willmon22

Nice stainless steel flashlight... Just kidding. It just looks like a flashlight. Kind of funny the site says: This device does not contain any circuitry nor does it have a button or switch!: This mechanical mod is exactly as cool as I had hoped, the button is large and easy to push and the design is very neat!

Yeah anything over 35 is expensive for me. I can't really afford to just keep getting new things for even higher prices. Really wish I could but I am just having job issues. Anyways I like my ego-vv more than enough to not think about getting a new battery for awhile.

Looks a little advanced. I wonder how high of voltage it will go. Any other joye tech product doesn't go as high as 5 I think.

Seems like an expensive mod. Let us know how it works.

Yeah, I have seen them being completely built and some in kits. I don't know how it would mixed with kits and completely built ones. I will be sure to let everyone know if they are worth it when I get it.

Does it have the steel mesh and the coil wires with them?

Sure vapinmamma I will try it out. I have a dual coil and it doesn't seem to give me the hit I want even with 6 volts. Seemed to of spelled that wrong.

Ok, I will do that. I haven't used it any after I first tried it. Seemed to have no flavor. I got it on like the first or somewhere in there so it should probably be good about now. I don't have it in a dark place but at night with lights out it is pitch black.

I wouldn't mind having one. I was wanting to try a rebuildable atomizer to try it out and see if it worked any better than my DCT or clearomizer.

Well if you do that would be good. I was going to do so but I don't even exactly have but just 10 to spend. So I will just save it and wait til later. I am still waiting for my organic eliquid I ordered it should be here tomorrow but you know how the usps "estimated delievery time" is. Seems like lately each time it is a day or more late.

I found them here: http://vulcanvape.myshopify.com/collections/cartomizers/products/copy-of-smoktech-xl-dual-coil-cartomizer-black it said a total of 7.50 with shipping so I think I may go for them. I heard that the vapor from these can get really hot at even 4.5 volts. I have a dual coil tank it would seem that it takes it up to 6 volts to get a little warm but it doesn't seem as warm as I think that it may be able to get. Or am I just crazy please let me know and give me a reply please.

Yeah it would seem lots of places are starting to carry ecigs. But what people really want instead of just ecigs and their cartridge replacements is eliquid. If you start selling it as a refill instead of just cartridges and tell them how to do it then they would definitely be happy to keep coming back for more. As the cartridges are more expensive when they are prefilled. But then you would end up having to carry blank cartridges as well. So if you could do this then it would be off on a good start. I know that mister-eliquid lets you get things in bulk and he has good prices for the basics. If you decide to do that just let him know that William Walters told you about him.

You are doing great christopher. I don't think anyone could ask for a better forum. My main reason I think it is the best is that the creator is actually sticking with the forum and posts in it all the time. I haven't seen any other forums that have done the same. Or maybe I haven't paid attention very well or just don't pay attention to other forums that just don't perform well.

They most likely didn't give it time to wick or they just got a bad one. I have a regular clearomizer and I had the same problem. I just started to use my clearomizer again after several days and it still has liquid in it and I decided to try it. I am getting so much vapor with it on my regular ego it isn't funny. The throat hit is okay but it is most likely because my battery hasn't been charged fully in awhile and might be dead. I am actually charging my ego vv and will get it another go on it later hopefully I will get what I am wanting from it.

I really need to learn some of this electrical mumbo jumbo. Maybe I will then know more about posts like that. Anyways I am not sure if there is any atomizer that can actually work with 6 volts without any burnt taste. Unless there happens to be one that is greater than 3 ohms. Or perhaps a dual coil atomizer then it would probably be fine at any ohms but I am not quite certain on that as I only use cartomizers.

Just ordered this from ecblend: 1 x AN&O Orange Cream 100% VG - eLiquid Flavor (Select Bottle Size: 15 ml $6.95, Nic Strength: 24 mg - Strong, Base Mix 100% VG: 0% PG / ***100% VG***, Add Sweetener AN&O: Add Enhanced Sweetener) 1 x Blunt Tip Needle Cap 1 x Tank Replacement Cartomizer - SmokTech - Dual Coil (Unit Size: Single Unit, Select Resistance (ohm): 2.5 ohm, Select Color: Stainless Steel) AN&O is All Natural and Organic the mix is actually suppose to turn out in 60/40 thickness but I guess I shall see as this is the first time I have ordered the AN&O. Hope this cartomizer has a notch unlike one of them I ordered last time. But I guess it is no big deal as they credited it to my account to get a replacement.

You could just try to drip the juice directly into the cartos. And with 100%vg I have heard you won't get very good throat hits on them if any at all. Usually it is the first hit on almost anytime you fill a cartridge the hit is outstanding if not overpowering sometimes. This usually occurs when the cartos haven't absorbed the liquid entirely. Also as a note not all cartos absorb 100%vg very well. You can always just let them sit straight up and let them absorb longer and hope for the best. I just ordered some 100%vg and I am hoping it will be good. It is suppose to be like a 60/40 mix because of the ethyl alcohol or something. Hope this helps you out.

I think I am just going to stick to my 6ml smoktech tank and clearomizer. I really don't like the clearomizer but maybe I will like it when I get another one.

Well the response I got from ecblends was this: Our 100% VG AN&O flavors are not a thick as pure VG. The flavorings are suspended in Ethyl Alcohol, does thin the liquid down to approx. The viscosity will be around the same as a 60/40 base mix. So if this is the case then it should be fine with my tank with 2 holes in the cartomizer right?

I don't see why it wouldn't. As an ego has threads for a 510. I have my smoktech dual coil tank with 510 threads on my ego vv and it works fine. I believe all 510 threaded things will work on an ego.

http://www.litecigusa.net/Vision_510_Nano_Clearomizer_p/510-nano-clearomizer.htm Not sure if this is new or not. But I found it at litcigusa in the new products section.

Well you could just go simple. Just size up some brackets to your ecig after that screw them to the wall and there you go. You can slip them in the bracket and then it will stay upright and won't fall either. Not sure why you would need to do this unless you have something like a clearomizer in which could flood if it isn't kept upright. I just take mine off and let them sit upright.

I have one too. I will try to make a video and post a complete review if I can.

Well the cartomizer I have has 2 holes do you think it will hold up?

Ok, will it work in my CE5 clearomizer then? As I don't want to get this organic stuff if it won't work with it. If not what do I need I would really like to try some out. I found some on ecblend and it is the same price as all their other eliquids instead of inflated to over double the price of regular eliquid on all other sites that have the organic eliquid.