making this mod, I put together the following parts list and where you can get what you need. I am lucky to have a Harbor Frieght hardware store near my house so I went there and picked it up at the store. The other parts I needed to order.

Dremel tool mod
Parts:

Cheap Dremel Tool: ( $9.99 )

Battery Connectors: ( $3.00 )

5 Volt Power Supply at 1000mA. ( 5 Watts ) ( $11.99 )


You will also need a few things from your local hardware store.

Electrical tape
Masking Tape
Soldering Iron
Solder
extra wire...I just cut up the cord from an old adapter
Multi Meter (Optional) Not really needed but get one. They will save you a lot of headhaches.

I used putty epoxy to adhear the 510 battery connector to the casing. I would suggest using masking tape as suggested in the directions. It will allow you to change the battery connector if you want to switch to a different atty and provides a tight fit. Using Masking Tape will also let you make sure your atty is stright. If you look at mine, its a little skewed.

Homemade dremel vaporizer - Easy MOD for beginners + 510 smooth smoke info

IMAGE IS AT : http://img691.imageshack.us/img691/6375/dremelvapor.jpg

Let me start by introducing myself... My name is ZeroNullity, I’ve been an e-smoker for awhile and a “former” smoker much longer. I’m also a Electronic Engineer & Unix Computer Administrator . I thought I would share this easy mod with everyone. The good thing about this mod is you don’t have to do any modifications to the housing just unscrew it put your atty & wiring in. I currently have it hooked up to a power supply so that I can plug it into any 110v~ outlet. However there is plenty of room in the case if you want to add a rechargeable battery & charging circuit …. If you have soldering experience it takes less then 10 minutes to make one of these.

Required Materials:
1.Cheap dremel knockoff – ones found in cheap silver/metal cases. You can find them in many different colors I just happen to have a blue one on hand.
2.Dead battery from your favorite e-cig. You’ll be using this for the atty fitting. I use a 510. But any atomizer battery fitting should work.
3.Power source – Wall wart (output rated at 4w-5w), Variable Power Supply, Battery/Charging circuit or USB Circuit (with heavy protection circuit) depending your personal preference of power.
4.Good atty, cartridge, & e-liquid.
5.Tools – screwdriver, soldering iron + solder, and masking tape is all you need.

Procedure:
1.Take apart cheap dremel knockoff casing. Remove motor, shaft, and key chuck.
2.Wire your atty & power circuit into place. I won’t get too detailed here… because it will depend on your needs. If you want to use a power supply like I do (variable power supply to adjust the heat of the atomizer) or maybe you want to use a battery, etc. You may need to add some masking tape around the atomizer fitting so it will stay in place when you screw the housing back together depending on the size of your fittings. Don’t use electrical tape as it will slip when heated up. There is even a extra hole to put a led/switch were the key chuck use to be. If you need any help on this stage with wiring/soldering just let me know.

3.Assemble & use.

Power info on the Joye 510 Atomizer
The heating elements on these units are rated about 4-5 watts.(based on vaping) 4 watts is perfect very smooth smoke…. Or if you want a massive amount of smoke you can go around 5 watts. (be warned it uses more liquid, but will produce more smoke)
Please note I use wattage to describe the heating element. I see too many people using only voltage… when they should using power/wattage to describe the power source /destination. If you use a different atomizer your wattage requirements may very.. As each atomizer uses a different resistance wire for the heating element.
When I get time I’ll post some more of my modifications up. I’ve done many experiments with lasers, ultrasonic, microwaves, & homebuilt heating elements. I’m currently working on a vapor king monster similar to a herb vaporizer with a long lasting heating element for home use.

For wattage/power calculations -
multiple voltage by amperage.
For example
5 volts @ 800ma 5 x .800 = 4 watts
5 volts @ 1000ma 5 x 1.000 = 5 watts
12 volts @ 350ma 12 x 0.350 = 4.2 watts
12 volts @ 400ma 12 x 0.400 = 4.8 watts

I need to get permission from the forum gods for this one. I got the step by step from another forum. I built it today and it was very easy. It was the first mod I ever built and its great. Its a 5v 510 passthrough that plugs into the wall instead of using a USB port. Its extreamly easy to build. I even made a video to go along with it but it refers to another forum. If it is OK with Chris, I'll copy and paste the step by step.